Walther Competition III Green Dot Sight - Weaver Rail The Competition III Sight by Walther is a green dot sight designed for competition. It has a green dot illumination and a coated lens, and includes an integrated mount for a picatinny / weaver rail. It sports a slim design which permits low line of sight and a 10 MOA green dot. The sight comes in at 86mm and has dual brightness settings. Green dot sight Two brightness levels 10 MOA Parallax adjustable up to 25m Dimensions : 86 × 27 × 30mm Weight : 58g Requires 1 x CR2032 battery included. 

Read more less

Primary Arms SLX Series MD-RB-AD The Microdot, Removable Base, Advanced sight (MD-RB-AD) takes everything we learned from our best selling MD-ADS microdot and refines it a step further. MD-RB-AD features an estimated 50,000 hours of battery life from the included CR2032 battery, powering an ultra-sharp 2 MOA dot. Fully multicoated lenses and an ultra-low profile emitter ensure a clean sight picture with minimal lens tint. Eleven brightness settings are controlled by the rotary knob on the right side. The first two settings are compatible with night vision units and cannot be seen by the naked eye. The brightest settings are daylight bright. The illumination knob physically stops at 0 with the red dot turned off. Covered by the Primary Arms lifetime warranty, MD-RB-AD is designed for use on heavy recoiling firearms such as shotguns. Constructed of 6061 aluminum throughout, MD-RB-AD features a Type II anodized matte black finish. Waterproofing is improved over previous models - for example, the turret caps are now aluminum instead of plastic and tighten down around the waterproofing O-rings until metal-to-metal contact with the scope body. When removed, the turret caps can be used to adjust windage and elevation. MD-RB-AD comes with a removable MIL-STD-1913 Picatinny base. With the base removed, the scope body is compatible with industry standard micro mount systems, enabling MD-RB-AD to be mounted correctly on a wide variety of firearms. This is a small Red Dot Scope. Weight 5.4 Ounces with battery Length 2.54 in Night Vision Compatible - NOT A NIGHT VISION SIGHT - allows an add on to see the dot. Fits Picatinny Standard. Eyepiece approx 2 cm width

Read more less

Nikko Stirling 50mm Red Dot 5/8 Rail Mounts ( Pic Mount )  Features• Weight: 7 oz. / 198g• Lens diameter: 1.7 inches / 42mm• Length: 3.8 inches / 97mm• Finish: matte black (silver finish available)• Dot size: 5 m.o.a.• Built in mounts for 7/8 or 3/8 inch bases

Read more less

Red Dot Magnifier 3x Base Optics The BASE Optics 3x Magnifier is a fast, simple and cost effective way of extending the capabilities of your Red Dot Sight. The BASE Optics 3x Magnifier simply attaches to your Weaver/Picatinny rail with its flip to the side mount and it allows the shooter to quickly flip the magnifier infront of their red dot sight to increase the magnfication of the unit and allow them to accurately engage targets at longer range.. The included flip to the side mount is designed to be used with an AR based rifle giving the user the correct mounting height to perfectly pair with their Red Dot Sight. The BASE Optics 3x Magnifier will work with any red dot as long as the mounting heights align. We do however reccomend that these are not used with prism scopes are the combination will not work. Magnification : 3X Eye Relief At 5° : FOV 40 90 mm At full FOV 60 65 mm Field OF View (@100yds) 7° Optical Coating : Mgf2 blue Finish : Anodized aluminum, Dark grey, Rubber coated Mounting : 30mm maintube (Mount included) Picatinny Rail  Dimensions : Length : 110 mm (4.3in)    Width/Height : 43x43 mm    Ring Width : 30 mm Ring Diameter : 30mm Weight : 400g In The Box 3x Magnfication Includes Flip to the side mount Includes flip ups Perfect and cost effective way of increasing your red dots capabilities at range

Read more less