Want to see on paper the difference range makes when you shoot then these are ideal for zeroing and learning how to dial your scope for ranges. 100 Targets in a pack 10 Plastic holders included - but can be used as a regular target (stuck to something else)  Targets Approx 3 x 4 Inches

Read more less

Airgun Paper Targets 100 Pack - 14cm x 14cm - 5 Circle 14cm x 14cm 100 Targets in pack Will fit the Jack Pyke steel paper target holder  

Read more less

Double Mini Spinner Targets - 2x20/25mm Screw-in air rifle targets, just screw them to trees, fences or any other wooden item. Improve your shooting target practice. 1 x 20mm - target spot 1 x 25mm - target spot 105mm long All steel construction. Designed for UK Sub 12 Ft Lb Airguns

Read more less

Jack Pyke Mini Spinner Targets 4 in Pack  Fix directly in to trees or fence posts. Ideal for your own shooting range & target practice. Target spot size Screw-in air rifle targets. Just screw 1 x 20mm  1 x 25mm 1 x 30mm 1 x 40mm All steel construction. 85mm long Designed for UK Sub 12 Ft Lb Airguns

Read more less

Knock Down Air Rifle Target Set - Jack Pyke 4 Animal Knock Down Set Sizes: Boar 10cm x 7cm Duck 5.5cm x 5.5cm Bird 4cm x 4.1cm Mouse 3.8cm x 3.5cm Made from 3.5mm Steel - Painted Red Each animal is free standing. Ideal for speed shoot competitions. Designed for Sub 12 Ft Lbs Airguns

Read more less

Steel Target Airgun Pellet Catcher 14cm x 14cm Includes 10 paper targets Paper target size 14cm x 14cm Designed for UK Sub 12 Ft Lb Airguns.

Read more less

5 Spinner Reset Airgun Target 5 Spinner reset target, ideal for home or the range. Hit the 4 lower targets, they flip up, and hit the 5th top target to knock them back down again.  Ideal for speed shooting. 38cm x 26cm 5 Targets on Steel frame Target is designed for Sub 12 FT Airguns. This product is not returnable after use, as it will have been shot at.  Suggested UK / EU use best.

Read more less

Bottle Target Blanks Holder - GR8Fun This is a steel target, designed for Sub 12 FT LB airguns, and it brings a huge smile to the shooter. Load the holes with .22 crimped blanks, and then be super accurate with your shooting, and when you are the bang is the reward. .22 Crimped blanks can be bought by anyone over 18 yrs from your local Gun Store - usually in packs of 100 for under £10 - thats a lot of bang for your buck, much better value than single shot exploding targets. This target holder ships WITHOUT blanks, you need to purchase them from your local gun store, they should not be purchased through the post - Royal Mail banned item. 3.5mm Metal Plate 5.5mm approx target holes Some home assembly / couple of bolts required. When loaded this will go bang, so best used where it won't annoy the neighbours.

Read more less

Umarex Pellet Trap - Duck Hunter This rugged pellet trap made of sheet steel provides hours of reliable service – safe shooting for young and old. Pellet trap, black, with four steel duck silhouettes. When the smaller center target is hit all targets return to the upright position. Suitable for pellets up to 7.5 Joules / 6ft Lbs However if your rifle is a full Sub 12 Ft Lb - you can still use it, just put the target out 35m away, the pellet speed will drop enough to not be too damaging to the target. The targets stay down using magnets, it has to be a clean good hit....its magnets you have to allow for sometimes the laws of magnetism not working. TECHNICAL DATA suitable for < 7.5 J Usage stand-alone, top mount, wall mount Material steel Dimensions (mm) 500 x 225 x 200 Weight 5200 g Sub 12 Ft Lb air rifles will damage this target - thus it's your error if you shoot it with something too powerful too close.  Also - its designed to be shot at, it will get damaged when being shot at - so we don't repair them or warranty them if they have been shot at...so a little home DIY may be needed to keep it running long term.

Read more less

Dove/Pigeon Kill Zone 2 Point Target - GR8Fun This is a steel target, with 2 kill zones. Simple - shoot one zone to reset the other, no strings required. Kill zone is either a heart/lung or head shot. Powder coated in black with yellow strike plates, easy to see. These are metal parts, powder coated and thus will gain some marks during shipping and they ain't been painted by Picasso, they look good and work well. Designed to be shot at so you will need to repaint as you shoot the paint off. Sits on a metal plate approx 15cm deep, a big double T shape plate. Designed for Sub 12 FT LB Airguns 3.5mm Metal Plate Some home assembly / couple of bolts required. 27cm approx diagonal width 15cm approx wide

Read more less

Pigeon Spinner Target For a quick target practice on the spot the Jack Pyke Spinner Target Pigeon is possibly the best choice out there. Simply attach it to the post or wall with an included screw and you are all set. Choose your target between the 35mm pigeon or 45mm in diameter disc. Works well with air rifles and airsoft arms. Revolving target with screw fixing All steel construction Size: 35mm pigeon and 45mm disc Designed for UK Sub 12 Ft Lb Airguns

Read more less

Crow Kill Zone 2 Point Target - GR8Fun This is a steel target, with 2 kill zones. Simple - shoot one zone to reset the other, no strings required. Kill zone is either a heart/lung or head shot. Powder coated in black with yellow strike plates, easy to see. These are metal parts, powder coated and thus will gain some marks during shipping and they ain't been painted by Picasso, they look good and work well. Designed to be shot at so you will need to repaint as you shoot the paint off. Sits on a metal plate approx 15cm deep, a big double T shape plate. Designed for Sub 12 FT LB Airguns 3.5mm Metal Plate Some home assembly / couple of bolts required. 29cm approx high 15cm approx wide

Read more less

.22 Crimped ( 6mm ) Blanks - Single Tub of 100 Flobert Victory Blanks IN STORE COLLECTION ONLY MUST BE OVER 18 YRS OLD IDEAL FOR USE IN SOME BLACK REVOLVERS AND BLANK TARGET HOLDERS FOR AIRGUNS

Read more less

Target Spinner + Target Holder - Snooker Set - GR8Fun This is a pole, with a triangle ground spike on the bottom, plus spinners and a paper target holder. Very popular at clubs and for home shooters. The paper target frame at the top, in our experience can be a little wonky as it has to stick up unsupported - but if you ignore that its a great target. 16cm is the width of the target holder - thus conventional 14cm targets will require you to add a bit of extra cardboard backing. Some home assembly is required and 13mm spanner will be needed ( not supplied ) Overall heigh approx 73cm Bit above the spike is 59cm  Suitable for rifles up to 12 FT Lbs. They also have a Red Spinner version which can be found here.  

Read more less

Perfecta Air Pistol Pellet Trap for CO2 Pistols and Sub 6ft Lbs Pistols Great BB / Pellet catcher, which the shooter can change the targets easily. Included is the two spinners and two ducks, which can be swapped on the pole that easily inserts into the target.  Thus you can shoot spinners or paper using the same target. Pellet Trap for pistols and revolvers - Sub 6ft Lb Ideally suited for pistol and BB. plinking 4 metal targets - 2 ducks and 2 pendulums INTERCHANGEABLE (diameter - 35 mm) 10 paper targets 17 x 17 cm Suitable for maximum 7,5 Joules Size 235mm x 175mm x 192mm Sub 12 Ft Lb air rifles will damage this target - thus its your error if you shoot it with something too powerful.

Read more less

HFT & Standard Double Post Spinner Airgun Target - GR8Fun   A simple steel spinning airgun target, an ideal air rifle target for HFT practice. 30mm and 20mm top discs, 25mm and 40mm bottom discs. Spike is 25cm high Target is 10cm wide Recommended for Sub 12 FT Lb Air Rifles.  

Read more less

Target Spinner + Target Holder - Red Set - GR8Fun This is a pole, with a triangle ground spike on the bottom, plus spinners and a paper target holder. Very popular at clubs and for home shooters. The paper target frame at the top, in our experience can be a little wonky as it has to stick up unsupported - but if you ignore that its a great target. 16cm is the width of the target holder - thus conventional 14cm targets will require you to add a bit of extra cardboard backing. Some home assembly is required and 13mm spanner will be needed ( not supplied ) Overall heigh approx 73cm Bit above the spike is 59cm  Suitable for rifles up to 12 FT Lbs. They also have a snooker version which can be found here.  

Read more less