DonnyFL Fat Boy 2.0 Silencer - .177 - .22 Calibre 1/2x20 UNF THIS DOES NOT SHIP WITH THE .25 - .30 STRIPPER - see below. The return of the beloved Fatboy! In the 2.0 version, we gave this Campbell soup can a face lift. New outer shell design along with interchangeable calibers from .177 to .22. Shooters who wanted something short yet effective, the fatboy will surprise you. Features: Compatible with .177 to .22 calibers - we DO NOT Include the .25 - .30 adapter. Strippers included .177 - .22 / .22 - .25  Includes 2 interchangeable air strippers Redesigned 1/2 x 20 rear cap for easy gripping Can be used with our 6.25 inch extender for more hush power Measure 4.25 inches long by 2 inches in diameter Weighs only 6.7 oz  This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. If your require the .25 - .30 Stripper contact us for production of FAC We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.

Read more less

DonnyFL - Quick Disconnect (QD) Rear Caps and Adapter for Old Moderators If you own a Sumo, Tatsu, Ronin, Shogun, Tanto, Emperor or FX DonnyFl moderator and want to convert it to a QD. This conversion kit will allow you to do so. Compatibility: Will not work on old moderators with the flat front cap. Features: Indexed so it locks on at same position every time Made of 7075 aluminum Grey anodized Includes barrel/shroud adapter and rear cap Select the barrel thread specific to your airgun Sizes Available - you need to select one, it's one size adapter per order. Sumo/Tatsu/Shogun - 1/2 x 20 M71 Tanto/KOI 1/2 x 20 M73 Ronin/Emperor/Fatboy2.0 1/2 x 20 M72 Ronin/Emperor/Fatboy2.0 M18x1 M86 FX DonnyFL 1/2 x 20 M74 FX DonnyFL M18x1 M87  QD Thread Adapters ONLY  QD Thread Adapter Only  M18x1 M76 QD Thread Adapter Only M20x1 M77 QD Thread Adapter Only 1/2Unf M78 This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings.

Read more less

Reximex - Silent Force Sound Moderator .177 .22 Short 1” DIAMETER - 5" Length Approx The Reximex Silent force moderator is a slim and small budget moderator, for the shooter who wants to dampen the shot noise without breaking the bank. Narrow moderators are never as sound dampening as wider, so this is a trade off between value and size. The Moderator is for 1/2 Inch UNF and is designed for .177 and .22 airguns.  To be clear if you have a free floating barrel on the rifle and it does not align correctly you may get clipping, which we are not responsible - it's your barrel not the moderator.   Key Features Broad Compatibility: Compatible with .177 .22 airguns NOT designed to be disassembled. This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.

Read more less

DonnyFL - RYU Quick Release 22 Silencer - .22 Calibre 1/2x20Unf 1.2” DIAMETER Introducing DonnyFLs Quick Disconnect moderators. These precision-engineered moderators feature a quick detach system, ensuring consistent shooting performance with no point-of-impact changes after detaching and re-attaching. These moderators are caliber specific compared to previous versions. Crafted from high-grade aluminium, theyre robust and modular to adapt to your shooting needs. Donny recommends if you are using a rifle with a shrouded barrel or a floating barrel or a barrel that does not connect directly to the end of the barrel housing - then go up a size / caliber - just like other Donny Mods. This can help avoid clipping in some possible circumstances - happens with any mod on a floating barrel - its a top tip. Main Features Indexed locking system for consistent position and no point of impact changes. Quick detachment for easy storage and reattachment for shooting. Comes with a 1/2 x 20 female (barrel/shroud) thread adapter. Modular design for length adjustment. Crafted from 6061 T6 aluminium (individual sections) and 7075 aluminium (main QD housing and adapter).   This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.

Read more less

DonnyFL FX Airgun Pro Size 22-25 Silencer - .177 - .22 Calibre 1/2x20UNF This is a custom size that comes with your FX airguns if you decide to upgrade the suppressor. Same length as the Tanto but slightly larger in diameter, comparable to the FX factory suppressor. This weights around 4.7 ounces. Comes with protective red tube for easy transport and storage. Built in collaboration with FX Airguns the airgun pro silencer offers maximum performance in a compact package. Available in .22-25 & .25-30 Precision cncd Approx weight 4.5 oz Mono-core design to increase accuracy and limit the chances of pellet clipping Sand blasted and anodized for maximum durability Comes pre-wrapped in felt Customizable - you can further dampen the sound Take apart in less than 10 seconds 1.36 x 5 inches As Donny FL moderators screw onto the shroud of your FX Airgun, DonnyFL would recommend going a size up when choosing your moderator. For example, if youre looking for a .177 DonnyFL would recommend using a .22. or if youre looking .25, you should opt for a .30 This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.

Read more less

DonnyFL - Fat Boy 2.0 Muzzle Brake M51 This muzzle brake or air stripper screws onto the front of the Fat Boy.  Note: This unit does not come with the individual air strippers. You can change the caliber size by using the inserts that was included with the fat boy. Features: Made of aluminum 6061 T6 Black anodize Weights 2.9 oz This silencer / moderator muzzle break is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. If your require the .25 - .30 Stripper contact us for production of FAC

Read more less

DonnyFL Tatsu Size 22 Silencer - .177 Calibre 1/2x20Unf Tatsu, or Dragon in Japanese, will be a great addition for shooters who need to take the bark out of their gun yet keep the overall length short. This is a smaller version of the popular Sumo.  As Donny FL moderators screw onto the shroud of your FX Airgun, DonnyFL would recommend going a size up when choosing your moderator. For example, if youre looking for a .177 DonnyFL would recommend using a .22. or if youre looking .25, you should opt for a .30 Available in .177/.22, .22/.25 and .25/.30 Mono-core design to increase accuracy and limit the chances of pellet clipping Precision CNC'd by professional machinist Sand blasted and anodized for maximum durability Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No hex key or torch needed to perform maintenance. Comes pre-wrapped in felt Machined grooves on the outside for easy handling. Weight is just 4.1 oz 1.6 x 4.25 inches Comes with protective red tube for easy transport and storage. This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.

Read more less

DonnyFL - Yokozuna Quick Release 25 Silencer - .25 Calibre 1/2x20Unf 1.6” DIAMETER Introducing DonnyFLs Quick Disconnect moderators. These precision-engineered moderators feature a quick detach system, ensuring consistent shooting performance with no point-of-impact changes after detaching and re-attaching. These moderators are caliber specific compared to previous versions. Crafted from high-grade aluminum, theyre robust and modular to adapt to your shooting needs. Donny recommends if you are using a rifle with a shrouded barrel or a floating barrel or a barrel that does not connect directly to the end of the barrel housing - then go up a size / caliber - just like other Donny Mods. This can help avoid clipping in some possible circumstances - happens with any mod on a floating barrel - its a top tip. Main Features Indexed locking system for consistent position and no point of impact changes. Quick detachment for easy storage and reattachment for shooting. Comes with a 1/2 x 20 female (barrel/shroud) thread adapter. Modular design for length adjustment. Crafted from 6061 T6 aluminium (individual sections) and 7075 aluminium (main QD housing and adapter).   This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.

Read more less

Umarex  - K3 Neo Airgun Silencer by Umarex (UMK3N) 1/2x20Unf 1.5” DIAMETER x 5.5" LENGTH The Umarex 3- chamber silencer suppresses the muzzle sound significantly. This silencer is made of high-quality aluminium and is ideal for all airguns .177 and .22. 1/2" UNF thread. New matt finish and tapered end for an upgraded look.  This is a single sized moderator can be used for .177 or .22. it's not dedicated for either caliber. So if your looking for a dedicated .177 or .22 mod then this is not for you. It is a tight bore for .22, so if you have any clipping check the alignment of your barrel. This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site.

Read more less

DonnyFL Sumo Size 25 Silencer - .22 Calibre 1/2x20Unf This will be your favorite LDC. Why Sumo? Rear endcaps are swappable and available in different thread types Mono-core design to increase accuracy & limit the chances of pellet clipping No moving parts or epoxy that may become loose after 1000's of rounds Precision CNC'd by professional machinist Sand blasted and anodized for maximum durability Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No hex key or torch needed when you want to perform maintenance inside the unit. Customizable, you can further dampen the sound by wrapping the interior tube with different sound absorbing materials. Comes pre-wrapped in felt Machined grooves on the outside for easy handling. Weight 5.6 oz Comes with protective red tube for easy transport and storage. *Note: If you see white lines on the inside of the front cap, that's ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. As Donny FL moderators screw onto the shroud of your FX Airgun, DonnyFL would recommend going a size up when choosing your moderator. For example, if youre looking for a .177 DonnyFL would recommend using a .22. or if youre looking .25, you should opt for a .30 This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.

Read more less

DonnyFL Tatsu Size 25 Silencer - .22 Calibre 1/2x20Unf Tatsu, or Dragon in Japanese, will be a great addition for shooters who need to take the bark out of their gun yet keep the overall length short. This is a smaller version of the popular Sumo.  As Donny FL moderators screw onto the shroud of your FX Airgun, DonnyFL would recommend going a size up when choosing your moderator. For example, if youre looking for a .177 DonnyFL would recommend using a .22. or if youre looking .25, you should opt for a .30 Available in .177/.22, .22/.25 and .25/.30 Mono-core design to increase accuracy and limit the chances of pellet clipping Precision CNC'd by professional machinist Sand blasted and anodized for maximum durability Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No hex key or torch needed to perform maintenance. Comes pre-wrapped in felt Machined grooves on the outside for easy handling. Weight is just 4.1 oz 1.6 x 4.25 inches Comes with protective red tube for easy transport and storage. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.

Read more less

DonnyFL FX Airgun Pro Size 25-30 Silencer - .22 - .25 Calibre 1/2x20UNF This is a custom size that comes with your FX airguns if you decide to upgrade the suppressor. Same length as the Tanto but slightly larger in diameter, comparable to the FX factory suppressor. This weights around 4.7 ounces. Comes with protective red tube for easy transport and storage. Built in collaboration with FX Airguns the airgun pro silencer offers maximum performance in a compact package. Available in .22-25 & .25-30 Precision cncd Approx weight 4.5 oz Mono-core design to increase accuracy and limit the chances of pellet clipping Sand blasted and anodized for maximum durability Comes pre-wrapped in felt Customizable - you can further dampen the sound Take apart in less than 10 seconds 1.36 x 5 inches As Donny FL moderators screw onto the shroud of your FX Airgun, DonnyFL would recommend going a size up when choosing your moderator. For example, if youre looking for a .177 DonnyFL would recommend using a .22. or if youre looking .25, you should opt for a .30 This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.

Read more less

Reximex - Silent Force Sound Moderator .177 .22 Long 1” DIAMETER - 6.25" Length Approx The Reximex Silent force moderator is a slim and small budget moderator, for the shooter who wants to dampen the shot noise without breaking the bank. Narrow moderators are never as sound dampening as wider, so this is a trade off between value and size. The Moderator is for 1/2 Inch UNF and is designed for .177 and .22 airguns.  To be clear if you have a free floating barrel on the rifle and it does not align correctly you may get clipping, which we are not responsible - it's your barrel not the moderator.   Key Features Broad Compatibility: Compatible with .177 .22 airguns NOT designed to be disassembled. This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.

Read more less

DonnyFL - Yokozuna Quick Release 22 Silencer - .22 Calibre 1/2x20Unf 1.6” DIAMETER Introducing DonnyFLs Quick Disconnect moderators. These precision-engineered moderators feature a quick detach system, ensuring consistent shooting performance with no point-of-impact changes after detaching and re-attaching. These moderators are caliber specific compared to previous versions. Crafted from high-grade aluminum, theyre robust and modular to adapt to your shooting needs. Please note, Donny FL does not make a dedicated 177 size in this model, so if you need a .177 - this size 22 will do. Donny recommends if you are using a rifle with a shrouded barrel or a floating barrel or a barrel that does not connect directly to the end of the barrel housing - then go up a size / caliber - just like other Donny Mods. This can help avoid clipping in some possible circumstances - happens with any mod on a floating barrel - its a top tip. Main Features Indexed locking system for consistent position and no point of impact changes. Quick detachment for easy storage and reattachment for shooting. Comes with a 1/2 x 20 female (barrel/shroud) thread adapter. Modular design for length adjustment. Crafted from 6061 T6 aluminium (individual sections) and 7075 aluminium (main QD housing and adapter).   This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.

Read more less

DonnyFL - Fat Boy 2.0 Extender Tube 1/2x20 ( Extender Only ) Need to make the fat boy quieter? You can add this 3 inch extender to capture more air and reduce the muzzle blast some more.  Features: 6061 T6 Aluminum Black anodize Matching outer tube design to the fat boy Also compatible with the Ronin and Emperor These arrive in bubble wrapping / OEM - no fancy box. This silencer / moderator extender is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. If your require the .25 - .30 Stripper contact us for production of FAC

Read more less

DonnyFL Tanto Size 22 Silencer - .177 Calibre 1/2x20Unf Tanto had been the missing member of the DonnyFL collection. It's a shorter version of the KOI but don't let the size fool you. As Donny FL moderators screw onto the shroud of your FX Airgun, DonnyFL would recommend going a size up when choosing your moderator. For example, if youre looking for a .177 DonnyFL would recommend using a .22. or if youre looking .25, you should opt for a .30 Mono-core design Precision CNC’ed by professional machinist Sand blasted and anodized for maximum durability Swappable rear end caps for 1/2 x 20 Bolt, FX (M20x1) Bolt ,1/2 x 20 Cone, Vulcan M14x1.25 and Diana Skyhawk M12x1.25 - Swappable caps NOT INCLUDED Comes pre-wrapped in felt Machined grooves on the outside for easy handling Comes with protective red tube for easy transport and storage. Ships with flat end cap both ends. This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.

Read more less

DonnyFL Sumo Size 22 Silencer - .177 Calibre 1/2x20Unf This will be your favorite LDC. Why Sumo? Rear endcaps are swappable and available in different thread types Mono-core design to increase accuracy & limit the chances of pellet clipping No moving parts or epoxy that may become loose after 1000's of rounds Precision CNC'd by professional machinist Sand blasted and anodized for maximum durability Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No hex key or torch needed when you want to perform maintenance inside the unit. Customizable, you can further dampen the sound by wrapping the interior tube with different sound absorbing materials. Comes pre-wrapped in felt Machined grooves on the outside for easy handling. Weight 5.6 oz Comes with protective red tube for easy transport and storage. *Note: If you see white lines on the inside of the front cap, that's ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. As Donny FL moderators screw onto the shroud of your FX Airgun, DonnyFL would recommend going a size up when choosing your moderator. For example, if youre looking for a .177 DonnyFL would recommend using a .22. or if youre looking .25, you should opt for a .30 This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.

Read more less

DonnyFL - RYU Quick Release 25 Silencer - .25 Calibre 1/2x20Unf 1.2” DIAMETER Introducing DonnyFLs Quick Disconnect moderators. These precision-engineered moderators feature a quick detach system, ensuring consistent shooting performance with no point-of-impact changes after detaching and re-attaching. These moderators are caliber specific compared to previous versions. Crafted from high-grade aluminium, theyre robust and modular to adapt to your shooting needs. Donny recommends if you are using a rifle with a shrouded barrel or a floating barrel or a barrel that does not connect directly to the end of the barrel housing - then go up a size / caliber - just like other Donny Mods. This can help avoid clipping in some possible circumstances - happens with any mod on a floating barrel - its a top tip. Main Features Indexed locking system for consistent position and no point of impact changes. Quick detachment for easy storage and reattachment for shooting. Comes with a 1/2 x 20 female (barrel/shroud) thread adapter. Modular design for length adjustment. Crafted from 6061 T6 aluminium (individual sections) and 7075 aluminium (main QD housing and adapter).   This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.

Read more less

Eagle Vision - SIGMA M4 Sound Moderator Interchangeable Caliber (41MM X 174MM) The Sigma Moderator / Silencer comes with 3 interchangeable caliber liners, .177 / .22 / .25 - which allow you to size for your requirements. These are exceptionally well built and great looking mods which work very well on airguns. Lots of spares included and normal high quality Eagle Vision build quality. Our multi-caliber sound moderator system can be used in different air rifles over various calibers. Interchangeable internal liner can be swapped with another caliber liner without opening the moderator with the tools provided. No moving parts, all components are secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping. All parts are manufactured by CNC; Some internal parts have tolerance of + or – 0.02. All our liners can be used with future Eagle Vision sound moderator models. The caliber specific liner reduces the sound level to a minimum. Extra vent holes on the first tube release air pressure from the first to the second chamber. The space between the first and the second tube is pre-wrapped with ballistic fiber felt to reduce sound leaving – it’s also wrapped with stainless steel wired mesh to create a stunning look. The outer groove is designed to release air and give a better grip. Also with an interchangeable end cap. Available caliber liners: .177, .22, .25 use with out liner for 30 and 35 caliber. It can be used with different calibers up to 9mm by removing the liner. Product specifications:Length: 174MMOutside Diameter: 41MMWeight: 240GMuzzle Threads size: 1/2 UNF X 20 Includes 1x Sound Moderator 1x 177 Liner (2x spare o-rings) 14grams 1x 22 Liner (2x spare o-rings)  13 grams 1x 25 Liner (2x spare o-rings)  12grams 1x Tool 1x Storage Case 1x O-ring silicone grease 1x soft bag This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site.

Read more less

EagleVision - HELIA-S34 Sound Moderator Interchangeable Caliber (Ideal For FX Panthera, King, DRS) L125mm D34mm Our multi-caliber sound moderator system can be used with different air rifles and various calibers. The interchangeable internal liner can be swapped with another caliber liner without opening the moderator, with the tools provided. There are no moving parts, all components are secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping. All parts are manufactured by CNC; Some internal parts have tolerance of + or – 0.02. All our liners can be used with future Eagle Vision sound moderator models. The caliber specific liner reduces the sound level to a minimum. The space between the first and the second tube is pre-wrapped with ballistic fiber felt to reduce the sound report. Also comes with an interchangeable end cap 1/2 UNF Available caliber liners: .177, .22, .25 Product specifications: Length: 125mm diameter: 34mm Weight: 134g End Threads size: M23X1 interchangeable to 1/2 UNF, M14X125, M18, M20 Front threads: M15x.06 Moderator materiel: aluminium anodised black Liner: materiel – aluminium anodised black End connection materiel: aluminium anodised black Air striper caliber adaptor Materiel: stainless steel   Includes: 1x Sound Moderator 1x .177 Liner (8x spare o-rings) 14g 1x .22 Liner (8x spare o-rings) 13g 1x .25 Liner (8x spare o-rings) 12g End adaptor 1/2 Inch UNF 1x Tool 1x Storage Case 1x O-ring silicone grease 1x soft protection pouch 1x Waterproof case 1x pack of grub screws, Allen key, o-rings. Please note:Before inserting the liner, you must carefully grease both O-rings located on each end.Carefully push the liner in, gently twisting it left and right, as it continues to the end.When removing the liner, and to avoid the breaking the O-rings, gently repeat the same alternating twisting procedure. This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site.

Read more less

DonnyFL - Muzzle Break QD M84 - Quick Disconnect This muzzle brake or air stripper attaches to the front of any air rifle equipped with a DonnyFL Quick Disconnect Adapter. The thread for the adapter is 1/2 Inch UNF - thats the bit that goes on the end of the barrel. Features: Made of aluminum 6061 T6 Black anodize Weights 2.9 oz Comes with M58 Air Stripper Insert Kit. - 2 x .177/.22 - 2 x .22/.25 - 2 x .25/.30 Approx 4.5 cm wide Approx 6.5cm long This silencer / moderator / muzzle break is for Unlicensed Airguns only. We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. If your require the .25 - .30 Stripper contact us for production of FAC

Read more less

Kral - Threaded 1/2 Inch UNF Moderator 1.25” DIAMETER - 8" Length Approx This is the Kral Moderator, with removable end cap for cleaning. It arrives covered in oil, thats how it arrives from us. You will need a cloth or rag. This is NOT the X or XL model. The Moderator is for 1/2 Inch UNF and is designed for .177 and .22 airguns.  To be clear if you have a free floating barrel on the rifle and it does not align correctly you may get clipping, which we are not responsible - it's your barrel not the moderator.   Key Features Broad Compatibility: Compatible with .177 .22 airguns If you disassemble it then can not get it back together - we cannot help. This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.

Read more less

Eaglevision - All in one – Muzzle Brake, Air Stripper & Harmonic Barrel Tuner MZHT-60B 1/2 UNF Fitting This Air Stripper and harmonic all in one tuner is designed to balance the rifle. Our new multi-caliber all on one Tuner system can be used in different air rifles with various calibers. The interchangeable caliber adaptor can easily be swapped for another adaptor, with the tools provided. There are no moving parts, all components are fully secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping. These products are manufactured by 5 Axis CNC tolerance of + or – 0.05 All our end adaptors can be used with future Eagle Vision sound moderators, muzzle brakes and some harmonic barrel tuner models. The caliber specific adaptor helps to increase accuracy; The front caliber adaptor with 8 holes, looks great and is designed so to allow insertion of the stainless steel bar tool, to tighten or loosen the adaptor. Caliber adaptors:.177, .22, .25 and .30 Product specifications: MZHT-60B Length:  90.3mm diameter: 35mm Weight: 303 grams End Thread: M23 X 1 Front Threads: M15X0.6 Product includes: 1x all in one main body  2x O-rings 6x grab screws 1x Allen key 1x end adaptor 1/2 UNF x 20 Each one includes: 2x stainless steel tool bar 1x Allen key 1x waterproof Storage Case 4x piece of caliber specific adaptor .177, .22, .25 and .30 (included 8x stainless steel tool bars) Product specifications: Length: 15mm Front Outside diameter: 19mm 177 Weight: 15gr 22 Weight: 14gr 25 Weight: 13gr 30 Weight: 12gr Threads: M15X0.6  Once fitted / used / fired through this product is regarded as used.

Read more less

Eagle Vision - SIGMA M51 Sound Moderator Interchangeable Caliber (L187mm x D51mm) The Sigma Moderator / Silencer comes with 3 interchangeable caliber liners, .177 / .22 / .25 - which allow you to size for your requirements. These are exceptionally well built and great looking mods which work very well on airguns. Lots of spares included and normal high quality Eagle Vision build quality. Our multi-caliber sound moderator system can be used in different air rifles over various calibers. Interchangeable internal liner can be swapped with another caliber liner without opening the moderator with the tools provided. No moving parts, all components are secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping. All parts are manufactured by CNC; Some internal parts have tolerance of + or – 0.02. All our liners can be used with future Eagle Vision sound moderator models. The caliber specific liner reduces the sound level to a minimum. Extra vent holes on the first tube release air pressure from the first to the second chamber. The space between the first and the second tube is pre-wrapped with ballistic fiber felt to reduce sound leaving – it’s also wrapped with stainless steel wired mesh to create a stunning look. The outer groove is designed to release air and give a better grip. Also with an interchangeable end cap. Available caliber liners: .177, .22, .25 use with out liner for 30 and 35 caliber. It can be used with different calibers up to 9mm by removing the liner. Product specifications:Length: 187MMOutside Diameter: 51MMWeight: 266GMuzzle Threads size: 1/2 UNF X 20 Includes 1x Sound Moderator 1x 177 Liner (2x spare o-rings) 14grams 1x 22 Liner (2x spare o-rings)  13 grams 1x 25 Liner (2x spare o-rings)  12grams 1x Tool 1x Storage Case 1x O-ring silicone grease 1x soft bag This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site.

Read more less

Eaglevision - All in one – Muzzle Brake, Air Stripper & Harmonic Barrel Tuner MZHT-60S 1/2 UNF Fitting This Air Stripper and harmonic all in one tuner is designed to balance the rifle. Our new multi-caliber all on one Tuner system can be used in different air rifles with various calibers. The interchangeable caliber adaptor can easily be swapped for another adaptor, with the tools provided. There are no moving parts, all components are fully secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping. These products are manufactured by 5 Axis CNC tolerance of + or – 0.05 All our end adaptors can be used with future Eagle Vision sound moderators, muzzle brakes and some harmonic barrel tuner models. The caliber specific adaptor helps to increase accuracy; The front caliber adaptor with 8 holes, looks great and is designed so to allow insertion of the stainless steel bar tool, to tighten or loosen the adaptor. Caliber adaptors:.177, .22, .25 and .30 Product specifications: MZHT-60S Length:  90.3mm diameter: 35mm Weight: 303 grams End Thread: M23 X 1 Front Threads: M15X0.6 Inner tube made of aluminium anodised Black outer adjustable tube made from stainless steel silver its natural colour. Product includes: 1x all in one main body  2x O-rings 6x grab screws 1x Allen key 1x end adaptor 1/2 UNF x 20 Each one includes: 2x stainless steel tool bar 1x Allen key 1x waterproof Storage Case 4x piece of caliber specific adaptor .177, .22, .25 and .30 (included 8x stainless steel tool bars) Product specifications: Length: 15mm Front Outside diameter: 19mm 177 Weight: 15gr 22 Weight: 14gr 25 Weight: 13gr 30 Weight: 12gr Threads: M15X0.6  Once fitted / used / fired through this product is regarded as used.

Read more less

Kral - Threaded 1/2 Inch UNF Moderator Model XL 1.25” DIAMETER - 8.25" Length Approx This is the Kral Moderator XL, will help remove the bark from your shot. It arrives covered in oil, thats how it arrives from us. You will need a cloth or rag. The Moderator is for 1/2 Inch UNF and is designed for .177 and .22 airguns.  To be clear if you have a free floating barrel on the rifle and it does not align correctly you may get clipping, which we are not responsible - it's your barrel not the moderator.   Key Features Broad Compatibility: Compatible with .177 .22 airguns Do not disassemble . This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.

Read more less

DonnyFL - Ronin Silencer Size 30 - .25 Calibre 1/2x20Unf 2” DIAMETER - 6.25" Length  The Ronin is big, bold, and designed to impress. While it may be overkill for .177 and .22 calibers, it looks incredibly awesome and performs exceptionally well.  Key Features: Interchangeable Rear Caps: Comes with 1/2 Inch UNF - others are extra cost. Mono-core Design: Increases accuracy and limits the chances of pellet clipping. Durable Construction: No moving parts or epoxy that may become loose after thousands of rounds. Precision CNC by professional machinists, sandblasted, and anodized for maximum durability. Easy Maintenance: Can be taken apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No hex key or torch is needed. Customizable Sound Dampening: Further dampen the sound by wrapping the interior tube with different sound-absorbing materials. Comes pre-wrapped in felt. User-Friendly Design: Machined grooves on the outside for easy handling. Lightweight: Weighs around 10.4 oz for easy handling. Convenient Transport: Comes with a protective red tube for easy transport and storage. Visual Notes: If you see white lines on the inside of the front cap, that's normal. They were caused by the prongs holding the pieces while anodizing, not pellet clippings. This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.

Read more less

Eaglevision - All in one – Muzzle Brake, Air Stripper & Harmonic Barrel Tuner MZHT-50B 1/2 UNF Fitting This Air Stripper and harmonic all in one tuner is designed to balance the rifle. Our new multi-caliber all on one Tuner system can be used in different air rifles with various calibers. The interchangeable caliber adaptor can easily be swapped for another adaptor, with the tools provided. There are no moving parts, all components are fully secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping. These products are manufactured by 5 Axis CNC tolerance of + or – 0.05 All our end adaptors can be used with future Eagle Vision sound moderators, muzzle brakes and some harmonic barrel tuner models. The caliber specific adaptor helps to increase accuracy; The front caliber adaptor with 8 holes, looks great and is designed so to allow insertion of the stainless steel bar tool, to tighten or loosen the adaptor. Caliber adaptors:.177, .22, .25 and .30 Product specifications: MZHT-50B Length:  90.3mm diameter: 35mm Weight: 303 grams End Thread: M23 X 1 Front Threads: M15X0.6 Inner tube made of aluminium anodised Black outer adjustable tube made from stainless steel silver its natural colour. Product includes: 1x all in one main body  2x O-rings 6x grab screws 1x Allen key 1x end adaptor 1/2 UNF x 20 Each one includes: 2x stainless steel tool bar 1x Allen key 1x waterproof Storage Case 4x piece of caliber specific adaptor .177, .22, .25 and .30 (included 8x stainless steel tool bars) Product specifications: Length: 15mm Front Outside diameter: 19mm 177 Weight: 15gr 22 Weight: 14gr 25 Weight: 13gr 30 Weight: 12gr Threads: M15X0.6  Once fitted / used / fired through this product is regarded as used.

Read more less

Eaglevision - All in one – Muzzle Brake, Air Stripper & Harmonic Barrel Tuner MZHT-50S 1/2 UNF Fitting This stainless steel Air Stripper and harmonic all in one tuner is designed to balance the rifle. Our new multi-caliber all on one Tuner system can be used in different air rifles with various calibers. The interchangeable caliber adaptor can easily be swapped for another adaptor, with the tools provided. There are no moving parts, all components are fully secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping. These products are manufactured by 5 Axis CNC tolerance of + or – 0.05 All our end adaptors can be used with future Eagle Vision sound moderators, muzzle brakes and some harmonic barrel tuner models. The caliber specific adaptor helps to increase accuracy; The front caliber adaptor with 8 holes, looks great and is designed so to allow insertion of the stainless steel bar tool, to tighten or loosen the adaptor. Caliber adaptors:.177, .22, .25 and .30 Product specifications: MZHT-50S Length:  90.3mm diameter: 35mm Weight: 303 grams End Thread: M23 X 1 Front Threads: M15X0.6 Inner tube made of aluminium anodised Black outer adjustable tube made from stainless steel silver its natural colour. Product includes: 1x all in one main body  2x O-rings 6x grab screws 1x Allen key 1x end adaptor 1/2 UNF x 20 Each one includes: 2x stainless steel tool bar 1x Allen key 1x waterproof Storage Case 4x piece of caliber specific adaptor .177, .22, .25 and .30 (included 8x stainless steel tool bars) Product specifications: Length: 15mm Front Outside diameter: 19mm 177 Weight: 15gr 22 Weight: 14gr 25 Weight: 13gr 30 Weight: 12gr Threads: M15X0.6  Once fitted / used / fired through this product is regarded as used.

Read more less

EagleVision - HELIA S50 Sound Moderator L128.5 mm D50mm Our multi-caliber sound moderator system can be used with different air rifles and various calibers. The interchangeable internal liner can be swapped with another caliber liner without opening the moderator, with the tools provided. There are no moving parts, all components are secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping. All parts are manufactured by CNC; Some internal parts have tolerance of + or – 0.02. All our liners can be used with future Eagle Vision sound moderator models. The caliber specific liner reduces the sound level to a minimum. The space between the first and the second tube is pre-wrapped with ballistic fiber felt to reduce the sound report. Also comes with an interchangeable end cap 1/2 UNF Available caliber liners: .177, .22, .25 Product Specifications: Length: 128.5mm Diameter: 50mm Weight: 191g (without the end adaptor and air stripper caliber adaptors) End Thread Size: M23x1 (interchangeable to 1/2 UNF, M14x1.25, M18, M20) Front Threads: M15x0.6 Moderator Material: Black anodized aluminum Liner Material: Black anodized aluminum End Connection Material: Black anodized aluminum Air Stripper Caliber Adaptor Material: Stainless steel Includes: 1x Sound Moderator 1x .177 Air Stripper Caliber Adaptor – 21g 1x .22 Air Stripper Caliber Adaptor – 20g 1x .25 Air Stripper Caliber Adaptor – 18g 1x .30 Air Stripper Caliber Adaptor – 16g 1x Tightening Tool 1x Soft Protection Pouch 1x Storage Waterproof Case 1x Pack of Grub Screws, Allen Key, O-rings Please note: Before inserting the liner, you must carefully grease both O-rings located on each end.Carefully push the liner in, gently twisting it left and right, as it continues to the end.When removing the liner, and to avoid the breaking the O-rings, gently repeat the same alternating twisting procedure. This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site.

Read more less

Kral - Threaded 1/2 Inch UNF Moderator 1.25” DIAMETER - 8" Length Approx Stainless Colour - Not Made of Stainless The picture makes the mod look pinkish....it's the photo it is more silverish. This is the Kral Moderator, with removable end cap for cleaning. It arrives covered in oil, thats how it arrives from us. You will need a cloth or rag. This is NOT the X or XL model. The Moderator is for 1/2 Inch UNF and is designed for .177 and .22 airguns.  To be clear if you have a free floating barrel on the rifle and it does not align correctly you may get clipping, which we are not responsible - it's your barrel not the moderator.   Key Features Broad Compatibility: Compatible with .177 .22 airguns If you disassemble it then can not get it back together - we cannot help. This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.

Read more less

EagleVision - HELIA-S40 Sound Moderator L125 mm D40mm Our multi-caliber sound moderator system can be used with different air rifles and various calibers. The interchangeable internal liner can be swapped with another caliber liner without opening the moderator, with the tools provided. There are no moving parts, all components are secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping. All parts are manufactured by CNC; Some internal parts have tolerance of + or – 0.02. All our liners can be used with future Eagle Vision sound moderator models. The caliber specific liner reduces the sound level to a minimum. The space between the first and the second tube is pre-wrapped with ballistic fiber felt to reduce the sound report. Also comes with an interchangeable end cap 1/2 UNF Available caliber liners: .177, .22, .25 Product Specifications: Length: 125mm Diameter: 40mm Weight: 141g (without the end adaptor and air stripper caliber adaptors) End Thread Size: M23x1 (interchangeable to 1/2 UNF, M14x1.25, M18, M20) Front Threads: M15x0.6 Moderator Material: Black anodized aluminum Liner Material: Black anodized aluminum End Connection Material: Black anodized aluminum Air Stripper Caliber Adaptor Material: Stainless steel Includes: 1x Sound Moderator 1x .177 Air Stripper Caliber Adaptor – 21g 1x .22 Air Stripper Caliber Adaptor – 20g 1x .25 Air Stripper Caliber Adaptor – 18g 1x .30 Air Stripper Caliber Adaptor – 16g 1x Tightening Tool 1x Soft Protection Pouch 1x Storage Waterproof Case 1x Pack of Grub Screws, Allen Key, O-rings Please note: Before inserting the liner, you must carefully grease both O-rings located on each end.Carefully push the liner in, gently twisting it left and right, as it continues to the end.When removing the liner, and to avoid the breaking the O-rings, gently repeat the same alternating twisting procedure. This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site.

Read more less

EagleVision - HELIA-S45 Sound Moderator L126.5mm D44mm Our multi-caliber sound moderator system can be used with different air rifles and various calibers. The interchangeable internal liner can be swapped with another caliber liner without opening the moderator, with the tools provided. There are no moving parts, all components are secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping. All parts are manufactured by CNC; Some internal parts have tolerance of + or – 0.02. All our liners can be used with future Eagle Vision sound moderator models. The caliber specific liner reduces the sound level to a minimum. The space between the first and the second tube is pre-wrapped with ballistic fiber felt to reduce the sound report. Also comes with an interchangeable end cap 1/2 UNF Available caliber liners: .177, .22, .25 Product Specifications: Length: 126.5mm Diameter: 45mm Weight: 159g (without the end adaptor and air stripper caliber adaptors) End Thread Size: M23x1 (interchangeable to 1/2 UNF, M14x1.25, M18, M20) Front Threads: M15x0.6 Moderator Material: Black anodized aluminum Liner Material: Black anodized aluminum End Connection Material: Black anodized aluminum Air Stripper Caliber Adaptor Material: Stainless steel Includes: 1x Sound Moderator 1x .177 Air Stripper Caliber Adaptor – 21g 1x .22 Air Stripper Caliber Adaptor – 20g 1x .25 Air Stripper Caliber Adaptor – 18g 1x .30 Air Stripper Caliber Adaptor – 16g 1x Tightening Tool 1x Soft Protection Pouch 1x Storage Waterproof Case 1x Pack of Grub Screws, Allen Key, O-rings Please note: Before inserting the liner, you must carefully grease both O-rings located on each end.Carefully push the liner in, gently twisting it left and right, as it continues to the end.When removing the liner, and to avoid the breaking the O-rings, gently repeat the same alternating twisting procedure. This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site.

Read more less

DonnyFL - Emperor Silencer .177 .22 .25 Calibre 1/2x20Unf 2” DIAMETER - 10.5" Length  The DonnyFL EMPEROR v3 is designed for the serious airgunner. This version features a mono-core design and allows you to screw on an optional 6.5-inch extender to make it even quieter. Extender is an optional extra, not included. To be clear this is a 30 size hole in the moderator, this is fixed as a diameter. Key Features Broad Compatibility: Compatible with .177 .22, .25 airguns. Versatile Endcaps: Ships with 1/2 Inch UNF Bolt endcap. Durable Construction: Made from 6061 aluminum and precision CNC machined for maximum durability and performance. Noise Reduction: Comes pre-wrapped in felt and stainless steel mesh for enhanced sound suppression. Easy Handling: Machined grooves on the outside for a secure grip. Customizable Length: Optional 6.5-inch extender available to further reduce noise. Extra Cost Lightweight: Weighs around 16 ounces for easy handling and transport. Protective Storage: Comes with a protective red tube for convenient transport and storage. This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.

Read more less

DonnyFL - Ronin Silencer Size 25 - .22 Calibre 1/2x20Unf 2” DIAMETER - 6.25" Length  The Ronin is big, bold, and designed to impress. While it may be overkill for .177 and .22 calibers, it looks incredibly awesome and performs exceptionally well.  Key Features: Interchangeable Rear Caps: Comes with 1/2 Inch UNF - others are extra cost. Mono-core Design: Increases accuracy and limits the chances of pellet clipping. Durable Construction: No moving parts or epoxy that may become loose after thousands of rounds. Precision CNC by professional machinists, sandblasted, and anodized for maximum durability. Easy Maintenance: Can be taken apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No hex key or torch is needed. Customizable Sound Dampening: Further dampen the sound by wrapping the interior tube with different sound-absorbing materials. Comes pre-wrapped in felt. User-Friendly Design: Machined grooves on the outside for easy handling. Lightweight: Weighs around 10.4 oz for easy handling. Convenient Transport: Comes with a protective red tube for easy transport and storage. Visual Notes: If you see white lines on the inside of the front cap, that's normal. They were caused by the prongs holding the pieces while anodizing, not pellet clippings. This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.

Read more less

DonnyFL - Shogun Silencer Size 30 - .25 Calibre 1/2x20Unf 1.6” DIAMETER - 8" Length  If you thought the Sumo was quiet, wait until you hear the Shogun! The Shogun features the same diameter as the Sumo but is 1.5 inches longer, providing additional noise reduction. With an extra 1-inch chamber and expanded first and exit chambers, this design is highly effective in reducing noise. Key Features: Superior Noise Reduction: Additional 1-inch chamber and increased first and exit chambers for enhanced sound suppression. Interchangeable Threaded End Caps: Choose from various threaded end caps for versatile compatibility - not included. This comes with Bolt end cap. Mono-core Design: Increases accuracy and limits the chances of pellet clipping. Durable Construction: No moving parts or epoxy that may become loose after thousands of rounds. Precision CNC'd by professional machinists, sandblasted, and anodized for maximum durability. Easy Maintenance: Can be taken apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No key or torch needed. Customizable Sound Dampening: Further dampen the sound by wrapping the interior tube with different sound-absorbing materials. Comes pre-wrapped in felt. User-Friendly Design: Machined grooves on the outside for easy handling. Lightweight: Weighs just 7.2 oz for easy handling. Convenient Transport: Comes with a protective red tube for easy transport and storage. Visual Notes: If you see white lines on the inside of the front cap, that's normal. They were caused by the prongs holding the pieces while anodizing, not pellet clippings. This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.

Read more less

DonnyFL - Shogun Silencer Size 25 - .22 Calibre 1/2x20Unf 1.6” DIAMETER - 8" Length  If you thought the Sumo was quiet, wait until you hear the Shogun! The Shogun features the same diameter as the Sumo but is 1.5 inches longer, providing additional noise reduction. With an extra 1-inch chamber and expanded first and exit chambers, this design is highly effective in reducing noise. Key Features: Superior Noise Reduction: Additional 1-inch chamber and increased first and exit chambers for enhanced sound suppression. Interchangeable Threaded End Caps: Choose from various threaded end caps for versatile compatibility - not included. This comes with Bolt end cap. Mono-core Design: Increases accuracy and limits the chances of pellet clipping. Durable Construction: No moving parts or epoxy that may become loose after thousands of rounds. Precision CNC'd by professional machinists, sandblasted, and anodized for maximum durability. Easy Maintenance: Can be taken apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No key or torch needed. Customizable Sound Dampening: Further dampen the sound by wrapping the interior tube with different sound-absorbing materials. Comes pre-wrapped in felt. User-Friendly Design: Machined grooves on the outside for easy handling. Lightweight: Weighs just 7.2 oz for easy handling. Convenient Transport: Comes with a protective red tube for easy transport and storage. Visual Notes: If you see white lines on the inside of the front cap, that's normal. They were caused by the prongs holding the pieces while anodizing, not pellet clippings. This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.

Read more less

DonnyFL - KOI Silencer Size 25 - .22 Calibre 1/2x20Unf 1.22” DIAMETER - 7" Length  With a rugged front cap design, signature DonnyFL body grooves, and bolt endcap, the KOI is a fantastic addition to any shrouded or un-shrouded air rifle. It has the smallest outer diameter compared to other DonnyFL models, but don't let the size fool you—it's just as impressive! Key Features: Mono-core Design: Precision CNC machined by professional machinists. Durable Construction: Sandblasted and anodized for maximum durability. Swappable Rear End Caps: This comes with with 1/2 x 20 Bolt Noise Reduction: Comes pre-wrapped in felt for enhanced sound suppression. Easy Handling: Machined grooves on the outside for a secure grip. Protective Transport: Comes with a protective red tube for easy transport and storage. Weight Specifications: With 1/2 x 20 Bolt rear end cap: 4.7 oz This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.

Read more less

DonnyFL - KOI Silencer Size 22 - .177 Calibre 1/2x20Unf 1.22” DIAMETER - 7" Length  With a rugged front cap design, signature DonnyFL body grooves, and bolt endcap, the KOI is a fantastic addition to any shrouded or un-shrouded air rifle. It has the smallest outer diameter compared to other DonnyFL models, but don't let the size fool you—it's just as impressive! Key Features: Mono-core Design: Precision CNC machined by professional machinists. Durable Construction: Sandblasted and anodized for maximum durability. Swappable Rear End Caps: This comes with with 1/2 x 20 Bolt Noise Reduction: Comes pre-wrapped in felt for enhanced sound suppression. Easy Handling: Machined grooves on the outside for a secure grip. Protective Transport: Comes with a protective red tube for easy transport and storage. Weight Specifications: With 1/2 x 20 Bolt rear end cap: 4.7 oz This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.

Read more less