FREE SHIPING ON ORDERS OVER £100

Airgun Grips - AR Fitment

If you're looking to change the feel of your airgun, then a new grip maybe the way forward. Be sure your pride and joy can accept an AR style fitment and one of these maybe the way to go.

If its not a standard AR fitment the product description will say.

Great products from well known brands, Ergo, Saber Tactical and Eaglevision.

28 products


  • Ergo Air Tactical Deluxe Grip - Suregrip - Black Ergo Air Tactical Deluxe Grip - Suregrip - Black

    Ergo Ergo Air Tactical Deluxe Grip - Suregrip - Black

    In stock

    Ergo Air Tactical Deluxe Grip - Suregrip - Black The ERGO Air Tactical Deluxe Grip features hand-filling palm swells for both left and right-handed shooters. The gripping surface consists of soft, textured SUREGRIP® for a comfortable & secure grip in any condition. Overmolded SUREGRIP® material with heavy texture provides non-slip grip Ambidextrous palm swells Ergonomically correct finger grooves Virtually impervious to oils and solvents Does not include a plug. TDX Plug can be purchased separately by clicking here This does have the two small rubber tips that will pull into the lower part of the trigger guard. This is a home install product, we are not responsible for any harm, injury air damage to any person or item when using or installing this product. Safety First. We recommend using the same bolt that you remove from your existing grip. You will require a long Alan key which is not supplied - the bolts are normally 5mm.  If you own a Daystate or a Brocock rifle this will not fit. You will need to contact Daystate or Brocock and ask for a grip made only to fit their rifles. If they state an AR grip will fit....it won't.

    In stock

    £39.99

  • Saber Tactical - AR Style Grip with Ambidextrous Thumb Rest Saber Tactical - AR Style Grip with Ambidextrous Thumb Rest On Gun

    Saber Tactical Saber Tactical - AR Style Grip with Ambidextrous Thumb Rest - FX Impact

    In stock

    Saber Tactical - AR Style Grip with Ambidextrous Thumb Rest  FX Impact M3 + MK2 Airgun 101 is proud to offer some of the ultimate accessories for FX Airguns. For competitive shooters who do not like to wrap your thumb around the grip, this grip has a thumb rest that can be positioned on either side. You can also adjust the angle to your preference. Note* The first shipment of grips are compatible with FX Impacts M3 and MK2       ( Not MK1 ) and most AR style grips. We've found that the FX Maverick has a thicker adapter and will not be compatible. We mark the first batch with a Yellow round sticker on the package. From our tests - the Bag rider will not fit when using this grip. Features: 6061 T6 aluminum Black anodized Skeletonize to reduce weight Ambidextrous thumb rest Weighs 6.0 oz This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £69.99

  • Ergo Air Tactical Deluxe Flat Top Grip - Suregrip - Black Ergo Air Tactical Deluxe Flat Top Grip - Suregrip - Black

    Ergo Ergo Air Tactical Deluxe Flat Top Grip - Suregrip - Black

    In stock

    Ergo Air Tactical Deluxe Flat Top Grip - Suregrip - Black Features hand filling palm swells for both left and right handed shooters. The gripping surface consists of soft, textured SUREGRIP for a comfortable & secure grip in any condition. Overmolded SUREGRIP® material with heavy texture provides non-slip grip Ambidextrous palm swells Ergonomically correct finger grooves Virtually impervious to oils and solvents Does not include a plug. A Tactical Deluxe plug can be purchased by clicking here. This does have the two small rubber tips that will pull into the lower part of the trigger guard. This is a home install product, we are not responsible for any harm, injury air damage to any person or item when using or installing this product. Safety First. We recommend using the same bolt that you remove from your existing grip. You will require a long Alan key which is not supplied - the bolts are normally 5mm.  If you own a Daystate or a Brocock rifle this will not fit. You will need to contact Daystate or Brocock and ask for a grip made only to fit their rifles. If they state an AR grip will fit....it won't.

    In stock

    £39.99

  • Ergo Tactical Deluxe Grip with Palm Shelf - Suregrip

    Ergo Ergo Tactical Deluxe Grip with Palm Shelf - Suregrip

    In stock

    Ergo Tactical Deluxe Grip with Palm Shelf - Suregrip - Black The Tactical Deluxe with Palm Shelf grip excels on precision airguns. Ambidextrous palm swells fill your hand for a comfortable grip. The addition of an adjustable palm shelf helps to support your firing hand. Overmolded SUREGRIP® material with heavy texture for a secure and comfortable grip. For best installation, we suggest using the 3/16 Wrench Overmolded SUREGRIP® material with heavy texture ERGO Air SUREGRIP® rubber texture Ambidextrous palm swell Adjustable palm shelf Virtually impervious to oils and solvents Does not include a plug & is not compatible with any plugs FAQ – The Palm Shelf cannot be added to the 4045 and cannot be purchased separately. This is a home install product, we are not responsible for any harm, injury air damage to any person or item when using or installing this product. Safety First. We recommend using the same bolt that you remove from your existing grip. You will require a long Alan key which is not supplied - the bolts are normally 5mm.  If you own a Daystate or a Brocock rifle this will not fit. You will need to contact Daystate or Brocock and ask for a grip made only to fit their rifles. If they state an AR grip will fit....it won't.

    In stock

    £54.99

  • Ergo Air Tactical Deluxe Grip - Suregrip - Green Ergo Air Tactical Deluxe Grip - Suregrip - Green

    Ergo Ergo Air Tactical Deluxe Grip - Suregrip - Green

    In stock

    Ergo Air Tactical Deluxe Grip - Suregrip - Green The ERGO Air Tactical Deluxe Grip features hand-filling palm swells for both left and right-handed shooters. The gripping surface consists of soft, textured SUREGRIP® for a comfortable & secure grip in any condition. Overmolded SUREGRIP® material with heavy texture provides non-slip grip Ambidextrous palm swells Ergonomically correct finger grooves Virtually impervious to oils and solvents Does not include a plug. TDX Plug can be purchased separately by clicking here This does have the two small rubber tips that will pull into the lower part of the trigger guard. This is a home install product, we are not responsible for any harm, injury air damage to any person or item when using or installing this product. Safety First. We recommend using the same bolt that you remove from your existing grip. You will require a long Alan key which is not supplied - the bolts are normally 5mm.  If you own a Daystate or a Brocock rifle this will not fit. You will need to contact Daystate or Brocock and ask for a grip made only to fit their rifles. If they state an AR grip will fit....it won't.

    In stock

    £39.99

  • Ergo Air Tactical Deluxe Grip - Suregrip - Flat Dark Earth Ergo Air Tactical Deluxe Grip - Suregrip - Flat Dark Earth

    Ergo Ergo Air Tactical Deluxe Grip - Suregrip - Flat Dark Earth

    In stock

    Ergo Air Tactical Deluxe Grip - Suregrip - Flat Dark Earth The ERGO Air Tactical Deluxe Grip features hand-filling palm swells for both left and right-handed shooters. The gripping surface consists of soft, textured SUREGRIP® for a comfortable & secure grip in any condition. Overmolded SUREGRIP® material with heavy texture provides non-slip grip Ambidextrous palm swells Ergonomically correct finger grooves Virtually impervious to oils and solvents Does not include a plug. TDX Plug can be purchased separately by clicking here This does have the two small rubber tips that will pull into the lower part of the trigger guard. This is a home install product, we are not responsible for any harm, injury air damage to any person or item when using or installing this product. Safety First. We recommend using the same bolt that you remove from your existing grip. You will require a long Alan key which is not supplied - the bolts are normally 5mm. 

    In stock

    £39.99

  • Ergo Air Flat Top - Suregrip - Black

    Ergo Ergo Air Flat Top - Suregrip - Black

    In stock

    Ergo Air Flat Top - Suregrip - Black Ergonomically correct finger grooves on soft, ERGO Air SUREGRIP give this Flat Top Grip the perfect feel in hand. Heavily textured for a secure grip grip even with wet hands. Ergonomically correct finger grooves Overmolded SUREGRIP® material provides non-slip grip Virtually impervious to oils and solvents ERGO AIR GRIP PLUG (A2 size) fits this grip (sold separately) This is a home install product, we are not responsible for any harm, injury air damage to any person or item when using or installing this product. Safety First. We recommend using the same bolt that you remove from your existing grip. You will require a long Alan key which is not supplied - the bolts are normally 5mm.  If you own a Daystate or a Brocock rifle this will not fit. You will need to contact Daystate or Brocock and ask for a grip made only to fit their rifles. If they state an AR grip will fit....it won't.

    In stock

    £26.99

  • Ergo Air Grip Plug - PLUG ONLY

    Ergo Ergo Air Grip Plug - PLUG ONLY

    In stock

    Ergo Air Grip Plug - PLUG ONLY - Black Designed to plug the cavity on the bottom of FLAT TOP SUREGRIP®, this press fit plug is secured by friction. The plug prevents debris from lodging in the cavity of the grip and functions as a shock absorbing pad to protect the grip when setting the airgun down on hard surfaces. This plug only fits the FLAT TOP SUREGRIP®

    In stock

    £6.99

  • Saber Tactical - Ambidextrous Thumb Rest Saber Tactical - Ambidextrous Thumb Rest 2

    Saber Tactical Saber Tactical - Ambidextrous Thumb Rest

    In stock

    Saber Tactical - Ambidextrous Thumb Rest Airgun 101 is proud to offer some of the ultimate accessories. The Saber Tactical Ambidextrous Thumb Rest for the Saber Grips is a must-have accessory for airgun enthusiasts looking to enhance their shooting experience. This thumb rest is designed with both left- and right-handed shooters in mind, offering a comfortable and secure thumb placement for improved accuracy and control. Constructed from high-quality materials, the rest fits snugly and securely onto the Saber Grips, providing a custom fit that enhances stability and accuracy. Whether you're an experienced airgun shooter or just starting out, the Saber Tactical Ambidextrous Thumb Rest is a valuable addition to your gear and is suitable for use with a wide range of airguns. The thumb rest requires the Saber Tactical Grip - SOLD SEPARATELY - Click Here This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £9.99

  • Sale -£5.00 FX Dreamline / Impact Grip - Laminate - Blue - RH - Form Rifle Stocks FX Dreamline / Impact Grip - Laminate - Blue - RH - Form Rifle Stocks

    Form Rifle Stocks Form Rifle Stocks - FX Dreamline / Impact Grip - Laminate - Blue / Black - RH

    In stock

    FX Dreamline / Impact Grip - Laminate - Blue / Black - RH This is the NON Beavertail version and will fit a Dreamline and Impact. It will also fit other AR style platforms. Form Rifle stocks are known for high quality wood work and some of the best laminate forms for rifles in the world. They bring the FX Dreamline / Impact Laminate grip to the Airgun World, super high quality with a finish second to none. Swap your existing FX Dreamline / Impact Grip. Simple and easy to swap, with just one Alan screw to make the change. Remove the existing grip using a 5mm Alan tool, and then simply replace with the new Form Grip, tighten the screw until secure, as with regular grips you do not need to over tighten or crush the grip. Weight Approx 3.8 oz Height Minus Beaver Tail 10" approx Height With Beaver Tail 12" approx Colours and graining will vary from the photographs, its laminate   Right Handed  Please note - if you have a Saber Tactical Bag Rider installed this will not fit. Airgun 101 is NOT responsible for any changes you make to your rifle or airgun. This is a home install piece of kit and will require you to remove the existing grip to fit this one. We are not responsible for any harm, damage or injury which occurs from fitting this item. Any item failure causing damage to any person, item or belonging is not the responsibility of Airgun 101 Shop or its parent company.  Any damage to the grip, rifle or any other item due to bad fitment is not the responsibility of Airgun 101 Shop. We do not ship this product outside of England, Scotland, Wales - due to customs restrictions - we can try, but if it gets stopped its your loss.

    In stock

    £130.00£125.00

  • Ergo Air Tactical Deluxe Grip - Suregrip - Purple

    Ergo Ergo Air Tactical Deluxe Grip - Suregrip - Purple

    In stock

    Ergo Air Tactical Deluxe Grip - Suregrip - Purple The ERGO Air Tactical Deluxe Grip features hand-filling palm swells for both left and right-handed shooters. The gripping surface consists of soft, textured SUREGRIP® for a comfortable & secure grip in any condition. Overmolded SUREGRIP® material with heavy texture provides non-slip grip Ambidextrous palm swells Ergonomically correct finger grooves Virtually impervious to oils and solvents Does not include a plug. TDX Plug can be purchased separately by clicking here This does have the two small rubber tips that will pull into the lower part of the trigger guard. The Optional TDX plug is only available in black. This is a home install product, we are not responsible for any harm, injury air damage to any person or item when using or installing this product. Safety First. We recommend using the same bolt that you remove from your existing grip. You will require a long Alan key which is not supplied - the bolts are normally 5mm.  If you own a Daystate or a Brocock rifle this will not fit. You will need to contact Daystate or Brocock and ask for a grip made only to fit their rifles. If they state an AR grip will fit....it won't.

    In stock

    £39.99

  • Sale -£5.00 Form Rifle Stocks - FX Dreamline / Impact Grip - Laminate - Forest - RH Non Beavertail Form Rifle Stocks - FX Dreamline / Impact Grip - Laminate - Forest - RH Non Beavertail 2

    Form Rifle Stocks Form Rifle Stocks - FX Dreamline / Impact Grip - Laminate - Forest - RH

    In stock

    FX Dreamline / Impact Grip - Laminate - Forest - RH - Form Rifle Stocks This is the NON Beavertail version and will fit a Dreamline and Impact. It will also fit other AR style platforms. Form Rifle stocks are known for high quality wood work and some of the best laminate forms for rifles in the world. They bring the FX Dreamline / Impact Laminate grip to the Airgun World, super high quality with a finish second to none. Swap your existing FX Dreamline / Impact Grip. Simple and easy to swap, with just one Alan screw to make the change. Remove the existing grip using a 5mm Alan tool, and then simply replace with the new Form Grip, tighten the screw until secure, as with regular grips you do not need to over tighten or crush the grip. Weight Approx 3.8 oz Height Minus Beaver Tail 10" approx Height With Beaver Tail 12" approx Colours and graining will vary from the photographs, its laminate   Right Handed  Please note - if you have a Saber Tactical Bag Rider installed this will not fit. Airgun 101 is NOT responsible for any changes you make to your rifle or airgun. This is a home install piece of kit and will require you to remove the existing grip to fit this one. We are not responsible for any harm, damage or injury which occurs from fitting this item. Any item failure causing damage to any person, item or belonging is not the responsibility of Airgun 101 Shop or its parent company.  Any damage to the grip, rifle or any other item due to bad fitment is not the responsibility of Airgun 101 Shop. We do not ship this product outside of England, Scotland, Wales - due to customs restrictions - we can try, but if it gets stopped its your loss.

    In stock

    £130.00£125.00

  • Form Rifle Stocks - FX Impact Grip Beavertail - Laminate - Forest - RH 2 Form Rifle Stocks - FX Impact Grip Beavertail - Laminate - Forest - RH

    Form Rifle Stocks Form Rifle Stocks - FX Impact Grip Beavertail - Laminate - Forest - RH

    In stock

    FX Impact Grip Beavertail - Laminate - Forest - RH This is the updated Form Grip, we have worked with Form to create a dedicated FX Impact grip. Form Rifle stocks are known for high quality wood work and some of the best laminate forms for rifles in the world. They bring the FX Impact Laminate grip to the Airgun World, super high quality with a finish second to none. Swap your existing FX Impact Grip. We do advise that the Beavertail aligns with the FX Impact and still some AR style rifles, it does not fit in our opinion the Dreamline range of rifles, we would suggest the NON Beavertail style grip which is also available. Simple and easy to swap, with just one Alan screw to make the change. Remove the existing grip using a 5mm Alan tool, and then simply replace with the new Form Grip, tighten the screw until secure, as with regular grips you do not need to over tighten or crush the grip. Weight Approx 3.8 oz Height Minus Beaver Tail 10" approx Height With Beaver Tail 12" approx Colours and graining will vary from the photographs, its laminate   Right Handed  Please note - if you have a Saber Tactical Bag Rider installed this will not fit. Airgun 101 is NOT responsible for any changes you make to your rifle or airgun. This is a home install piece of kit and will require you to remove the existing grip to fit this one. We are not responsible for any harm, damage or injury which occurs from fitting this item. Any item failure causing damage to any person, item or belonging is not the responsibility of Airgun 101 Shop or its parent company.  Any damage to the grip, rifle or any other item due to bad fitment is not the responsibility of Airgun 101 Shop. We do not ship this product outside of England, Scotland, Wales - due to customs restrictions - we can try, but if it gets stopped its your loss.

    In stock

    £129.99

  • Eagle Vision - EVG-13 AR Style Grip - FX Impact MK1 - Daystate Delta Wolf Eagle Vision - EVG-13 AR Style Grip - FX Impact MK1 - Daystate Delta Wolf on rifle

    Eagle Vision Eagle Vision - EVG-13 AR Style Grip - FX Impact MK1 - Daystate Delta Wolf

    In stock

    Eagle Vision - EVG-13 AR Style Grip - FX Impact MK1 - Daystate Delta Wolf The AR-15 style grip is Made by CNC machined from a solid 6061-T6 billet aluminium. Compatible With FX Impact MK1 - NOT MK2 or MK3 Daystate Delta Wolf  Specification: Weight 185gm 6061 Aluminum Anodized BLACK 3X M4 threads hole on each side for Thumb Rest  included: 1x AR GRIP 1X Long Alen key 5mm 1X Waterproof case 

    In stock

    £83.98

  • FX Impact Grip Beavertail - Laminate - Red / Black - RH - Form Rifle Stocks FX Impact Grip Beavertail - Laminate - Red / Black - RH - Form Rifle Stocks

    Form Rifle Stocks Form Rifle Stocks - FX Impact Grip Beavertail - Laminate - Red / Black - RH

    In stock

    FX Impact Grip Beavertail - Laminate - Red / Black - RH This is the updated Form Grip, we have worked with Form to create a dedicated FX Impact grip. Form Rifle stocks are known for high quality wood work and some of the best laminate forms for rifles in the world. They bring the FX Impact Laminate grip to the Airgun World, super high quality with a finish second to none. Swap your existing FX Impact Grip. We do advise that the Beavertail aligns with the FX Impact and still some AR style rifles, it does not fit in our opinion the Dreamline range of rifles, we would suggest the NON Beavertail style grip which is also available. Simple and easy to swap, with just one Alan screw to make the change. Remove the existing grip using a 5mm Alan tool, and then simply replace with the new Form Grip, tighten the screw until secure, as with regular grips you do not need to over tighten or crush the grip. Weight Approx 3.8 oz Height Minus Beaver Tail 10" approx Height With Beaver Tail 12" approx Colours and graining will vary from the photographs, its laminate   Right Handed  Please note - if you have a Saber Tactical Bag Rider installed this will not fit. Airgun 101 is NOT responsible for any changes you make to your rifle or airgun. This is a home install piece of kit and will require you to remove the existing grip to fit this one. We are not responsible for any harm, damage or injury which occurs from fitting this item. Any item failure causing damage to any person, item or belonging is not the responsibility of Airgun 101 Shop or its parent company.  Any damage to the grip, rifle or any other item due to bad fitment is not the responsibility of Airgun 101 Shop. We do not ship this product outside of England, Scotland, Wales - due to customs restrictions - we can try, but if it gets stopped its your loss.

    In stock

    £129.99

  • Eagle Vision - EVG-14 AR Style Grip - FX & Edgun Leshiy 2 Eagle Vision - EVG-14 AR Style Grip - FX & Edgun Leshiy 2 rear

    Eagle Vision Eagle Vision - EVG-14 AR Style Grip - FX & Edgun Leshiy 2

    In stock

    Eagle Vision - EVG-14 AR Style Grip - FX & Edgun Leshiy 2 The AR-15 style grip is Made by CNC machined from a solid 6061-T6 billet aluminium. Compatible With: Edgun Leshiy 2 FX Impact MK2 MK3  FX PANTHERA FX PANTHERA HUNTER  FX Dreamline FX DYNAMIC FX Maverick Specification: Weight 128gm 6061 Aluminum Anodized BLACK 3X M4 threads hole on each side for Thumb Rest  included: 1x AR GRIP 1X Long Alen key 5mm 1X Waterproof case  Not supplied with the grip screw.

    In stock

    £71.98

  • Eagle Vision - EVG-15 AR Style Grip - FX Impact MK1 - Daystate Delta Wolf Eagle Vision - EVG-15 AR Style Grip - FX Impact MK1 - Daystate Delta Wolf right side

    Eagle Vision Eagle Vision - EVG-15 AR Style Grip - FX Impact MK1 - Daystate Delta Wolf

    In stock

    Eagle Vision - EVG-15 AR Style Grip - FX Impact MK1 - Daystate Delta Wolf The AR-15 style grip is Made by CNC machined from a solid 6061-T6 billet aluminium. Compatible With FX Impact MK1 - NOT MK2 or MK3 Daystate Delta Wolf  Specification: Weight 138gm 6061 Aluminum Anodized BLACK 3X M4 threads hole on each side for Thumb Rest  included: 1x AR GRIP 1X Long Alen key 5mm 1X Waterproof case  Not supplied with the grip screw.

    In stock

    £83.98

  • Eagle Vision - EVG-11 AR Style Grip - FX Impact MK1 - Daystate Delta Wolf Eagle Vision - EVG-11 AR Style Grip - FX Impact MK1 - Daystate Delta Wolf front angle

    Eagle Vision Eagle Vision - EVG-11 AR Style Grip - FX Impact MK1 - Daystate Delta Wolf

    In stock

    Eagle Vision - EVG-11 AR Style Grip - FX Impact MK1 - Daystate Delta Wolf The AR-15 style grip is Made by CNC machined from a solid 6061-T6 billet aluminium. Compatible With FX Impact MK1 - NOT MK2 or MK3 Daystate Delta Wolf  Specification: Weight 185gm 6061 Aluminum Anodized BLACK 3X M4 threads hole on each side for Thumb Rest  included: 1x AR GRIP 1X Long Alen key 5mm 1X Waterproof case 

    In stock

    £83.98

  • Ergo Air Tactical Deluxe Zero Angle Flat Top Grip - Suregrip

    Ergo Ergo Air Tactical Deluxe Zero Angle Flat Top Grip - Suregrip

    Out of stock

    Ergo Air Tactical Deluxe Zero Angle Flat Top Grip - Suregrip Features hand filling palm swells for both left and right handed shooters. The gripping surface consists of soft, textured SUREGRIP for a comfortable & secure grip in any condition. Zero angle puts your hand in a better posture for modern shooting positions. Overmolded SUREGRIP® material with heavy texture provides non-slip grip Ambidextrous palm swells Ergonomically correct finger grooves Virtually impervious to oils and solvents Does not include a plug. Purchase the ERGO AIR TDX-0 GRIP PLUG for your grip. This is a home install product, we are not responsible for any harm, injury air damage to any person or item when using or installing this product. Safety First. We recommend using the same bolt that you remove from your existing grip. You will require a long Alan key which is not supplied - the bolts are normally 5mm.  If you own a Daystate or a Brocock rifle this will not fit. You will need to contact Daystate or Brocock and ask for a grip made only to fit their rifles. If they state an AR grip will fit....it won't.

    Out of stock

    £39.99

  • Ergo Air Tactical Deluxe Grip Plug - PLUG ONLY - Black Ergo Air Tactical Deluxe Grip Plug - PLUG ONLY - Black

    Ergo Ergo Air Tactical Deluxe Grip Plug - PLUG ONLY

    Out of stock

    Ergo Air Tactical Deluxe Grip Plug - PLUG ONLY - Black Designed to plug the cavity on the bottom of our Tactical Deluxe Flat Top Grip. Securely press fits into the bottom and helps prevent debris from lodging in the cavity of the grip. It also functions as a shock-absorbing pad to protect the grip when setting the rifle down on hard surfaces. NOT FOR THE ZERO ANGLE GRIPS - SEE BELOW This Plug Fits the Following Grips: ERGO AIR TACTICAL DELUXE FLAT TOP SUREGRIP® ERGO AIR TACTICAL DELUXE GRIP – SUREGRIP® - Green / Earth / Black

    Out of stock

    £6.99

  • Ergo Air Tactical Deluxe Zero Angle Grip - Suregrip - Black

    Ergo Ergo Air Tactical Deluxe Zero Angle Grip - Suregrip - Black

    Out of stock

    Ergo Air Tactical Deluxe Zero Angle Grip - Suregrip - Black Features hand-filling palm swells for both left and right-handed shooters. The gripping surface consists of soft, textured SUREGRIP for a comfortable & secure grip in any condition. Zero angle puts your hand in a better posture for modern shooting positions with a beavertail for added comfort. Overmolded SUREGRIP® material with heavy texture provides non-slip grip Ambidextrous palm swells Ergonomically correct finger grooves Virtually impervious to oils and solvents Plug sold separately – click here to purchase This is a home install product, we are not responsible for any harm, injury air damage to any person or item when using or installing this product. Safety First. We recommend using the same bolt that you remove from your existing grip. You will require a long Alan key which is not supplied - the bolts are normally 5mm.  If you own a Daystate or a Brocock rifle this will not fit. You will need to contact Daystate or Brocock and ask for a grip made only to fit their rifles. If they state an AR grip will fit....it won't.

    Out of stock

    £39.99

  • Saber Tactical - AR-Style Vertical Grip Saber Tactical - AR-Style Vertical Grip top

    Saber Tactical Saber Tactical - AR Style Vertical Grip - Black

    Out of stock

    Saber Tactical - AR Style Vertical Grip Colour Black Airgun 101 is proud to offer some of the ultimate accessories for Airguns. Introducing the Saber Tactical AR-Style Vertical Grip, designed to enhance your shooting experience with PCP airguns. This lightweight and durable grip is crafted from high-quality material and provides exceptional grip and control for precise and accurate shots. The ambidextrous thumb rest adds to the comfort and stability of the grip, allowing for a natural and secure shooting position. It's easy to install and compatible with most PCP airguns, with a low-profile design that ensures a sleek appearance while improving overall shooting performance. Upgrade your PCP airgun with the Saber Tactical AR-Style Vertical Grip and take your shooting experience to the next level with enhanced control, comfort, and accuracy. PRODUCT FEATURES: High-quality construction, 6061 T6 Aluminum Lightweight and durable Ambidextrous thumb rest for comfort and stability Easy to install Low-profile design for a sleek appearance Compatible with most PCP airguns that allow a chassis AR style fitment. - NOT Daystate, Edgun, Brocock This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    Out of stock

    £98.99

  • Sale -£5.00 FX Dreamline / Impact Grip - Laminate - Red / Black - RH FX Dreamline / Impact Grip - Laminate - Red / Black - RH

    Form Rifle Stocks Form Rifle Stocks - FX Dreamline / Impact Grip - Laminate - Red / Black - RH

    Out of stock

    FX Dreamline / Impact Grip - Laminate - Red / Black - RH - Form Rifle Stocks This is the NON Beavertail version and will fit a Dreamline and Impact. It will also fit other AR style platforms. Form Rifle stocks are known for high quality wood work and some of the best laminate forms for rifles in the world. They bring the FX Dreamline / Impact Laminate grip to the Airgun World, super high quality with a finish second to none. Swap your existing FX Dreamline / Impact Grip. Simple and easy to swap, with just one Alan screw to make the change. Remove the existing grip using a 5mm Alan tool, and then simply replace with the new Form Grip, tighten the screw until secure, as with regular grips you do not need to over tighten or crush the grip. Weight Approx 3.8 oz Height Minus Beaver Tail 10" approx Height With Beaver Tail 12" approx Colours and graining will vary from the photographs, its laminate   Right Handed  Please note - if you have a Saber Tactical Bag Rider installed this will not fit. Airgun 101 is NOT responsible for any changes you make to your rifle or airgun. This is a home install piece of kit and will require you to remove the existing grip to fit this one. We are not responsible for any harm, damage or injury which occurs from fitting this item. Any item failure causing damage to any person, item or belonging is not the responsibility of Airgun 101 Shop or its parent company.  Any damage to the grip, rifle or any other item due to bad fitment is not the responsibility of Airgun 101 Shop. We do not ship this product outside of England, Scotland, Wales - due to customs restrictions - we can try, but if it gets stopped its your loss.

    Out of stock

    £130.00£125.00

  • FX Impact Grip Beavertail - Laminate - Blue / Black- RH - Form Rifle Stocks FX Impact Grip Beavertail - Laminate - Blue / Black- RH - Form Rifle Stocks

    Form Rifle Stocks Form Rifle Stocks - FX Impact Grip Beavertail - Laminate - Blue / Black- RH

    Out of stock

    FX Impact Grip Beavertail - Laminate - Blue / Black- RH This is the updated Form Grip, we have worked with Form to create a dedicated FX Impact grip. Form Rifle stocks are known for high quality wood work and some of the best laminate forms for rifles in the world. They bring the FX Impact Laminate grip to the Airgun World, super high quality with a finish second to none. Swap your existing FX Impact Grip. We do advise that the Beavertail aligns with the FX Impact and still some AR style rifles, it does not fit in our opinion the Dreamline range of rifles, we would suggest the NON Beavertail style grip which is also available. Simple and easy to swap, with just one Alan screw to make the change. Remove the existing grip using a 5mm Alan tool, and then simply replace with the new Form Grip, tighten the screw until secure, as with regular grips you do not need to over tighten or crush the grip. Weight Approx 3.8 oz Height Minus Beaver Tail 10" approx Height With Beaver Tail 12" approx Colours and graining will vary from the photographs, its laminate   Right Handed  Please note - if you have a Saber Tactical Bag Rider installed this will not fit. Airgun 101 is NOT responsible for any changes you make to your rifle or airgun. This is a home install piece of kit and will require you to remove the existing grip to fit this one. We are not responsible for any harm, damage or injury which occurs from fitting this item. Any item failure causing damage to any person, item or belonging is not the responsibility of Airgun 101 Shop or its parent company.  Any damage to the grip, rifle or any other item due to bad fitment is not the responsibility of Airgun 101 Shop. We do not ship this product outside of England, Scotland, Wales - due to customs restrictions - we can try, but if it gets stopped its your loss.

    Out of stock

    £129.99

  • Form Rifle Stocks - FX Impact Grip Beavertail - Laminate - Black - RH Form Rifle Stocks - FX Impact Grip Beavertail - Laminate - Black - RH

    Form Rifle Stocks Form Rifle Stocks - FX Impact Grip Beavertail - Laminate - Black - RH

    Out of stock

    FX Impact Grip Beavertail - Laminate - Black - RH This is the updated Form Grip, we have worked with Form to create a dedicated FX Impact grip. Form Rifle stocks are known for high quality wood work and some of the best laminate forms for rifles in the world. They bring the FX Impact Laminate grip to the Airgun World, super high quality with a finish second to none. Swap your existing FX Impact Grip. We do advise that the Beavertail aligns with the FX Impact and still some AR style rifles, it does not fit in our opinion the Dreamline range of rifles, we would suggest the NON Beavertail style grip which is also available. Simple and easy to swap, with just one Alan screw to make the change. Remove the existing grip using a 5mm Alan tool, and then simply replace with the new Form Grip, tighten the screw until secure, as with regular grips you do not need to over tighten or crush the grip. Weight Approx 3.8 oz Height Minus Beaver Tail 10" approx Height With Beaver Tail 12" approx Colours and graining will vary from the photographs, its laminate   Right Handed  Please note - if you have a Saber Tactical Bag Rider installed this will not fit. Airgun 101 is NOT responsible for any changes you make to your rifle or airgun. This is a home install piece of kit and will require you to remove the existing grip to fit this one. We are not responsible for any harm, damage or injury which occurs from fitting this item. Any item failure causing damage to any person, item or belonging is not the responsibility of Airgun 101 Shop or its parent company.  Any damage to the grip, rifle or any other item due to bad fitment is not the responsibility of Airgun 101 Shop. We do not ship this product outside of England, Scotland, Wales - due to customs restrictions - we can try, but if it gets stopped its your loss.

    Out of stock

    £129.99

  • Delta Wolf - Ergo Air Tactical Deluxe Grip - Suregrip - Black

    Ergo Delta Wolf - Ergo Air Tactical Deluxe Grip - Suregrip - Black

    Out of stock

    Delta Wolf - Ergo Air Tactical Deluxe Grip - Suregrip - Black Specifically made for the Daystate Delta Wolf. The ERGO Air Tactical Deluxe Grip features hand-filling palm swells for both left and right-handed shooters. The gripping surface consists of soft, textured SUREGRIP® for a comfortable & secure grip in any condition. Overmolded SUREGRIP® material with heavy texture provides non-slip grip Ambidextrous palm swells Ergonomically correct finger grooves Virtually impervious to oils and solvents Does not include a plug. TDX Plug can be purchased separately by clicking here This does have the two small rubber tips that will pull into the lower part of the trigger guard. This is a home install product, we are not responsible for any harm, injury air damage to any person or item when using or installing this product. Safety First. We recommend using the same bolt that you remove from your existing grip. You will require a long Alan key which is not supplied - the bolts are normally 5mm. 

    Out of stock

    £39.99

  • Sale -£5.00 FX Dreamline / Impact Grip - Laminate - Black - RH - Form Rifle Stocks FX Dreamline / Impact Grip - Laminate - Black - RH - Form Rifle Stocks

    Form Rifle Stocks Form Rifle Stocks - FX Dreamline / Impact Grip - Laminate - Black - RH

    Out of stock

    FX Dreamline / Impact Grip - Laminate - Black - RH This is the NON Beavertail version and will fit a Dreamline and Impact. It will also fit other AR style platforms. Form Rifle stocks are known for high quality wood work and some of the best laminate forms for rifles in the world. They bring the FX Dreamline / Impact Laminate grip to the Airgun World, super high quality with a finish second to none. Swap your existing FX Dreamline / Impact Grip. Simple and easy to swap, with just one Alan screw to make the change. Remove the existing grip using a 5mm Alan tool, and then simply replace with the new Form Grip, tighten the screw until secure, as with regular grips you do not need to over tighten or crush the grip. Weight Approx 3.8 oz Height Minus Beaver Tail 10" approx Height With Beaver Tail 12" approx Colours and graining will vary from the photographs, its laminate   Right Handed  Please note - if you have a Saber Tactical Bag Rider installed this will not fit. Airgun 101 is NOT responsible for any changes you make to your rifle or airgun. This is a home install piece of kit and will require you to remove the existing grip to fit this one. We are not responsible for any harm, damage or injury which occurs from fitting this item. Any item failure causing damage to any person, item or belonging is not the responsibility of Airgun 101 Shop or its parent company.  Any damage to the grip, rifle or any other item due to bad fitment is not the responsibility of Airgun 101 Shop. We do not ship this product outside of England, Scotland, Wales - due to customs restrictions - we can try, but if it gets stopped its your loss.

    Out of stock

    £130.00£125.00

  • FX Dreamline / Impact Grip - Laminate - Walnut - RH - Form Rifle Stocks FX Dreamline / Impact Grip - Laminate - Walnut - RH - Form Rifle Stocks

    Form Rifle Stocks FX Dreamline / Impact Grip - Laminate - Walnut - RH - Form Rifle Stocks

    Out of stock

    FX Dreamline / Impact Grip - Laminate - Walnut - RH This is a Walnut stained laminate and not a Walnut grip. This is the NON Beavertail version and will fit a Dreamline and Impact. It will also fit other AR style platforms. Form Rifle stocks are known for high quality wood work and some of the best laminate forms for rifles in the world. They bring the FX Dreamline / Impact Laminate grip to the Airgun World, super high quality with a finish second to none. Swap your existing FX Dreamline / Impact Grip. Simple and easy to swap, with just one Alan screw to make the change. Remove the existing grip using a 5mm Alan tool, and then simply replace with the new Form Grip, tighten the screw until secure, as with regular grips you do not need to over tighten or crush the grip. Weight Approx 3.8 oz Height Minus Beaver Tail 10" approx Height With Beaver Tail 12" approx Colours and graining will vary from the photographs, its laminate   Right Handed  Please note - if you have a Saber Tactical Bag Rider installed this will not fit. Airgun 101 is NOT responsible for any changes you make to your rifle or airgun. This is a home install piece of kit and will require you to remove the existing grip to fit this one. We are not responsible for any harm, damage or injury which occurs from fitting this item. Any item failure causing damage to any person, item or belonging is not the responsibility of Airgun 101 Shop or its parent company.  Any damage to the grip, rifle or any other item due to bad fitment is not the responsibility of Airgun 101 Shop. We do not ship this product outside of England, Scotland, Wales - due to customs restrictions - we can try, but if it gets stopped its your loss.

    Out of stock

    £125.00

© 2024 Airgun101 Shop,

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Union Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account