Age verification
Please confirm that you are 18 years or older to enter the shop.
Have patience...
You are not old enough to visit the shop yet.
Products
-
Eagle Vision Eagle Vision - Pard NV008S / Sytong Convertor Rail for Original Mount
Pard NV008S / Sytong Convertor Rail for Original Mount Own one of the Original Pard NV008 adjustable mounts from Eaglevision - have you upgraded to a new Pard Version NV008S or have the Sytong system. This top rail allows you to change the top rail on the original mount to the new hole configuration. This is only the Pard NV008S / Sytong Rail - you must have the original mount to attach this to. This is for the rail in the picture ONLY. 1x top rail2x allen keys (two different sizes)6x side aluminium washers (not included with NV008, NV008P, NV008LFR) Please note:The washers must be placed between the screws and the mount.The washers are flat and once they start being tightened their shape adjusts to the countersunk holes. See the fitting guide. Click Here.
£29.99
-
Eagle Vision Eagle Vision - 108 MOA One Piece Elevation Adjustable forward/Backward Picatinny 125
108 MOA One Piece Elevation Adjustable forward/Backward Picatinny 125 We have designed and developed an amazing new Picatinny mount.We are very proud of this product as its development resolves some issues for shooters, who depend on the reliability of a solid mount. This is the shorter version of the Original Pard Mount. 12.5cm Top Rail. Main benefits of using this mount: 1. NV scope:It can be directly fitted to the Pard 008 008P 008LRF ( will not fit NV008S ) 2. Adjustability:FULLY ADJUSTABLE, FORWARD or BACKWARD , ELEVATION, WINDAGE, EYE RELIEF AND HEIGHT ADJUSTMENT, that allows the scope to move vertically and horizontally along a guided path, and lockable in different positions, using 3x or 4x or 5x screws on the side of this mount. 3. Combined with a Scope cam:This mount allows users to adjust their scope forward, backwards, or adjust it vertically to align the scope with their eye relief or eye level.Users wishing to use their scope camera and record a session while shouldering their rifle, but the screen needs to be further to their eyes, or, for some applications they might require the camera to be closer to the eyes, such as pard/ Nightvision scopes etc. 4. Longer range shooting:long range before running out of adjustment on the turretsis the ability for users who need to reach out further but are restricted by their current mounting system.By keeping the front mount at it’s lowest and elevating the rear mount to the highest point you can zero in your gun far beyond, without using the clicks on your turrets, hence keeping the optical centre of your scope intact. 5. Multiple rifles:This system can be used to install scope mounts for the owner’s of multiple rifles who require to use one scope for all of their rigs by installing one Infinity mount to each rifle.They can zero then just swap the scope between them, with little need for turret click adjustment. 6. Durability:This product is robust enough to be installed on heavy recoil rifles, up to .308 caliber. Technical information for the new ‘INFINITY’ mount: Length: Top Rail 12.5cm / Bottom Piece 12.5cm / Rail Section 8cmProfile height from bottom of the mount to middle of the top picatinny rail, 21mm.Total height: 30.30mmAdjustable Height: 4.5mmWeight: 175 grams Product includes: 1x Infinity picatinny mount3 x Allen keys, (two different sizes)5 x side screws1x m5 spring screw4x pard 008 attachment screws1x Waterproof case Torque calculation:Adjustable side screws maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.Picatinny nuts maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.
£101.99
-
Eagle Vision Eagle Vision - 2 X 26mm 11mm Dovetail to Picatinny Adaptor Convertor
2 X 26mm 11mm Dovetail to Picatinny Adaptor Convertor Ideal for BSA - Air Arms - Daystate These are 2 X 26mm 11mm dovetail to Picatinny Adaptor Made from aluminium Choose the right size for your Application. Package includes: 2 x 26mm adapter - Length 2 x Allen key 2 x grab screws 2x spear side screws Profile height 4mm 2 adapters per pack Better than the cheap Ebay ones.
£17.49
-
Eagle Vision Eagle Vision - 2 X 26mm 13mm Dovetail to Picatinny Adaptor Convertor
2 X 26mm 13mm Dovetail to Picatinny Adaptor Convertor These are 2 X 26mm 13mm dovetail to Picatinny Adaptor Made from aluminium Choose the right size for your Application. Package includes: 2 x 26mm adapter - Length 2 x Allen key 2 x grab screws 2x spear side screws Profile height 4mm 2 adapters per pack Better than the cheap Ebay ones.
£17.95
-
Eagle Vision Eagle Vision - 2 X 37mm 11mm Dovetail to Picatinny Adapter Convertor
2 X 37mm 11mm Dovetail to Picatinny Adapter Convertor These are 2 X 37mm 11mm Dovetail to Picatinny Adaptors Made from aluminium - Eagle Vision HIGH quality. There are two ways of how you can use this product: Option 1: Take the side grab screws off, place the rail in your scope mount, then while you’re tightening your scope mount it will grab and hold your rifle Dovetail Rail.Option 2: Place the adaptor on your rifle rail, tight the side grab screws so the adaptor will stay on your rifle rail. You can secure the adaptor by grab screws from top for rifle with some recoil. Package includes: 2x 37mm adapter 2x Allen key 4 x top grab screws 2 different length 2 x spare side grab screws 2 x spare ends grab screws Profile height: 4mm Better than the cheap Ebay ones.
£23.98
-
Eagle Vision Eagle Vision - 2 X 50mm 11mm Dovetail to Picatinny Adapter Convertor
2 X 50mm 11mm Dovetail to Picatinny Adapter Convertor These are 2 X 50mm 11mm Dovetail to Picatinny Adaptors Made from aluminium - Eagle Vision HIGH quality. There are two ways of how you can use this product: Option 1: Take the side grab screws off, place the rail in your scope mount, then while you’re tightening your scope mount it will grab and hold your rifle Dovetail Rail.Option 2: Place the adaptor on your rifle rail, tight the side grab screws so the adaptor will stay on your rifle rail. You can secure the adaptor by grab screws from top for rifle with some recoil. Package includes: 2x 50mm adaptors 2x Allen key 4 x top grab screws 2 different length 2 x spare side grab screws 2 x spare ends grab screws Profile height: 4mm Designed to work with all our Scope Mounts. It may work with other scope mounts as well, however we cannot guarantee this. Better than the cheap Ebay ones.
£28.98
-
Eagle Vision Eagle Vision - 2 X Dovetail To Picatinny Weaver 37mm / 13 mm To 22mm Rail Converter
2 x Dovetail To Picatinny Weaver 37mm / 13 mm To 22mm Rail Converter This is 37mm - 13mm Dovetail to Picatinny Adaptors - a pair in a packet. Made from aluminium There are two ways of how you can use this product: Option 1: Take the side grab screws off, place the rail in your scope mount, then while you’re tightening your scope mount it will grab and hold your rifle’s Dovetail Rail.Option 2: Place the adaptor on your rifle rail, tight the side grab screws so the adaptor will stay on your rifle rail. You can secure the adaptor by grabbing screws from top for rifle with some recoil. Package includes: 37mm adaptors 2x allen key 4x top grab screws (2 different lengths) 2x spare side grab screws 2x spare ends grab screws Designed to work with all our Scope Mounts. It may work with other scope mounts as well, however we cannot guarantee this. Better than the cheap Ebay ones, has screws on the side to help secure. Images are generic and may show the 37 -11 model - they look the same.
£23.98
-
Eagle Vision Eagle Vision - 2 X Dovetail To Picatinny Weaver 50mm / 13 mm To 22mm Rail Converter
2 x Dovetail To Picatinny Weaver 50mm / 13 mm To 22mm Rail Converter This is 50mm - 13mm Dovetail to Picatinny Adaptors - a pair in a packet. Made from aluminium There are two ways of how you can use this product: Option 1: Take the side grab screws off, place the rail in your scope mount, then while you’re tightening your scope mount it will grab and hold your rifle’s Dovetail Rail.Option 2: Place the adaptor on your rifle rail, tight the side grab screws so the adaptor will stay on your rifle rail. You can secure the adaptor by grabbing screws from top for rifle with some recoil. Package includes: 50mm adaptors 2x allen key 4x top grab screws (2 different lengths) 2x spare side grab screws 2x spare ends grab screws Designed to work with all our Scope Mounts. It may work with other scope mounts as well, however we cannot guarantee this. Better than the cheap Ebay ones, has screws on the side to help secure. Images are generic and may show the 50 -11 model - they look the same.
£28.99
-
Eagle Vision Eagle Vision - 30mm Scope Ring Anti Can't Bubble Level Ring
Eagle Vision - 30mm Scope Ring Anti Can't Bubble Level Ring A long-range shot has many factors to take into consideration to be sure you are on target – the EVC/LEVEL anti-cant system aids in the correction of ‘cant error’, giving you dead-on true vertical hold, just before you pull the trigger.The suspended bubble level with reflective platform, allows maximum light refraction for enhanced fluid illumination and sight acquisition, in all outdoor and harsh conditions.It is an anti-cant device that helps you hold your scoped gun level, plumb, and squared with the world for enhanced accuracy at longer ranges. Functions: Helps in keeping your rifle perfectly vertical for accurate long range shooting.Fits 30mm scopes.Quick and easy installation.High visibility bubble levels.Solid, durable construction.x 6 different colour bubble levesl to choos from.x 2 side attachments with M4 holes for our angle indicator picatinny rail or our future accessories. Package includes: x 1 scope ring bubble level.x 6 different bubble level colours: clear, yellow, green, red blue and black.x 2 two different size allen keys.x 2 bubble level holder screws.x 1 spare ring screw. Features: Ring size: 30mmWeights: 22gMaterial: 6061 aluminium, black anodised. To install you will need to establish your scope / rifle in a level position first. Then match the bubble level ring to the setting you require.
£29.98
-
Eagle Vision Eagle Vision - 30mm to 25mm Tube Scope Ring Adaptor
30mm to 25mm Tube Ring Adaptor This is high quality 30mm to 25mm scope tube adaptor, made of aluminium. Designed To Works With Eagle Vision 30mm Scope Mounts. Bubble Gauge and mount NOT Included
£17.98
-
Eagle Vision Eagle Vision - 34mm Scope Ring Anti Can't Bubble Level Ring
Eagle Vision - 34mm Scope Ring Anti Can't Bubble Level Ring A long-range shot has many factors to take into consideration to be sure you are on target – the EVC/LEVEL anti-cant system aids in the correction of ‘cant error’, giving you dead-on true vertical hold, just before you pull the trigger.The suspended bubble level with reflective platform, allows maximum light refraction for enhanced fluid illumination and sight acquisition, in all outdoor and harsh conditions.It is an anti-cant device that helps you hold your scoped gun level, plumb, and squared with the world for enhanced accuracy at longer ranges. Functions: Helps in keeping your rifle perfectly vertical for accurate long range shooting.Fits 34mm scopes.Quick and easy installation.High visibility bubble levels.Solid, durable construction.x 6 different colour bubble levesl to choos from.x 2 side attachments with M4 holes for our angle indicator picatinny rail or our future accessories. Package includes: x 1 scope ring bubble level.x 6 different bubble level colours: clear, yellow, green, red blue and black.x 2 two different size allen keys.x 2 bubble level holder screws.x 1 spare ring screw. Features: Ring size: 34mmWeights: 22gMaterial: 6061 aluminium, black anodised. To install you will need to establish your scope / rifle in a level position first. Then match the bubble level ring to the setting you require.
£29.98
-
Eagle Vision Eagle Vision - AGT URAGAN 2, VULCAN 3, 1/2 X 20 UNF Moderator Adaptor
Eaglevision - AGT URAGAN 2, VULCAN 3, 1/2 X 20 UNF Moderator Adaptor This adaptor allows you to connect any standard 1/2 x 20 UNF moderator to your rifleshroud. This item comes with self tightening tools (no other tools required). Fits 177, 22, 25 and 30 caliber. Fits Following Rifles: URAGAN 2, (ALL THE MODELS ) VULCAN 3, ( ALL THE MODELS) More information Female side: Threads size & pitch: M14x1.25 male side: 1/2 UNF X 20 Outer diameter: 38mm Weight: 36grm This is a home install item and we provide no instruction on the fitting. It is an aftermarket fitting and installed entirely at the customers own risk. Airgun 101 Shop is not liable in any way for any damage to any item or harm to any person when using or installing this product.
£34.78
-
Eagle Vision Eagle Vision - AGT VIXEN 1/2 X 20 UNF Moderator Adaptor
Eaglevision - AGT VIXEN 1/2 X 20 UNF Moderator Adaptor This adaptor allows you to connect any standard 1/2 x 20 UNF moderator to your rifle shroud. VIXEN (ALL THE MODELS ) BE AWARE YOU WILL NEED TO MAKE 4 X HOLES IN THE BAFFEL / BAFFLE FROM YOUR RIFLE - WE ARE NOT RESPONSIBLE IF YOU MESS THIS UP. Please follow this guide, to ensure correct installation. 1. Unscrew and Extract the aluminium baffle. 2. Make a 4x 3mm hole with a 3mm drill bit in your baffle same locations as original holes. 3. Carefully line up the 1/2 x 20 UNF adaptor hole with your baffle, place the screws and tighten up with the supplied locking nuts. 4. Re–insert the baffle and tighten. This adaptor allows you to connect any standard 1/2 x 20 UNF moderator to your rifleshroud. This item comes with self tightening tools (no other tools required). Fits 177, 22, 25 and 30 caliber. The baffle / baffle is NOT included just to show how to install. Male side: 1/2 UNF X 20 Outer diameter: 51mm Weight: 40grm This is a home install item and we provide no instruction on the fitting. It is an aftermarket fitting and installed entirely at the customers own risk. Airgun 101 Shop is not liable in any way for any damage to any item or harm to any person when using or installing this product.
£39.50
-
Eagle Vision Eagle Vision - Air Max MKII, SMK, Artemis, PP700S-A - 1/2 UNF x 20 Moderator Adaptor
Eaglevision - Air Max MKII, SMK, Artemis, PP700S-A - 1/2 UNF x 20 Moderator Adaptor Fits - Air Max MKII, SMK, Artemis, PP700S-A Made of Aluminium Anodised Matt Black. Allows for the fitting of any standard female 1/2″ UNF silencer. This item comes with self tightening tools (no other tools required). More information Threads size & pitch: M8 x1 female Outer diameter: 20mm EAGLEVISION DOE NOT SUPPLY FITTING INSTRUCTIONS. This is a home install item and we provide no instruction on the fitting. It is an aftermarket fitting and installed entirely at the customers own risk. Airgun 101 Shop is not liable in any way for any damage to any item or harm to any person when using or installing this product.
£25.99
-
Eagle Vision Eagle Vision - AirgunTechnology URAGAN KING 1/2 UNF Adaptor
Eaglevision - AirgunTechnology URAGAN KING 1/2 UNF Adaptor Fits only to the baffle type like one in the added photo in the description. It does not work with baffles other than the one shown in the picture. This adaptor allows you to connect any standard 1/2 x 20 UNF moderator to your rifleshroud. This item comes with self tightening tools (no other tools required). Fits 177, 22, 25 and 30 caliber. More information Threads size & pitch: M48 x 1 male Outer diameter: 49.50mm EAGLEVISION DOE NOT SUPPLY FITTING INSTRUCTIONS. This is a home install item and we provide no instruction on the fitting. It is an aftermarket fitting and installed entirely at the customers own risk. Airgun 101 Shop is not liable in any way for any damage to any item or harm to any person when using or installing this product.
£41.95
-
Eagle Vision Eagle Vision - All in one – Muzzle Brake, Air Stripper & Harmonic Barrel Tuner MZHT-50B
Eaglevision - All in one – Muzzle Brake, Air Stripper & Harmonic Barrel Tuner MZHT-50B 1/2 UNF Fitting This Air Stripper and harmonic all in one tuner is designed to balance the rifle. Our new multi-caliber all on one Tuner system can be used in different air rifles with various calibers. The interchangeable caliber adaptor can easily be swapped for another adaptor, with the tools provided. There are no moving parts, all components are fully secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping. These products are manufactured by 5 Axis CNC tolerance of + or – 0.05 All our end adaptors can be used with future Eagle Vision sound moderators, muzzle brakes and some harmonic barrel tuner models. The caliber specific adaptor helps to increase accuracy; The front caliber adaptor with 8 holes, looks great and is designed so to allow insertion of the stainless steel bar tool, to tighten or loosen the adaptor. Caliber adaptors:.177, .22, .25 and .30 Product specifications: MZHT-50B Length: 90.3mm diameter: 35mm Weight: 303 grams End Thread: M23 X 1 Front Threads: M15X0.6 Inner tube made of aluminium anodised Black outer adjustable tube made from stainless steel silver its natural colour. Product includes: 1x all in one main body 2x O-rings 6x grab screws 1x Allen key 1x end adaptor 1/2 UNF x 20 Each one includes: 2x stainless steel tool bar 1x Allen key 1x waterproof Storage Case 4x piece of caliber specific adaptor .177, .22, .25 and .30 (included 8x stainless steel tool bars) Product specifications: Length: 15mm Front Outside diameter: 19mm 177 Weight: 15gr 22 Weight: 14gr 25 Weight: 13gr 30 Weight: 12gr Threads: M15X0.6 Once fitted / used / fired through this product is regarded as used.
£113.99
-
Eagle Vision Eagle Vision - All in one – Muzzle Brake, Air Stripper & Harmonic Barrel Tuner MZHT-50S
Eaglevision - All in one – Muzzle Brake, Air Stripper & Harmonic Barrel Tuner MZHT-50S 1/2 UNF Fitting This stainless steel Air Stripper and harmonic all in one tuner is designed to balance the rifle. Our new multi-caliber all on one Tuner system can be used in different air rifles with various calibers. The interchangeable caliber adaptor can easily be swapped for another adaptor, with the tools provided. There are no moving parts, all components are fully secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping. These products are manufactured by 5 Axis CNC tolerance of + or – 0.05 All our end adaptors can be used with future Eagle Vision sound moderators, muzzle brakes and some harmonic barrel tuner models. The caliber specific adaptor helps to increase accuracy; The front caliber adaptor with 8 holes, looks great and is designed so to allow insertion of the stainless steel bar tool, to tighten or loosen the adaptor. Caliber adaptors:.177, .22, .25 and .30 Product specifications: MZHT-50S Length: 90.3mm diameter: 35mm Weight: 303 grams End Thread: M23 X 1 Front Threads: M15X0.6 Inner tube made of aluminium anodised Black outer adjustable tube made from stainless steel silver its natural colour. Product includes: 1x all in one main body 2x O-rings 6x grab screws 1x Allen key 1x end adaptor 1/2 UNF x 20 Each one includes: 2x stainless steel tool bar 1x Allen key 1x waterproof Storage Case 4x piece of caliber specific adaptor .177, .22, .25 and .30 (included 8x stainless steel tool bars) Product specifications: Length: 15mm Front Outside diameter: 19mm 177 Weight: 15gr 22 Weight: 14gr 25 Weight: 13gr 30 Weight: 12gr Threads: M15X0.6 Once fitted / used / fired through this product is regarded as used.
£113.99
-
Eagle Vision Eagle Vision - All in one – Muzzle Brake, Air Stripper & Harmonic Barrel Tuner MZHT-60B
Eaglevision - All in one – Muzzle Brake, Air Stripper & Harmonic Barrel Tuner MZHT-60B 1/2 UNF Fitting This Air Stripper and harmonic all in one tuner is designed to balance the rifle. Our new multi-caliber all on one Tuner system can be used in different air rifles with various calibers. The interchangeable caliber adaptor can easily be swapped for another adaptor, with the tools provided. There are no moving parts, all components are fully secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping. These products are manufactured by 5 Axis CNC tolerance of + or – 0.05 All our end adaptors can be used with future Eagle Vision sound moderators, muzzle brakes and some harmonic barrel tuner models. The caliber specific adaptor helps to increase accuracy; The front caliber adaptor with 8 holes, looks great and is designed so to allow insertion of the stainless steel bar tool, to tighten or loosen the adaptor. Caliber adaptors:.177, .22, .25 and .30 Product specifications: MZHT-60B Length: 90.3mm diameter: 35mm Weight: 303 grams End Thread: M23 X 1 Front Threads: M15X0.6 Product includes: 1x all in one main body 2x O-rings 6x grab screws 1x Allen key 1x end adaptor 1/2 UNF x 20 Each one includes: 2x stainless steel tool bar 1x Allen key 1x waterproof Storage Case 4x piece of caliber specific adaptor .177, .22, .25 and .30 (included 8x stainless steel tool bars) Product specifications: Length: 15mm Front Outside diameter: 19mm 177 Weight: 15gr 22 Weight: 14gr 25 Weight: 13gr 30 Weight: 12gr Threads: M15X0.6 Once fitted / used / fired through this product is regarded as used.
£113.99
-
Eagle Vision Eagle Vision - All in one – Muzzle Brake, Air Stripper & Harmonic Barrel Tuner MZHT-60S
Eaglevision - All in one – Muzzle Brake, Air Stripper & Harmonic Barrel Tuner MZHT-60S 1/2 UNF Fitting This Air Stripper and harmonic all in one tuner is designed to balance the rifle. Our new multi-caliber all on one Tuner system can be used in different air rifles with various calibers. The interchangeable caliber adaptor can easily be swapped for another adaptor, with the tools provided. There are no moving parts, all components are fully secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping. These products are manufactured by 5 Axis CNC tolerance of + or – 0.05 All our end adaptors can be used with future Eagle Vision sound moderators, muzzle brakes and some harmonic barrel tuner models. The caliber specific adaptor helps to increase accuracy; The front caliber adaptor with 8 holes, looks great and is designed so to allow insertion of the stainless steel bar tool, to tighten or loosen the adaptor. Caliber adaptors:.177, .22, .25 and .30 Product specifications: MZHT-60S Length: 90.3mm diameter: 35mm Weight: 303 grams End Thread: M23 X 1 Front Threads: M15X0.6 Inner tube made of aluminium anodised Black outer adjustable tube made from stainless steel silver its natural colour. Product includes: 1x all in one main body 2x O-rings 6x grab screws 1x Allen key 1x end adaptor 1/2 UNF x 20 Each one includes: 2x stainless steel tool bar 1x Allen key 1x waterproof Storage Case 4x piece of caliber specific adaptor .177, .22, .25 and .30 (included 8x stainless steel tool bars) Product specifications: Length: 15mm Front Outside diameter: 19mm 177 Weight: 15gr 22 Weight: 14gr 25 Weight: 13gr 30 Weight: 12gr Threads: M15X0.6 Once fitted / used / fired through this product is regarded as used.
£113.99
-
Eagle Vision Eagle Vision - Compact MOA Fully Adjustable Picatinny Riser Block - Single
Eagle Vision - Compact MOA Fully Adjustable Picatinny Riser Block - Single Ideal to help attach torches and accessories. These are sold as a single item, if you need two - then order two A single mount can be used as a fully adjustable accessory for torch/laser or… a pair can be used for elevation purposes only or to raise the scope (Picatinny to Picatinny) If you try and be clever and deform or twist your mounts or scope thats your issue. We have designed and developed new adjustable Picatinny, Torch, Laser, Accessories Mount.We are very proud of this product as it resolves some issues for shooters, who depend on reliability of a solid mount. Main benefits of this mount: 1. Adjustability:This mount is fully adjustable (forwards and backwards), can be elevated and height-adjusted, which allows the accessories to move vertically and horizontally along a guided path. It can be lockable in different positions, using one screw on the side of this mount. 2. Longer Range Shooting:A pair of this mount can be installed under any Picatinny scope mount, while elevation or height adjustments can be done for long range before running out of adjustment on the turrets.This ability is mainly for users who aim to reach further but are restricted by their current mounting system.By keeping the front mount at its lowest and elevating the rear mount to the highest point, you can zero in your gun far beyond, without using the clicks on your turrets, hence keeping the optical centre of your scope intact. By using a single one windage/elevation can be fully adjusted. By using a pair only elevation can be adjusted. Product includes: 1x Infinity Picatinny torch mount 3x Allen keys (3 different sizes) 1x Side screw 2x m5 spring screws 2x m4 locking screws More information:Weight: 54 grams Torque calculation:Adjustable side screws maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.Picatinny nuts maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters. Bubble Gauge NOT Included Do not remove the elevation screws unless the mount is fully raised / in the high / open elevation position or you will damage the mount.
£33.49
-
Eagle Vision Eagle Vision - Cylinder Pressure Test and Dust Plug Connector Foster Fitting
Eaglevision - Cylinder Pressure Test and Dust Plug Connector Foster Fitting A must have to protect your air line from your pump or bottle. Foster fitting, plug it in to protect from dust. Has a little hole for you to put a bit of string through so you can attach it to something and not lose it. Can also be used as a pressure test to find out how much air you have left in your dive bottle / tank. This is working with high pressure air - be safe - we are not responsible if you hurt yourself, any belonging or anyone else.
£5.98
-
Eagle Vision Eagle Vision - Dovetail To Picatinny Weaver 100mm / 11 mm To 22mm Rail Converter
Dovetail To Picatinny Weaver 100mm 11 mm To 22mm Rail Converter This Adaptor allows you to convert your Dovetail rail to Picatinny with less modifications and low profile. After tightening a few screws on the side, the rail will stay tight and secure on the place. 100mm Long 11mm Dovetail to 22mm Picatinny Pack contains 100mm adapter 2x allen key 4x top grab screws (2 different lengths) 2x spare side grab screws 2x spare ends grab screws Better than the cheap Ebay ones, has screws on the side to help secure.
£18.98
-
Eagle Vision Eagle Vision - Dovetail To Picatinny Weaver 100mm / 13 mm To 22mm Rail Converter
Dovetail To Picatinny Weaver 100mm / 13 mm To 22mm Rail Converter This is 100mm - 13mm Dovetail to Picatinny Adaptors Made from aluminium There are two ways of how you can use this product: Option 1: Take the side grab screws off, place the rail in your scope mount, then while you’re tightening your scope mount it will grab and hold your rifle’s Dovetail Rail.Option 2: Place the adaptor on your rifle rail, tight the side grab screws so the adaptor will stay on your rifle rail. You can secure the adaptor by grabbing screws from top for rifle with some recoil. Package includes: 100mm adapter 2x allen key 4x top grab screws (2 different lengths) 2x spare side grab screws 2x spare ends grab screws Designed to work with all Eaglevision Scope Mounts. It may work with other scope mounts as well, however we cannot guarantee this. Better than the cheap Ebay ones, has screws on the side to help secure.
£18.98
-
Eagle Vision Eagle Vision - Dovetail To Picatinny Weaver 120mm / 11 mm To 22mm Rail Converter
Dovetail To Picatinny Weaver 120mm 11 mm To 22mm Rail Converter This Adaptor allows you to convert your Dovetail rail to Picatinny with less modifications and low profile. After tightening a few screws on the side, the rail will stay tight and secure on the place. 120mm Long 11mm Dovetail to 22mm Picatinny Pack contains 120mm adapter 2x allen key 4x top grab screws (2 different lengths) 2x spare side grab screws 2x spare ends grab screws Better than the cheap Ebay ones, has screws on the side to help secure.
£22.49
-
Eagle Vision Eagle Vision - Dovetail To Picatinny Weaver 120mm / 13 mm To 22mm Rail Converter
Dovetail To Picatinny Weaver 120mm / 13 mm To 22mm Rail Converter This is 120mm - 13mm Dovetail to Picatinny Adaptors Made from aluminium There are two ways of how you can use this product: Option 1: Take the side grab screws off, place the rail in your scope mount, then while you’re tightening your scope mount it will grab and hold your rifle’s Dovetail Rail.Option 2: Place the adaptor on your rifle rail, tight the side grab screws so the adaptor will stay on your rifle rail. You can secure the adaptor by grabbing screws from top for rifle with some recoil. Package includes: 120mm adapter 2x allen key 4x top grab screws (2 different lengths) 2x spare side grab screws 2x spare ends grab screws Designed to work with all Eaglevision Scope Mounts. It may work with other scope mounts as well, however we cannot guarantee this. Better than the cheap Ebay ones, has screws on the side to help secure.
£19.49
-
Eagle Vision Eagle Vision - Dovetail To Picatinny Weaver 150mm / 11 mm To 22mm Rail Converter
Dovetail To Picatinny Weaver 150mm 11 mm To 22mm Rail Converter This Adaptor allows you to convert your Dovetail rail to Picatinny with less modifications and low profile. After tightening a few screws on the side, the rail will stay tight and secure on the place. 150mm Long 11mm Dovetail to 22mm Picatinny Pack contains 1 rail. Better than the cheap Ebay ones, has screws on the side to help secure.
£24.99
-
Eagle Vision Eagle Vision - Dovetail To Picatinny Weaver 150mm / 13 mm To 22mm Rail Converter
Dovetail To Picatinny Weaver 150mm 13 mm To 22mm Rail Converter This Adaptor allows you to convert your Dovetail rail to Picatinny with less modifications and low profile. After tightening a few screws on the side, the rail will stay tight and secure on the place. 150mm Long 13mm Dovetail to 22mm Picatinny Pack contains 1 rail. Better than the cheap Ebay ones, has screws on the side to help secure.
£28.99
-
Eagle Vision Eagle Vision - Dovetail To Picatinny Weaver 170mm / 11 mm To 22mm Rail Converter
Dovetail To Picatinny Weaver 170mm 11 mm To 22mm Rail Converter This Adaptor allows you to convert your Dovetail rail to Picatinny with less modifications and low profile. After tightening a few screws on the side, the rail will stay tight and secure on the place. 170mm Long 11mm Dovetail to 22mm Picatinny Pack contains 170mm adapter 2x allen key 4x top grab screws (2 different lengths) 2x spare side grab screws 2x spare ends grab screws Better than the cheap Ebay ones, has screws on the side to help secure.
£28.49
-
Eagle Vision Eagle Vision - Dovetail To Picatinny Weaver 170mm / 13 mm To 22mm Rail Converter
Dovetail To Picatinny Weaver 170mm 13 mm To 22mm Rail Converter This is a 170mm - 13mm Dovetail to Picatinny Adaptor. Made from aluminium There are two ways of how you can use this product: Option 1: Take the side grab screws off, place the rail in your scope mount, then while you’re tightening your scope mount it will grab and hold your rifle’s Dovetail Rail.Option 2: Place the adaptor on your rifle rail, tight the side grab screws so the adaptor will stay on your rifle rail. You can secure the adaptor by grabbing screws from top for rifle with some recoil. Package includes: 170mm adapter 2x allen key 4x top grab screws (2 different lengths) 2x spare side grab screws 2x spare ends grab screws Designed to work with all our Scope Mounts. It may work with other scope mounts as well, however we cannot guarantee this. Better than the cheap Ebay ones, has screws on the side to help secure.
£28.49
-
Eagle Vision Eagle Vision - Dovetail To Picatinny Weaver 200mm / 11 mm To 22mm Rail Converter
Dovetail To Picatinny Weaver 200mm 11 mm To 22mm Rail Converter This Adaptor allows you to convert your Dovetail rail to Picatinny with less modifications and low profile. After tightening a few screws on the side, the rail will stay tight and secure on the place. 200mm Long 11mm Dovetail to 22mm Picatinny Pack contains 200mm adapter 2x allen key 4x top grab screws (2 different lengths) 2x spare side grab screws 2x spare ends grab screws Better than the cheap Ebay ones, has screws on the side to help secure.
£34.95
-
Eagle Vision Eagle Vision - Dovetail To Picatinny Weaver 200mm / 13 mm To 22mm Rail Converter
Dovetail To Picatinny Weaver 200mm 13 mm To 22mm Rail Converter This is a 200mm - 13mm Dovetail to Picatinny Adaptor. Made from aluminium There are two ways of how you can use this product: Option 1: Take the side grab screws off, place the rail in your scope mount, then while you’re tightening your scope mount it will grab and hold your rifle’s Dovetail Rail.Option 2: Place the adaptor on your rifle rail, tight the side grab screws so the adaptor will stay on your rifle rail. You can secure the adaptor by grabbing screws from top for rifle with some recoil. Package includes: 200mm adapter 2x allen key 4x top grab screws (2 different lengths) 2x spare side grab screws 2x spare ends grab screws Designed to work with all our Scope Mounts. It may work with other scope mounts as well, however we cannot guarantee this. Better than the cheap Ebay ones, has screws on the side to help secure.
£34.95
-
Eagle Vision Eagle Vision - EDgun Magazine Aluminium MK2. .177 + 4 Extra O-rings
EDgun Magazine Aluminium MK2. .177 + 4 Extra O-rings CNC Machined Aluminium Magazine Each magazine comes with 4 extra O-rings. Fits to: Edgun R3M Edgun R5 all the models Edgun Lelya 2.0 We’ve added some improvements such as: Easier to load Holds pellets more secure Smoother rotation Centre ball bearing makes a positive connection Numbered magazine shot count
£25.20
-
Eagle Vision Eagle Vision - EVG-11 AR Style Grip - FX Impact MK1 - Daystate Delta Wolf
Eagle Vision - EVG-11 AR Style Grip - FX Impact MK1 - Daystate Delta Wolf The AR-15 style grip is Made by CNC machined from a solid 6061-T6 billet aluminium. Compatible With FX Impact MK1 - NOT MK2 or MK3 Daystate Delta Wolf Specification: Weight 185gm 6061 Aluminum Anodized BLACK 3X M4 threads hole on each side for Thumb Rest included: 1x AR GRIP 1X Long Alen key 5mm 1X Waterproof case
£83.98
-
Eagle Vision Eagle Vision - EVG-13 AR Style Grip - FX Impact MK1 - Daystate Delta Wolf
Eagle Vision - EVG-13 AR Style Grip - FX Impact MK1 - Daystate Delta Wolf The AR-15 style grip is Made by CNC machined from a solid 6061-T6 billet aluminium. Compatible With FX Impact MK1 - NOT MK2 or MK3 Daystate Delta Wolf Specification: Weight 185gm 6061 Aluminum Anodized BLACK 3X M4 threads hole on each side for Thumb Rest included: 1x AR GRIP 1X Long Alen key 5mm 1X Waterproof case
£83.98
-
Eagle Vision Eagle Vision - EVG-14 AR Style Grip - FX & Edgun Leshiy 2
Eagle Vision - EVG-14 AR Style Grip - FX & Edgun Leshiy 2 The AR-15 style grip is Made by CNC machined from a solid 6061-T6 billet aluminium. Compatible With: Edgun Leshiy 2 FX Impact MK2 MK3 FX PANTHERA FX PANTHERA HUNTER FX Dreamline FX DYNAMIC FX Maverick Specification: Weight 128gm 6061 Aluminum Anodized BLACK 3X M4 threads hole on each side for Thumb Rest included: 1x AR GRIP 1X Long Alen key 5mm 1X Waterproof case Not supplied with the grip screw.
£71.98
-
Eagle Vision Eagle Vision - EVG-15 AR Style Grip - FX Impact MK1 - Daystate Delta Wolf
Eagle Vision - EVG-15 AR Style Grip - FX Impact MK1 - Daystate Delta Wolf The AR-15 style grip is Made by CNC machined from a solid 6061-T6 billet aluminium. Compatible With FX Impact MK1 - NOT MK2 or MK3 Daystate Delta Wolf Specification: Weight 138gm 6061 Aluminum Anodized BLACK 3X M4 threads hole on each side for Thumb Rest included: 1x AR GRIP 1X Long Alen key 5mm 1X Waterproof case Not supplied with the grip screw.
£83.98
-
Eagle Vision Eagle Vision - Forward Infinity Elevation Adjustable Scope Mount Picatinny 30mm
Eagle Vision Forward Infinity Elevation Adjustable Scope Mount Picatinny 30mm This well-designed scope mount allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. The mount can be used as low profile or adjusted to the high profile too if your scope objective its too close to your rifle barrel or shroud. This practical patent helps shooters who enjoy long-range shooting and often run out of adjustment clicks on their turrets. The mount can also come handy if you have not been able to use your favorite scope due to lack of space between the rings or unusual position of your dovetail or picatinny rail on your gun. We are very proud of this product as it has been becoming a “must have” solution among people who love their bullpups. The design of the mount is dedicated to people who want to improve their performance contrasting with what ordinary mounts allow to do. By keeping the front mount at its lowest and elevating the rear mount to the highest point, you can zero in your gun far beyond what standard mounts allow you to do, without using the clicks on your turrets, hence keeping the optical centre of your scope intact (ideal situation for long range shooting). Exceptionally well presented in the case and finished to a very high quality. Details: Height: 65 mm to 69.5 mm (adjustable) Profil height: 21 mm Adjustable height: 4.5 mm Weight: 92 gm each one Centre of the ring to the bottom of the rail: 38 mm in closed position Centre of the ring to the bottom of the rail: 42.5 mm in open position Ring size: 30 mm In the box 2 x infinity scope mounts 2 x allen key set – different sizes 2 x small spear screws 2 x large spear screws 1 x waterproof case Bubble Gauge NOT Included Do not remove the elevation screws unless the mount is fully raised / in the high / open elevation position or you will damage the mount.
£97.99 £94.99
-
Eagle Vision Eagle Vision - Fully Adjustable Picatinny Torch, Laser, Mount
Eagle Vision Fully Adjustable Picatinny Torch, Laser, Mount 1 per Pack This is the Micro Version of the fully adjustable windage and elevation mount, ideal for adding accessories and making them fully adjustable with ease. We are very proud of this product as it’s development resolves some issues for shooters, who depend on the reliability of a solid mount. Main benefits of using this mount: 1. Adjustability:FULLY ADJUSTABLE, FORWARD or BACKWARD , ELEVATION, WINDAGE, HEIGHT ADJUSTMENT, that allows the Accessoris to move vertically and horizontally along a guided path, and lockable in different positions, using 2x screws on the side of this mount. 2. Longer range shooting:Pair of this mounts can be instal under any Picatinny scope mount and do elevation or hight adjustments for long range before running out of adjustment on the turretsis the ability for users who need to reach out further but are restricted by their current mounting system.By keeping the front mount at it’s lowest and elevating the rear mount to the highest point you can zero in your gun far beyond, without using the clicks on your turrets, hence keeping the optical centre of your scope intact. 3.Using Single can fully adjustable Windage/elevation, using pair can be only elevating Technical information for the new mount: Length: 60mmProfile height from bottom of the mount to middle of the top picatinny rail, 21mm.Total height: 30.30mmAdjustable Height: 4.5mmWeight: 81 grams Product includes: 1x Infinity picatinny Torch mount3 x Allen keys, (two different sizes)3 x side screws2 x m5 spring screw Torque calculation:Adjustable side screws maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.Picatinny nuts maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.
£53.98
-
Eagle Vision Eagle Vision - FX Wildcat Magazine .177 MK1 + MK2 - Eaglevision Design
FX Wildcat Magazine .177 MK1 + MK2 - Eaglevision Design FX Wildcat aluminium magazine Designed and manufactured by Eagle Vision.Each magazine comes with 4 extra O-rings. Easier to load Holds pellets more secure Smoother rotation Centre ball bearing makes a positive connection Easier to change the O-rings Numbered magazine shot count
£25.20
-
Eagle Vision Eagle Vision - Infinity Elevation Adjustable Scope Mount 30mm Ring Picatinny INS-30
Eagle Vision Infinity Elevation Adjustable Scope Mount 30mm Ring Picatinny INS-30 Eagle Vision have designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This well-designed scope mount allows vertical movement along a guided path, and can be adjusted for low profile, and also for high profile settings. The INFINITY mounts are also lockable in different positions using two screws. INFINITY mounts are ideal for long range shooting and are extensively used for larger objective scopes, increasing space between your scope, barrel or shroud and enabling you to zero in your gun far beyond standard mounts. The design of the mount keeps the front mount lower and elevates the rear mount to a higher position. This in turn, is helpful for long-range shooters who find standard scope mount clicks on their turrets self running and unadjusted. Exceptionally well presented in the case and finished to a very high quality. Details: Hight: 60.7mm to 65.7mm (adjustable) Profile Hight: 21mm Adjustable Height: 4.5mm. Weight: 86g each one. Centre of the ring to the bottom of the rail: 36mm (in closed position). Centre of the ring to the bottom of the rail: 40.5mm (in open position). Ring size: 30mm Rail size: 20mm picatinny 2 x Alan Keys Included 4 x Small spare screws 1 x Large spare screw Protection Fabric Waterproof Case Bubble Gauge NOT Included Do not remove the elevation screws unless the mount is fully raised / in the high / open elevation position or you will damage the mount.
£99.99 £83.98
-
Eagle Vision Eagle Vision - Infinity Elevation Adjustable Scope Mount 34mm Ring Picatinny INS-34
Eagle Vision Infinity Elevation Adjustable Scope Mount 34mm Ring Picatinny INS-34 Special Offer SALE Eagle Vision have designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This well-designed scope mount allows vertical movement along a guided path, and can be adjusted for low profile, and also for high profile settings. The INFINITY mounts are also lockable in different positions using two screws. INFINITY mounts are ideal for long range shooting and are extensively used for larger objective scopes, increasing space between your scope, barrel or shroud and enabling you to zero in your gun far beyond standard mounts. The design of the mount keeps the front mount lower and elevates the rear mount to a higher position. This in turn, is helpful for long-range shooters who find standard scope mount clicks on their turrets self running and unadjusted. Exceptionally well presented in the case and finished to a very high quality. Details: Height - 65mm to 69.5mm ( adjustable ) Profile Height - 21mm Adjustable Height - 4.5mm Weight - 92g each Centre of the ring to the bottom of the rail - 38mm in closed postion Centre of the ring to the bottom of the rail - 42.4mm in open postion Ring Size 34mm Rail size - 20mm Picatinny 2 x Alan Keys Included 4 x Small spare screws 1 x Large spare screw Protection Fabric Waterproof Case Bubble Gauge NOT Included Do not remove the elevation screws unless the mount is fully raised / in the high / open elevation position or you will damage the mount.
£99.99 £83.98
-
Eagle Vision Eagle Vision - Infinity Elevation Adjustable Scope Mount 34mm Ring Picatinny IPS-34
Eagle Vision Infinity Elevation Adjustable Scope Mount 34mm Ring Picatinny IPS-34 Special Offer SALE Eagle Vision have designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This well-designed scope mount allows vertical movement along a guided path, and can be adjusted for low profile, and also for high profile settings. The INFINITY mounts are also lockable in different positions using two screws. INFINITY mounts are ideal for long range shooting and are extensively used for larger objective scopes, increasing space between your scope, barrel or shroud and enabling you to zero in your gun far beyond standard mounts. The design of the mount keeps the front mount lower and elevates the rear mount to a higher position. This in turn, is helpful for long-range shooters who find standard scope mount clicks on their turrets self running and unadjusted. Exceptionally well presented in the case and finished to a very high quality. Details: Height - 65mm to 69.5mm ( adjustable ) Profile Height - 21mm Adjustable Height - 4.5mm Weight - 92g each Centre of the ring to the bottom of the rail - 38mm in closed postion Centre of the ring to the bottom of the rail - 42.4mm in open postion Ring Size 34mm Rail size - 20mm Picatinny 2 x Alan Keys Included 4 x Small spare screws 1 x Large spare screw Protection Fabric Waterproof Case Bubble Gauge NOT Included Do not remove the elevation screws unless the mount is fully raised / in the high / open elevation position or you will damage the mount.
£99.99 £83.98
-
Eagle Vision Eagle Vision - Infinity Elevation Ajustable Scope Mount 30mm Ring Picatinny IPS-30
Eagle Vision Infinity Elevation Ajustable Scope Mount 30mm Ring Picatinny IPS-30 This well-designed scope mount allows vertical movement along a guided path, and can be adjusted for low profile, and also for high profile settings. The INFINITY mounts are also lockable in different positions using two screws. INFINITY mounts are ideal for long range shooting and are extensively used for larger objective scopes, increasing space between your scope, barrel or shroud and enabling you to zero in your gun far beyond standard mounts. The design of the mount keeps the front mount lower and elevates the rear mount to a higher position. This in turn, is helpful for long-range shooters who find standard scope mount clicks on their turrets self running and unadjusted. Exceptionally well presented in the case and finished to a very high quality. Details: Height: 68.25 mm to 77.75 mm (adjustable) Profile Height: 23 mm Adjustable Height: 9.5 mm Weight: 81 g each Centre of the ring to the bottom of the rail: 41 mm (in closed position) Centre of the ring to the bottom of the rail: 51.5 mm (in open position) Ring size: 30 mm Rail size: 22 mm picatinny 2 x Alan Keys included Does not include bubble level accessory Do not remove the elevation screws unless the mount is fully raised / in the high / open elevation position or you will damage the mount.
£99.99 £83.98
-
Eagle Vision Eagle Vision - Infinity Forward Elevation Adjustable Picatinny Scope Mount 30mm
Infinity Forward Elevation Adjustable Picatinny Scope Mount 30mm Want a mount that moves forward to give more eye relief and elevation all in one. This may be what your looking for. Give yourself that extra reach at long range - adding this mount gives more elevation to your scope and allows your favourite optic to add on rear mounted items without having to fully re-zero. Height: 68.25mm to 77.75 mm adjustable. Profile Height: 23 mm Adjustable Height: 9.5mm. Weight: 81 g each. Centre of the ring to the bottom of the rail: 41mm (in closed position). Centre of the ring to the bottom of the rail: 51.5mm (in open position). Ring size: 30mm Rail size: 20mm Picatinny Picatinny Mounting ( purchase optional extra Pic to Dovetail adapter ) Bubble Mount included -will be a random colour.
£149.99 £119.99
-
Eagle Vision Eagle Vision - Kalibrgun Argus 1/2 x 20 UNF Sound Moderator Adapter
Eaglevision - Kalibrgun Argus 1/2 x 20 UNF Sound Moderator Adapter Fits: Kalibrgun Argus This Adapter allows to connect any standard 1/2 x 20 UNF Moderator to your rifle shroud Comes with self-tightening tools (no other tools required) Fits: 177, 22, 25 and 30 calibers Specifications: Made of aluminium with black anodising Outer diameter: 30mm EAGLEVISION DOE NOT SUPPLY FITTING INSTRUCTIONS. This is a home install item and we provide no instruction on the fitting. It is an aftermarket fitting and installed entirely at the customers own risk. Airgun 101 Shop is not liable in any way for any damage to any item or harm to any person when using or installing this product.
£35.95
-
Eagle Vision Eagle Vision - M4 Bubble Level - Eagle Vision
M4 Bubble Level - Eagle Vision Screws into the side of the Eagle Vision Mounts. One per Pack - Choose a Colour. Only Tested on Eagle Vision - will not fit other mounts mount and other accessories NOT Included
£14.38
-
Eagle Vision Eagle Vision - MZB - 40 Muzzle Brake / Air Stripper with Interchangeable caliber
Eagle Vision MZB-40 Muzzle Brake / Air Stripper with Interchangeable caliber 1/2 UNF Our new multi-caliber muzzle brake system can be used in different air rifles with various calibers.The interchangeable caliber adaptor can easily be swapped for another adaptor, with the tools provided. Interchangeable end adaptor to 1/2 UNF INCLUDED SHIPS WITH 1/2 UNF ADAPTER X 20, M14X1.25, M18X1, M20X1 OPTION - NOT INCLUDED There are no moving parts, all components are fully secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping.These products are manufactured by 5 Axis CNC tolerance of + or – 0.05 All our end adaptors can be used with future Eagle Vision sound moderators, muzzle brakes and harmonic barrel tuner models. The caliber specific adaptor helps to increase accuracy; The holes release air pressure from the sides helping to reduce the recoil. The front caliber adaptor with 8 holes, looks great and is designed so to allow insertion of the stainless steel bar tool, to tighten or loosen the adaptor. Caliber adaptors:.177, .22, .25 and .30 Some home assembly of muzzle break is required. SPECIFICATIONS MZB-40 Length: 55mm diameter: 40mm Weight: 82 grams End Thread: M23 X 1 Front Threads: M15X0.6 Product includes: 1x Muzzle Brake 4x O- rings 6x screws 1x Allen key 1x end adaptor of 1/2 UNF is included 2x stainless steel tool bar 1x Allen key 1x waterproof Storage Case 4x piece if caliber specific adaptor .177, .22, .25 and .30 (included 8x stainless steel tool bars)
£72.00
-
Eagle Vision Eagle Vision - MZB-32 Muzzle Brake / Air Stripper with Interchangeable caliber
Eagle Vision MZB-32 Muzzle Brake / Air Stripper with Interchangeable caliber 1/2 UNF Our new multi-caliber muzzle brake system can be used in different air rifles with various calibers.The interchangeable caliber adaptor can easily be swapped for another adaptor, with the tools provided. Interchangeable end adaptor to 1/2 UNF INCLUDED SHIPS WITH 1/2 UNF ADAPTER X 20, M14X1.25, M18X1, M20X1 OPTION - NOT INCLUDED There are no moving parts, all components are fully secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping.These products are manufactured by 5 Axis CNC tolerance of + or – 0.05 All our end adaptors can be used with future Eagle Vision sound moderators, muzzle brakes and harmonic barrel tuner models. The caliber specific adaptor helps to increase accuracy; The holes release air pressure from the sides helping to reduce the recoil. The front caliber adaptor with 8 holes, looks great and is designed so to allow insertion of the stainless steel bar tool, to tighten or loosen the adaptor. Caliber adaptors:.177, .22, .25 and .30 Some home assembly of muzzle break is required. SPECIFICATIONS MZB-32 Length: 55mm diameter: 32mm Weight: 40 grams End Thread: M23 X 1 Front Threads: M15X0.6 Product includes: 1x Muzzle Brake 4x O- rings 6x screws 1x Allen key 1x end adaptor of 1/2 UNF is included 2x stainless steel tool bar 1x Allen key 1x waterproof Storage Case 4x piece if caliber specific adaptor .177, .22, .25 and .30 (included 8x stainless steel tool bars)
£72.00
You have seen 240 out of 1018 products