
Age verification
Please confirm that you are 18 years or older to enter the shop.
Have patience...
You are not old enough to visit the shop yet.
Saber Tactical - Extended Quick Disconnect - Foster Fitting M32 This extended quick disconnect (QD) makes it easy for those guns with hard to reach fill nipples. A must have for FX Impacts and other small finger space rifles. You will need to screw this into your exisitng connection on your pump / bottle - supplied with a delrin washer to help create a tight seal. Suggest small amount of PTFE tape on thread to help give that extra seal ( tape not supplied ) Male foster fitting Max 4500 psi (Do not exceed recommended pressure) Release collar close to 1.20 inches long
£19.99
Stainless Steel Extended Quick Disconnect - Foster Fitting M32 This extended quick disconnect (QD) makes it easy for those guns with hard to reach fill nipples. A must have for FX Impacts. Male foster fitting Max 4500 psi (Do not exceed recommended pressure) Release collar close to 1.20 inches long This product attaches to your existing high pressure foster connecting. Caution you are using High Pressure Air. This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun 101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting or failure of this product.
£24.99
BEST Fittings Quick Coupler Plug Add more fill probes to your BEST Fittings Starter Kit, BEST Fittings QC02 Quick Coupler Socketor compatible Foster 12FS, 12FSS and 12MS Straight Thru Quick Snap Couplers. Quality Stainless Steel, made in the UK. BEST Fittings Quick Coupler Plugs QC03 will also connect directly to the snap coupler supplied with many popular rifles such as Daystate, Crosman, Benjamin etc. So if you already have one of those, then simply fit one of our Quick Coupler Plugs to each of your other fill probes to enjoy swift interchange of fill connectors. Please note that BEST Fittings standard quick coupler male components are not compatible with the all stainless steel Brocock Enigma & AimX Original Fitment connector. We do however offer a suitable component for that product, 02B3-ML04 Brocock Compatible Quick Coupler Plug. Examples of compatible fill probes, adaptors and guns below: Air Arms: s200, s300, s310, s400, s410, s510, TDR, FTP900, EV2, Protarget, MPR, Shamal, XM100, NJR100, TM100 etc.Armex: X10 etc.BSA: Superten, Hornet, Ultra, Scorpion (T-10 and SE models also) R10, Lonestar etc.Benjamin: Marauder, Challenger, Discovery, Silhouette etc.Brocock: Enigma, Elite, Grand Prix, Aim X, Hunter, Contour, Concept etcCareer/Samyang/Sumatra: 707 909 2500 etcDaystate: Air Wolf/Air Ranger, Huntsman, Harrier, X2, Wolverine, LR90, PH6, MK3, MK4 etcEvanix: Blizzard, AR6, S10, Conquest etcFalcon: Prairie & FN silencer quick fill (FN8 FN12 FN19) etcFX: Axsor, 2000, Tarantula, Gemini, Cyclone, Gladiator, Verminator, Typhoon, Monsoon, T12, Cutlas, Ranchero, Super Swift, Storm, Rapier, Timber Wolf, Bobcat, Ultimate, Elite, Revolution, Royal etcGamo: Dynamax etcHatsan: AT-44, AT4,4 AT65, Galatian etcLogun: Axsor, Gemini, Solo, MK1, MK2 Professional, Eagle, S16 etcEdgar: XViPrestige: Cub, Kub, Blackcat etcRipley: XL9, AR5 etcRWS: Rapier, Elite, Scimitar, Excalibre, Series 50, 500, LR20, LR25 etcTheoben: Rapid 7, R7, MK1, MK2, MKII, MFR etcWebley: FX2000, Axsor, Raider, Raider 10, Spectre, Venom, Viper, Sidewinder, Mamba etcWeihrauch: HW100, HW101 etc CAUTION - You are working with high pressure air, always be safe. Airgun 101 Shop is not responsible for any injury / damage to any person, third party or item when using this part.
£6.50
Hill 3-Stage Stirrup Pump Mk5 with dry pac The 5th Generation Hill PCP Pump with Dry-Pac. The trusted style and familiarity of Hill pumps on the outside but all new on the inside... Our Easiest Pump Yet - Around 20% easier to use for the average person Reach Higher Pressures - Our MK5 pump will reach 300 BAR / 4500 PSI and at a much easier rate for users. Quick Service - Faster and Easier than ever to service our MK5 pump than our previous generations. Patented Hill Dry-Pac System - Removes around 90% of moisture from the air going into your gun, giving you clean, dry air. This pump will require assembly at home. We are not responsible for any harm or damage caused by this product to any person or item or belonging. This uses High Pressure air and you must always be cautious using this product. Safety First .
£179.99
FX Buddy Bottle Valve Replacement O-Rings FX Buddy Bottle Valve Replacement Sealing O-Rings Suits BEST Fittings and OEM FX Valves. PHOTO SHOWS 6 ORINGS - YOU ACTUALLY GET 5. These O-Rings are to replace the ones found inside the recess in the Buddy Bottle Valve where it screws onto the action and seals the air once the valve is opened. If you can hear air escaping from around the valve when the Buddy Bottle or Air Reservoir is screwed on, then it is likely to be this o-ring that needs replacing. This is for the O Ring, the bottle or valve is NOT included. CAUTION - You are working with high pressure air, always be safe. Airgun 101 Shop is not responsible for any injury / damage to any person, third party or item when using this part.
£4.50
Weihrauch HW100 and HW110 Quick Fill Probe Current Style Air Arms Female Fill Adaptor. Suits the Air Arms S400/S410/S200, S510, Alpha Pistol etc This is the “Egg Cup” hose fitting with the ‘T BAR” slot to locate on the new style fill valve with the ‘T BAR” retainer on the end of the filling valve. Also fits early ‘New Style’ valves without the T bar on the end of the fill valve. (Quite rare) CAUTION - You are working with high pressure air, always be safe. Airgun 101 Shop is not responsible for any injury / damage to any person, third party or item when using this part.
£15.00
Air Arms Current Style T-Bar Female Fill Connector Current Style Air Arms Female Fill Adaptor. Suits the Air Arms S400/S410/S200, S510, Alpha Pistol etc This is the “Egg Cup” hose fitting with the ‘T BAR” slot to locate on the new style fill valve with the ‘T BAR” retainer on the end of the filling valve. Also fits early ‘New Style’ valves without the T bar on the end of the fill valve. (Quite rare) CAUTION - You are working with high pressure air, always be safe. Airgun 101 Shop is not responsible for any injury / damage to any person, third party or item when using this part.
£15.00
FX Airguns Sweden Fill Probe Fill probe for the FX range of probe fill airguns. Standard 1/8″ BSP male thread for direct fitting to a flexible fill line or our Quick Coupler Plugs. Complete with two spare O-rings and silicone grease kit. Suits: FX Verminator, FX Verminator Mk11, FX Verminator Mk11 Extreme, FX Typhoon, FX T12, FX Royale 300, FX Royale 400, FX Royale 500, FX Ranchero, FX Cyclone, FX Bobcat, FX Wildcat, FX Bobcat MK11, FX Indy, FX Indy Arrow, FX Biathlon, FX Independence, FX Gladiator, FX Storm, FX Ranchero. CAUTION - You are working with high pressure air, always be safe. Airgun 101 Shop is not responsible for any injury / damage to any person, third party or item when using this part.
£15.00
DIN Male fitted with Microbore Hose 450mm BEST Fittings 232/300 BAR DIN Male fitted with a high quality 450mm Microbore Hose and Strain Reliever Spring. Please note that the Strain Reliever Spring will not prevent the hose from kinking, but will offer some relief when hanging from your cylinder. CAUTION - You are working with high pressure air, always be safe. Airgun 101 Shop is not responsible for any injury / damage to any person, third party or item when using this part.
£18.50
AGT Vulcan Fill Probe AGT Vulcan Fill Probe Standard 1/8″BSP male thread for direct fitting to a flexible fill line or our Quick Coupler Plugs. Complete with two spare O-rings and silicone grease kit. CAUTION - You are working with high pressure air, always be safe. Airgun 101 Shop is not responsible for any injury / damage to any person, third party or item when using this part.
£15.00
Steyr LG Quick Fill Probe Suits Steyr LG rifles fitted with the Quick Fill Probe filling system. Standard 1/8″BSP male thread for direct fitting to a flexible fill line or our Quick Coupler Plugs. Complete with two spare O-rings and silicone grease kit. CAUTION - You are working with high pressure air, always be safe. Airgun 101 Shop is not responsible for any injury / damage to any person, third party or item when using this part.
£15.00
Walther Rotex R8 and RM8 Fill Probe BEST Fittings responded to customer requests and produced a filling probe for the Walther Rotex R8 PCP that allows for use with our quick coupler plugs and sockets, as the original probe is difficult to seal being round with two flats. Standard 1/8″BSP male thread and hex nut for direct fitting to a flexible fill line or BEST Fittings quick coupler plug. Complete with 2 spare ‘O’ rings and a sachet of silicone lube. CAUTION - You are working with high pressure air, always be safe. Airgun 101 Shop is not responsible for any injury / damage to any person, third party or item when using this part.
£15.00
BSA Fill Probe Straight This is the STRAIGHT design. Straight design suitable for BSA Hornets, Scorpions, Ultras R-10, High Fill Spitfire and Firebird. Standard 1/8″ BSP male thread for direct fitting to a flexible fill line or one of our Quick Coupler Plugs. Complete with two spare ‘O’ rings and a sachet of silicone grease. DOUBLE CHECK - They make another probe Stepped Design Suitable for Scorpion Cadet (Gauge at front of rifle) Goldstar SE, Coyote & Buccaneer (Export Only) and GAMO Coyote CAUTION - You are working with high pressure air, always be safe. Airgun 101 Shop is not responsible for any injury / damage to any person, third party or item when using this part.
£15.00
Hatsan PCP Fill Probe Hatsan PCP Fill Probe, fits all models.. Standard 1/8″ BSP male thread for direct fitting to a flexible fill line or our Quick Coupler Plugs. Complete with two spare O-rings and silicone grease. CAUTION - You are working with high pressure air, always be safe. Airgun 101 Shop is not responsible for any injury / damage to any person, third party or item when using this part.
£15.00
Saber Tactical - Tank Valve Adapter M18x1.5 Airgun101 is proud to offer some of the ultimate accessories for FX Airguns. This adapter allows you to convert the threads on our tank valve ( here for Tank Valve ) from 7/8-14 to M18x1.5. The M18x1.5 is common on carbon fiber gun tanks. Features: 7075 Aluminum Black Anodize Female 7/8-14 threads Male M18x1.5 threads This is the adapter only. Using this item requires your dive tank / bottle to be removed of all the air. SAFETY FIRST, this is working with high pressure air that can result in injury if you get it wrong. We are NOT responsible for any harm injury or damage to any person or item if you get it wrong. This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun 101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.
£29.99
Saber Tactical - Tank / Dive Bottle Valve Airgun101 is proud to offer some of the ultimate accessories for FX Airguns. Replace your factory tank valve with our larger valve. The large knobs and handle make filling and releasing air a breeze! Features: Open and close tank with a 2.25 inch knob Drain the line with the 1.25 inch knob Dead head to test the tank's pressure 2.2 inch gauge display Tank thread 7/8-14 UNF Pair with ST0037 adapter to be able to screw on carbon fiber gun bottles. if you attempt to fit this and cannot complete the process - this becomes a used item. Using this item requires your dive tank / bottle to be removed of all the air. SAFETY FIRST, this is working with high pressure air that can result in injury if you get it wrong. We are NOT responsible for any harm injury or damage to any person or item if you get it wrong. This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun 101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.
£230.00£199.99
Kral Arms Airgun Fill Probe Kral Arms Fill Probe Standard 1/8″BSP male thread for direct fitting to a flexible fill line or our Quick Coupler Plugs. Complete with two spare O-rings and silicone grease kit. CAUTION - You are working with high pressure air, always be safe. Airgun 101 Shop is not responsible for any injury / damage to any person, third party or item when using this part.
£15.00
Daystate Regal Regulated Fill Probe Current Style Air Arms Female Fill Adaptor. Suits the Air Arms S400/S410/S200, S510, Alpha Pistol etc This is the “Egg Cup” hose fitting with the ‘T BAR” slot to locate on the new style fill valve with the ‘T BAR” retainer on the end of the filling valve. Also fits early ‘New Style’ valves without the T bar on the end of the fill valve. (Quite rare) CAUTION - You are working with high pressure air, always be safe. Airgun 101 Shop is not responsible for any injury / damage to any person, third party or item when using this part.
£15.00
BSA Airgun Fill Probe Stepped This is the STEPPED design. Stepped Design Suitable for Scorpion Cadet (Gauge at front of rifle) Goldstar SE, Coyote & Buccaneer (Export Only) and GAMO Coyote Standard 1/8″ BSP male thread for direct fitting to a flexible fill line or one of our Quick Coupler Plugs. Complete with two spare ‘O’ rings and a sachet of silicone grease. DOUBLE CHECK - They make another probe Straight design suitable for BSA Hornet, Scorpion, Ultra, R-10, High Fill, Spitfire and Firebird. CAUTION - You are working with high pressure air, always be safe. Airgun 101 Shop is not responsible for any injury / damage to any person, third party or item when using this part.
£15.00
KalibrGun Cricket Airgun Fill Probe Hex Head BEST Fittings – 14mm Hex Head with 1/8″ BSP male thread for direct fitting to a flexible fill line or one of our Quick Coupler Plugs. Complete with two spare ‘O’ rings and a sachet of silicone grease. CAUTION - You are working with high pressure air, always be safe. Airgun 101 Shop is not responsible for any injury / damage to any person, third party or item when using this part.
£15.00
FX Airguns - 4 Stage Stirrup Pump 500MM Hose 1/8 Thread The new turbopump is equipped with a patented 4 stage system. It has a unique gearing system that gives you the opportunity to gear down when it gets rough. It allows the user to choose if they want high volume (300 cc) with lower pressure. Or low volume (200 cc) with higher pressure. Features:Pressure gauge, moisture trap, particle filter (replaceable), and bleed valve. Unique gearing system.Connections:Kevlar hose 0,5 m with 1/8 thread. Dimensions:Height 640mm (extracted 1090mm), Width: 205mm, Depth: 130mm. Weight:Approximately 2kg. You will need to fit your filling adapter onto the end, we suggest a small amount of thread seal tape and a pair of spanners to do this. Does not come with the fill probe pictured.
£187.99
BEST Fittings – EXTENDED Quick Coupler Socket 1/8" BSP The BEST Fittings EXTENDED Quick Coupler Socket. Our new socket has been designed to allow connection to “Foster Type” fill nipples that are recessed deeply within the stock. If you need a coupler release tool, then this socket should overcome that problem as the release collar is a full 30mm long, as opposed to the 10.5mm long on our standard coupler. CAUTION - You are working with high pressure air, always be safe. Airgun 101 Shop is not responsible for any injury / damage to any person, third party or item when using this part.
£15.00
BEST Fittings Swivelling Quick Detach Hose Kit Easily remove your hose to protect from damage in transit or for easy storage. Allows the hose to rotate freely to the desired position without straining. Comes complete with a BEST Fittings Cylinder Residual Pressure Test / Dust Plug so that you can see what air you have remaining in your cylinder. This kit is the adapters in picture one, it does NOT include the bottle or the hose. CAUTION - You are working with high pressure air, always be safe. Airgun 101 Shop is not responsible for any injury / damage to any person, third party or item when using this part.
£20.00
DIN Male fitted with Microbore / Ultima Hose 600mm BEST Fittings 232/300 BAR DIN Male fitted with a BEST Fittings 600 mm ULTIMA Stainless Steel Braided Hose. Extremely durable. CAUTION - You are working with high pressure air, always be safe. Airgun 101 Shop is not responsible for any injury / damage to any person, third party or item when using this part.
£32.50
FX Airguns - 3 Stage Stirrup Pump 500MM Hose 1/8 Thread The easiest, most convenient and affordable way to charge your airguns patented three way system gives you 200 bar with ease. Maximum fill pressure 250 bar. Features:Pressure gauge, moisture trap, particle filter (replaceable), and bleed valve. Connections: Kevlar hose 0,5 m with 1/8 thread. Dimensions:Height 615mm (extracted 1070mm), Width: 205mm, Depth: 130mm. Weight:Approximately 2kg. You will need to fit your filling adapter onto the end, we suggest a small amount of thread seal tape and a pair of spanners to do this. Does not come with the fill probe pictured.
£166.00
Please confirm that you are 18 years or older to enter the shop.
You are not old enough to visit the shop yet.