FREE SHIPING ON ORDERS OVER £100

GR8fun Targets

7 products


  • Bottle Target Blanks Holder - GR8Fun

    GR8Fun Bottle Target Blanks Holder - GR8Fun

    In stock

    Bottle Target Blanks Holder - GR8Fun This is a steel target, designed for Sub 12 FT LB airguns, and it brings a huge smile to the shooter. Load the holes with .22 crimped blanks, and then be super accurate with your shooting, and when you are the bang is the reward. .22 Crimped blanks can be bought by anyone over 18 yrs from your local Gun Store - usually in packs of 100 for under £10 - thats a lot of bang for your buck, much better value than single shot exploding targets. This target holder ships WITHOUT blanks, you need to purchase them from your local gun store, they should not be purchased through the post - Royal Mail banned item. 3.5mm Metal Plate 5.5mm approx target holes Some home assembly / couple of bolts required. When loaded this will go bang, so best used where it won't annoy the neighbours.

    In stock

    £21.99

  • Dove / Pigeon Kill Zone 2 Point Target - GR8Fun

    GR8Fun Dove / Pigeon Kill Zone 2 Point Target - GR8Fun

    In stock

    Dove/Pigeon Kill Zone 2 Point Target - GR8Fun This is a steel target, with 2 kill zones. Simple - shoot one zone to reset the other, no strings required. Kill zone is either a heart/lung or head shot. Powder coated in black with yellow strike plates, easy to see. These are metal parts, powder coated and thus will gain some marks during shipping and they ain't been painted by Picasso, they look good and work well. Designed to be shot at so you will need to repaint as you shoot the paint off. Sits on a metal plate approx 15cm deep, a big double T shape plate. Designed for Sub 12 FT LB Airguns 3.5mm Metal Plate Some home assembly / couple of bolts required. 27cm approx diagonal width 15cm approx wide

    In stock

    £27.99

  • Crow Kill Zone 2 Point Target - GR8Fun

    GR8Fun Crow Kill Zone 2 Point Target - GR8Fun

    In stock

    Crow Kill Zone 2 Point Target - GR8Fun This is a steel target, with 2 kill zones. Simple - shoot one zone to reset the other, no strings required. Kill zone is either a heart/lung or head shot. Powder coated in black with yellow strike plates, easy to see. These are metal parts, powder coated and thus will gain some marks during shipping and they ain't been painted by Picasso, they look good and work well. Designed to be shot at so you will need to repaint as you shoot the paint off. Sits on a metal plate approx 15cm deep, a big double T shape plate. Designed for Sub 12 FT LB Airguns 3.5mm Metal Plate Some home assembly / couple of bolts required. 29cm approx high 15cm approx wide

    In stock

    £27.99

  • Target Spinner + Target Holder - Snooker Set - GR8Fun

    GR8Fun Target Spinner + Target Holder - Snooker Set - GR8Fun

    In stock

    Target Spinner + Target Holder - Snooker Set - GR8Fun This is a pole, with a triangle ground spike on the bottom, plus spinners and a paper target holder. Very popular at clubs and for home shooters. The paper target frame at the top, in our experience can be a little wonky as it has to stick up unsupported - but if you ignore that its a great target. 16cm is the width of the target holder - thus conventional 14cm targets will require you to add a bit of extra cardboard backing. Some home assembly is required and 13mm spanner will be needed ( not supplied ) Overall heigh approx 73cm Bit above the spike is 59cm  Suitable for rifles up to 12 FT Lbs. They also have a Red Spinner version which can be found here.  

    In stock

    £46.99

  • Sale -£0.51 HFT & Standard Double Post Spinner Airgun Target - GR8Fun HFT & Standard Double Post Spinner Airgun Target - GR8Fun In Grass

    GR8Fun HFT & Standard Double Post Spinner Airgun Target - GR8Fun

    In stock

    HFT & Standard Double Post Spinner Airgun Target - GR8Fun   A simple steel spinning airgun target, an ideal air rifle target for HFT practice. 30mm and 20mm top discs, 25mm and 40mm bottom discs. Spike is 25cm high Target is 10cm wide Recommended for Sub 12 FT Lb Air Rifles.  

    In stock

    £16.00£15.49

  • Target Spinner + Target Holder - Red Set - GR8Fun

    GR8Fun Target Spinner + Target Holder - Red Set - GR8Fun

    In stock

    Target Spinner + Target Holder - Red Set - GR8Fun This is a pole, with a triangle ground spike on the bottom, plus spinners and a paper target holder. Very popular at clubs and for home shooters. The paper target frame at the top, in our experience can be a little wonky as it has to stick up unsupported - but if you ignore that its a great target. 16cm is the width of the target holder - thus conventional 14cm targets will require you to add a bit of extra cardboard backing. Some home assembly is required and 13mm spanner will be needed ( not supplied ) Overall heigh approx 73cm Bit above the spike is 59cm  Suitable for rifles up to 12 FT Lbs. They also have a snooker version which can be found here.  

    In stock

    £46.99

  • Cone Steel Target Airgun Pellet Catcher 14cm x 14cm Cone Steel Target Airgun Pellet Catcher 14cm x 14cm

    Jack Pyke Cone Steel Target Airgun Pellet Catcher 14cm x 14cm

    Out of stock

    Cone Steel Target Airgun Pellet Catcher 14cm x 14cm Includes 10 paper targets Paper target size 14cm x 14cm These are shipped in a single ply cardboard box from the manufacturer , due to the product shape, design, edges and lines....the cardboard boxes are not perfect...product is fine. Designed for UK Sub 12 Ft Lb Airguns.

    Out of stock

    £11.99

© 2024 Airgun101 Shop,

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Union Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account