FREE SHIPING ON ORDERS OVER £100

Saber Tactical

Saber Tactical Inc makes the best accessories for your FX Impact, FX Maverick, FX King and many other models. From Picatinny rails to Mono Pods, grips, adapters and convertors. The Saber teams consists of Donny Du, Val and Thayne Simmons. With a common interest in innovation and design, we form this company to offer the airgun community a variety of accessories as well as assist entrepreneurs and small businesses with their production needs.

70 products


  • Sale -£10.00 Saber Tactical - 34mm Bottle Clamp - Picatinny Rail Adapter Saber Tactical - 34mm Bottle Clamp - Picatinny Rail Adapter

    Saber Tactical Saber Tactical - 34mm Bottle Clamp - Picatinny Rail Adapter

    In stock

    Saber Tactical - 34mm Bottle Clamp - Picatinny Rail Adapter If you're uneasy about drilling into your factory gun stock, this 34mm cylinder clamp is easy to attach. Has rubber pads on the inside to prevent any marring to your cylinder. This clamp has picatinny rails at the bottom for you to connect your preferred picatinny accessories. Features: 6061 T6 aluminum Matte black anodize  Compatible with: FX Wildcat Long Cylinder Version FX Dreamlime "Tube" FX Streamline Taipan Veteran Benjamin Marauder This product clamps onto the outside of a high pressure cylinder on an airgun - we accept no responsibility for any damage to any product or any harm toany individual - this is used ENTIRLEY at your own risk. Do not remove the rubber pads and use.Use as an adapter for attaching a Bipod - DO NOT attach a sling, shoulder strap or use it in any way to carry anything.This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £69.99£59.99

  • Saber Tactical - US Flag T-Shirt - Special Edition Saber Tactical - US Flag T-Shirt - Special Edition

    Saber Tactical Saber Tactical - US Flag T-Shirt - Special Edition

    In stock

    Saber Tactical - US Flag T-Shirt  Special Edition GET THE LATEST SABER TACTICAL T'ss Available for the first time direct in the UK. Features: 100% cotton Size Guide - In INCHES  SIZE IN INCHES S M L XL 2XL 3XL Body Length at Back 27 28 30 31 32 32 Chest Width 16 18 21 22 23 24 BODY LENGTH AT BACK Measured from high point shoulder to finished hem at the back CHEST WIDTH Measured across the chest one inch below the armhole when laid flat International Shipping If you do NOT see your country listed on checkout, please email us and we will happily provide you a quote. We do recommend you always select tracked postage, we are not liable for any loss in items sent worldwide if you choose cheap uninsured postage. Therefore we alway recommend tracked postage. We do ship clothing to countries outside of the UK and EU. We do restrict other Gun accessories - thus if you attach anything other than clothing or scope stickers your order will NOT be shipped.

    In stock

    £18.99 - £19.99

  • Saber Tactical - FX Impact Magnetic Arm Lock Saber Tactical - FX Impact Magnetic Arm Lock side

    Saber Tactical Saber Tactical - FX Impact Magnetic Arm Lock

    In stock

    Saber Tactical - FX Impact Magnetic Arm Lock Airgun101 is proud to offer some of the ultimate accessories for FX Airguns. THIS FITS FX Impact M3 and MK2 ONLY This magnetic arm lock help keep the cocking arm open. Useful during competition when you are required to keep the bolt open. To install this magnetic lock you will need to remove the air from the system, thus remove the bottle and clear the air from the plenum. The plenum screw needs to be removed and replaced to add this attachment - warning - if you make your airgun leak or disturb any O rings or fittings we WILL NOT be held responsible.  Features: 6061 T6 Aluminum Black anodized Stainless steel screw Easy install Weigh only 1oz Installation instruction: Highly recommend you remove the bottle Fire the gun to remove any air in the plenum Unscrew bolt in front of plenum. See picture 1 Install Magnetic Arm Lock This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun 101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £35.00

  • Saber Tactical - Short Sleeve T-Shirt - Green US Logo

    Saber Tactical Saber Tactical - Short Sleeve T-Shirt - Green US Logo

    In stock

    Saber Tactical - Short Sleeve T-Shirt - Green US Logo GET THE LATEST SABER TACTICAL T'ss Available for the first time direct in the UK. Super comfortable, 60% cotton and 40% polyester Next Level t-shirts in a patriotic USA theme are available for sale. These shirts are available in limited numbers, get yours today!! Size Guide - In INCHES  SIZE IN INCHES S M L XL 2XL 3XL Body Length at Back 27 28 29 30 31 32 Chest Width 16 18 20 21 23 24 BODY LENGTH AT BACK Measured from high point shoulder to finished hem at the back CHEST WIDTH Measured across the chest one inch below the armhole when laid flat International Shipping If you do NOT see your country listed on checkout, please email us and we will happily provide you a quote. We do recommend you always select tracked postage, we are not liable for any loss in items sent worldwide if you choose cheap uninsured postage. Therefore we alway recommend tracked postage. We do ship clothing to countries outside of the UK and EU. We do restrict other Gun accessories - thus if you attach anything other than clothing or scope stickers your order will NOT be shipped.

    In stock

    £18.99 - £19.99

  • Saber Tactical - Short Sleeve T-Shirt - Black Logo

    Saber Tactical Saber Tactical - Short Sleeve T-Shirt - Black Logo

    In stock

    Saber Tactical - Short Sleeve T-Shirt - Black Logo GET THE LATEST SABER TACTICAL T'ss Available for the first time direct in the UK. Super comfortable, 60% cotton and 40% polyester Next Level t-shirts with a black-on-green theme are available for sale. These shirts are available in limited numbers, get yours today!! Size Guide - In INCHES  SIZE IN INCHES S M L XL 2XL 3XL Body Length at Back 27 28 29 31 32 32 Chest Width 16 18 20 22 23 24 BODY LENGTH AT BACK Measured from high point shoulder to finished hem at the back CHEST WIDTH Measured across the chest one inch below the armhole when laid flat International Shipping If you do NOT see your country listed on checkout, please email us and we will happily provide you a quote. We do recommend you always select tracked postage, we are not liable for any loss in items sent worldwide if you choose cheap uninsured postage. Therefore we alway recommend tracked postage. We do ship clothing to countries outside of the UK and EU. We do restrict other Gun accessories - thus if you attach anything other than clothing or scope stickers your order will NOT be shipped.

    In stock

    £18.99 - £19.99

  • Saber Tactical - Fx Panthera Front Bottle Adapter Saber Tactical - Fx Panthera Front Bottle Adapter

    Saber Tactical Saber Tactical - Fx Panthera Front Bottle Adapter

    In stock

    Saber Tactical - Fx Panthera Front Bottle Adapter Airgun 101 is proud to offer some of the ultimate accessories for Airguns. The Saber Tactical Fx Panthera Front Bottle Adapter is designed for convenience. It allows you to attach a second bottle of compressed air to the front of your rifle, providing a really nice alternate placement option for your bottles. The adapter is constructed with stainless steel for durability and attaches easily to the front of your rifle, allowing both bottles to work in tandem for extended shooting sessions. Upgrade your shooting experience with the Saber Tactical Fx Panthera Front Bottle Adapter. This is the adapter only and not the rear plug - thus it enables you to add the front bottle.   This fitting is installed by the user at their choice. We provide no installation instructions. We are not responsible in any way for bad fitting, leaks, damage to your rifle. If you place weight on the bottle and this adapter fails in any way we are not responsible. Any third party attachment is installed entirely at your won risk. This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £29.99

  • Saber Tactical - Window Saver Arca Swiss ST0061 Saber Tactical - Window Saver Arca Swiss ST0061

    Saber Tactical Saber Tactical - Window Saver Arca Swiss

    In stock

    Saber Tactical - Window Saver Arca Swiss   New to Airgun 101 Shop - the latest must have for the mobile shooter. The Saber Tactical Window Saver ST0061 is a must-have attachable rail for air rifle enthusiasts who enjoy shooting from their vehicle's window. Made of lightweight aluminum and a soft rubber pad, it can provide a stable and secure platform for shooting without damaging the car's door panels. This rail is compatible with most air rifles and can easily be attached to any ARCA rail system, providing a convenient and stable shooting experience. Whether you're a seasoned shooter or a beginner, the Saber Tactical Window Saver ST0061 is an essential tool for anyone who wants to improve their shooting accuracy while enjoying the convenience of shooting from their vehicle. Upgrade your air rifle with the Window Saver ST0061 today and experience the ultimate shooting experience without worrying about damaging your car door panels. PRODUCT FEATURES  6061 T6 Aluminum  Black anodize Rubber bottom padding  Length 20cm overall Padded Length 14.5cm Depth at Thumb Turn 4.5 cm Depth of front section 1.8 cm   Airgun 101 Shop is in no way responsible for any damage to any item when using this product. It is a home install which we offer no aftermarket service for. Any harm, damage or injury to any person or item is not the responsibility of Airgun 101 Shop or its parent company even if the product fails.

    In stock

    £74.99

  • Saber Tactical - Delrin Bushing for TRS Clamp

    Saber Tactical Saber Tactical - Delrin Bushing for TRS Clamp

    In stock

    Saber Tactical - Delrin Bushing for TRS Clamp This bushing goes inside the TRS clamp allowing you to stabilize the FX carbon fiber sleeve. This does not include the clamp. It works when the barrel tension carbon fibre system is fitted. Features: made of black delrin.    This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product. Airgun 101 Shop is in no way responsible for any product failure / fitting failure resulting in damage or injury to any item or person.

    In stock

    £9.99

  • Sale -£91.00 Saber Tactical - Panthera Brass Bridge Saber Tactical - Panthera Brass Bridge Extra Weight

    Saber Tactical Saber Tactical - Panthera Brass Bridge

    In stock

    Saber Tactical - Panthera Brass Bridge Airgun 101 is proud to offer some of the ultimate accessories for FX Airguns. Add an additional pound of weight with our brass bridge. Only compatible with our Saber Panthera rail since ours is wider than factory rail. Features: MLok slots on top allowing you to attach different accessories.  To be clear, you need to have the Saber Panthera Rail to use this, its not compatible with the FX Panthera rail that comes standard with the rifle. This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £230.99£139.99

  • Sale -£41.00 Saber Tactical - Panthera Rail Saber Tactical - Panthera Rail Bottom with Stippling

    Saber Tactical Saber Tactical - Panthera Rail

    In stock

    Saber Tactical - Panthera Rail Airgun 101 is proud to offer some of the ultimate accessories for FX Airguns. Our Saber Tactical Panthera rail has already proven itself in competition helping our shooters bring home the gold in PRS competitions. It adds the rigidity and weight needed to shoot accurately in different positions.  Features: The main body is made of lightweight T6 aluminum.  Removable brass inserts for added weight Mlok slots on the side allow shooters to add more weight to their setup Allows you to use a 300cc bottle when the middle brass weight is removed. Will require Panthera front bottle adapter ST0056. Jimping pattern underneath the rail to help grip shooting bags Wider than the factory rail Length = 17.71 in, Width = 1.96 in Weight = 4 pounds  Add an extra pound of weight with our brass bridge ST0059. This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £330.99£289.99

  • Stainless Steel Extended Quick Disconnect - Foster Fitting M32 Stainless Steel Extended Quick Disconnect - Foster Fitting M32

    Saber Tactical Stainless Steel Extended Quick Disconnect - Foster Fitting M32

    In stock

    Stainless Steel Extended Quick Disconnect - Foster Fitting M32 This extended quick disconnect (QD) makes it easy for those guns with hard to reach fill nipples. A must have for FX Impacts. Male foster fitting Max 4500 psi (Do not exceed recommended pressure) Release collar close to 1.20 inches long This product attaches to your existing high pressure foster connecting. Caution you are using High Pressure Air. This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun 101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting or failure of this product.

    In stock

    £24.99

  • Saber Tactical - FX Maverick / Wildcat Cheek Riser Saber Tactical - FX Maverick / Wildcat Cheek Riser side

    Saber Tactical Saber Tactical - FX Maverick / Wildcat Cheek Riser

    In stock

    Saber Tactical - FX Maverick / Wildcat Cheek Riser Airgun101 is proud to offer some of the ultimate accessories for FX Airguns. THIS FITS FX MAVERICK + FX Wildcat MK3 Cheek riser is made of delrin with Aluminum mounting plate Allows a little over 18mm of vertical adjustment. Ambidextrous for left and right hand shooters - ROUNDED TOP - it will not change the side the magazine loads. Weight = 3.6oz We have written an install guide which can be found here. This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun 101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £55.00

  • Saber Tactical - Mono Pod - Spare Adapter

    Saber Tactical Saber Tactical - Mono Pod - Spare Adapter

    In stock

    Saber Tactical - Mono Pod - Spare Adapter Airgun 101 is proud to offer some of the ultimate accessories for FX Airguns. If you have multiple buttstocks and would like to share the mono-pod, attach this adapter to the extra buttstock. Easily and quickly swap the monopod between them. Comes with adapter and screws to attach to the buttstock. This is the Mk2 version with the Stop Pin at the top. You must have the Saber Tactical Buttstock already installed, that is not included and yes the chassis Buttstocks look like they accept the Monopod. This is for the adapter only, the monopod, buttstock, rifle or anything else is not included.  This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £17.99

  • Saber Tactical - FX Panthera Bag Rider Saber Tactical - FX Panthera Bag Rider screws

    Saber Tactical Saber Tactical - FX Panthera Bag Rider

    In stock

    Saber Tactical - FX Panthera Bag Rider Airgun101 is proud to offer some of the ultimate accessories for FX Airguns. Engineered by shooters, for shooters, the FX Panthera Bag Rider is the ideal companion for competitive shooting disciplines such as PRS (Precision Rifle Series)and benchrest shooting.  Key Features: Precision CNC-machined for durability and performance. 6061 T6 aluminum Black anodize Quick and easy installation Part No ST0064 This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun 101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £59.99

  • Saber Tactical - FX Panthera/Dynamic Compact Arca Rail ST0073 Saber Tactical - FX Panthera/Dynamic Compact Arca Rail ST0073 Bottom

    Saber Tactical Saber Tactical - FX Panthera/Dynamic Compact Arca Rail

    In stock

    Saber Tactical - FX Panthera/Dynamic Compact Arca Rail Airgun 101 is proud to offer some of the ultimate accessories. Crafted from premium 6061 aluminum, this low profile arca rail enhances the aesthetic of the gun as well as the comfort when shooting off hand. Underneath the rail are Mlok slots that allows you to mount compatible accessories. The rail also has a 1/4-20 threaded hole for camera tripod adapters.  Features: 6061 T6 aluminum black anodize with lasered logo MLok slots underneath the rail threaded nylon tipped grub screw to help rail flex Extends to the end of a 300cc FX bottle   This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £149.99

  • Saber Tactical - FX Impact Arca 3 Compact Rail Saber Tactical - FX Impact Arca 3 Compact Rail Bottom

    Saber Tactical Saber Tactical - FX Impact Arca 3 Compact Rail

    In stock

    Saber Tactical - FX Impact Arca 3 Compact Rail Airgun101 is proud to offer some of the ultimate accessories for FX Airguns. NOW with INCLUDED Extended Saber Tactical Dust Cap worth £9.99 You can now mount your airgun on a Camera Tripod using the Arca Swiss Rail attachment. Want the ultimate shooting platform, sturdy and quick? Then mount your rifle to a quality tripod and simply stand, sit or relax and shoot. This rail has a full arca rail on the bottom for your compact FX Impact. It comes with an extended magnetic dust cap. Features: Made of 6061 T6 Aluminum Black anodized Nylon tipped set screw to prevent rail from flexing against the bottle Overall length from trigger guard to the end is 11.25 inches M Lok slots on bottom and on the side for your go to accessories 1/4-20 threaded hole for camera tripod adapters Quick disconnect holes on both sides Part No ST0047 This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun 101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £149.99

  • Sale -£4.01 Saber Tactical - Maverick - Top Rail Support (TRS) - Compact Length Saber Tactical - Maverick - Top Rail Support (TRS) - Compact Length side

    Saber Tactical Saber Tactical - Maverick - Top Rail Support (TRS) - Compact Length

    In stock

    Saber Tactical - Top Rail Support (TRS) - Compact Length - FX Maverick Airgun101 is proud to offer some of the ultimate accessories for FX Airguns. THIS FITS FX MAVERICK Compact Length is 15 Inches - See Images. Rifle in image is standard 500mm Integrated bubble level in the rear allowing you to quickly check to make sure your gun is level. A must have for long range shooting. M-Lok slots allowing you to attach varied accessories such as; flashlight, laser and weights. Built in 20 MOA, giving your scope more elevation for long range shooting. Has a Delrin shroud clamp to prevent shroud droop. It minimizes or eliminates any point of impact changes when switching suppressors. Weight = .8 lb We have written an install guide that can be found here. This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun 101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £240.00£235.99

  • Sale -£30.01 Saber Tactical - Tank / Dive Bottle Valve Saber Tactical - Tank / Dive Bottle Valve ST0031

    Saber Tactical Saber Tactical - Tank / Dive Bottle Valve

    In stock

    Saber Tactical - Tank / Dive Bottle Valve Airgun101 is proud to offer some of the ultimate accessories for FX Airguns. Replace your factory tank valve with our larger valve. The large knobs and handle make filling and releasing air a breeze! Features: Open and close tank with a 2.25 inch knob Drain the line with the 1.25 inch knob Dead head to test the tank's pressure 2.2 inch gauge display Tank thread 7/8-14 UNF Pair with ST0037 adapter to be able to screw on carbon fiber gun bottles. if you attempt to fit this and cannot complete the process - this becomes a used item. Using this item requires your dive tank / bottle to be removed of all the air. SAFETY FIRST, this is working with high pressure air that can result in injury if you get it wrong. We are NOT responsible for any harm injury or damage to any person or item if you get it wrong. This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun 101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £230.00£199.99

  • Sale -£4.01 Saber Tactical - Maverick - Top Rail Support (TRS) - Standard Length st0044 Saber Tactical - Maverick - Top Rail Support (TRS) - Standard Length Top Bubble

    Saber Tactical Saber Tactical - Maverick - Top Rail Support (TRS) - Standard Length

    In stock

    Saber Tactical - Top Rail Support (TRS) - Standard Length - FX Maverick Airgun101 is proud to offer some of the ultimate accessories for FX Airguns. THIS FITS FX MAVERICK Standard Length is 18 Inches - See Images. Rifle in image is standard 500mm Integrated bubble level in the rear allowing you to quickly check to make sure your gun is level. A must have for long range shooting. M-Lok slots allowing you to attach varied accessories such as; flashlight, laser and weights. Built in 20 MOA, giving your scope more elevation for long range shooting. Has a Delrin shroud clamp to prevent shroud droop. It minimizes or eliminates any point of impact changes when switching suppressors. Weight = 1lb 6061 T6 aluminum Black anodized We have written an install guide which can be found here. This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun 101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £250.00£245.99

  • Sale -£40.01 Saber Tactical - FX Panthera Hunter top Rail Saber Tactical - FX Panthera Hunter top Rail front bridge

    Saber Tactical Saber Tactical - FX Panthera Hunter Top Rail

    In stock

    Saber Tactical - FX Panthera Hunter Top Rail Airgun 101 is proud to offer some of the ultimate accessories for FX Airguns. Upgrade your FX Panthera Hunter with a Saber Tactical top rail.Key Features:Versatile Design: The FX Panthera Hunter Top Rail is engineered to provide you with unprecedented versatility. The rail has a cut out section that could be removed to work with a 300cc bottle (300cc max only) without modifying the bottle's location. If you prefer to move the bottle to the rear and not have a front bottle, just place the cutout back to give you more arca rail on the bottom. MLOK Slots: The Panthera Top Rail and bridge come equipped with MLOK slots, providing you with endless options for attaching accessories such as scopes, grips, lasers, and more. Premium Material: Crafted from high-quality 6061 aluminum, the FX Panthera Top Rail is not only incredibly durable but also lightweight. The black anodized finish not only adds a sleek, tactical look to your rifle but also enhances its resistance to wear and tear.Easy Installation: Installing the FX Panthera Top Rail is a breeze. Its user-friendly design ensures a hassle-free installation process. Weighs 1.2 lbs This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun 101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £300.00£259.99

  • Saber Tactical -  "Made For Champions" Trucker Cap Saber Tactical -  "Made For Champions" Trucker Cap rear clasp

    Saber Tactical Saber Tactical - "Made For Champions" Trucker Cap

    In stock

    Saber Tactical -  "Made For Champions" Trucker Cap Black with Black/White rubber patch logo. Fabric: 100% cotton front panels and bill, 100% polyester mid and back panels. Structure: Structured Profile: High Closure: 7-position adjustable snap

    In stock

    £19.99

  • Saber Tactical - Rail Weights / M-LOK Saber Tactical - Rail Weights / M-LOK

    Saber Tactical Saber Tactical - Rail Weights / M-LOK

    In stock

    Saber Tactical - Rail Weights / M-LOK Airgun 101 is proud to offer some of the ultimate accessories. The Saber Tactical Rail Weights are designed for use with "M-LOK" compatible handrails. These weights attach to the rail using the M-LOK system, allowing for a secure and seamless addition of weight to the handrail. This can help balance the rifle and reduce felt recoil. They also add a tactical look to the rifle. These M-LOK rail weights are a great choice for anyone looking to add weight and improve the balance of their rifle while still maintaining the ability to easily add or remove accessories. FEATURES Comes 2 per pack Weight 0.5 pounds each Made of Steel Zinc plated This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £49.99

  • Saber Tactical - Extended Quick Disconnect - Foster Fitting M32 Saber Tactical - Extended Quick Disconnect - Foster Fitting M32

    Saber Tactical Saber Tactical - Extended Quick Disconnect - Foster Fitting M32

    In stock

    Saber Tactical - Extended Quick Disconnect - Foster Fitting M32 This extended quick disconnect (QD) makes it easy for those guns with hard to reach fill nipples. A must have for FX Impacts and other small finger space rifles. You will need to screw this into your exisitng connection on your pump / bottle - supplied with a delrin washer to help create a tight seal.  Suggest small amount of PTFE tape on thread to help give that extra seal ( tape not supplied )  Male foster fitting Max 4500 psi (Do not exceed recommended pressure) Release collar close to 1.20 inches long

    In stock

    £19.99

  • Sale -£3.54 saber tactical cheek riser saber tactical cheek riser

    Saber Tactical Saber Tactical - FX Impact Cheek Riser

    In stock

    Saber Tactical - FX Impact Cheek Riser Airgun 101 is proud to offer some of the ultimate accessories for FX Airguns. Increase the adjustability of the cheek platform on the Impact, now you can custom fit where your cheek goes – while using the factory cheek plate. 68g  Fits MK1, MK2 and M3 Impacts See video tab for install instructions. Quick and simple. This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun 101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £59.99£56.45

  • Sale -£4.01 Saber Tactical - Top Rail Support (TRS) - Compact Length Saber Tactical - Top Rail Support (TRS) - Compact Length

    Saber Tactical Saber Tactical - FX Impact Top Rail Support (TRS) - Compact Length

    In stock

    Saber Tactical - Top Rail Support (TRS) - Compact Length - FX Impact Airgun101 is proud to offer some of the ultimate accessories for FX Airguns. THIS FITS FX IMPACTS MK1 / MK2 / M3 The delrin barrel support will not work with early MK1 extendable shrouds and the new barrel tension system. This new rail changes an already great looking tactical gun into a jaw dropping beast! More importantly, it opens up the possibilities with the latest airgun trends.  Features:Integrated bubble level in the rear allowing you to quickly check to make sure your gun is level. A must have for long range shooting.M-Lok slots allowing you to attach varied accessories such as; flashlight, laser and weights.It has a built in 20 MOA, giving your scope more elevation for long range shooting.A Delrin shroud clamp to prevent shroud drooping. It minimizes or eliminates any point of impact changes when switching suppressors.Available in standard and compact sizes with black anodize.  34cm Long 314g weight 29cm actual rail 20cm rail in front of middle screw ( helps to know how much rail sticks out at the front) Standard Length can be found HERE Please watch the video to help choosing and the install process. This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun 101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £240.00£235.99

  • Saber Tactical - FX Impact M3 First Regulator Bypass

    Saber Tactical Saber Tactical - FX Impact M3 First Regulator Bypass

    In stock

    Saber Tactical - FX Impact M3 First Regulator Bypass - FX Impact Airgun 101 is proud to offer some of the ultimate accessories for FX Airguns. This adapter replaces the factory's first regulator, it recovers the plenum chamber faster for a followup shot. It is highly recommended for PRS shooting style or hunting with no worries of the FPS dropping, causing your POI to change. Works with the old and new versions FX bottle valves. Helps in high powered pressure settings, allows you to run a higher pressure regulator directly in the plenum for the heavy slug shooting. This reg bypass is made of stainless steel to prevent rusting. You will need to remove the existing valve on your Impact - we are not responsible for that and provide no after sales support for this action. This is done at your own risk. This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £30.00

  • Saber Tactical FX Impact M3 MK2 MK1 Screw On Double Bottle Adapter Saber Tactical FX Impact M3 MK2 MK1 Screw On Double Bottle Adapter Demo

    Saber Tactical Saber Tactical FX Impact M3 MK2 MK1 Screw On Double Bottle Adapter

    In stock

    Saber Tactical FX Impact M3 MK2 MK1 Screw On Double Bottle Adapter This is the NEW version for 2022 - fully M3 compatible. This is the NEW version of the double bottle adapter from Saber Tactical. Now you can put two bottles on your Impact with the need to remove the original bottle valve from the gun. Simply place the new adapter over the bottle valve on the gun and screw the bolt down over the top with a 14mm spanner. Little bit of silicone lube on the big O ring ( lube not included ) and them attach your two bottles. It works with the new M3 bottles and original bottles, no need to change the valves in the bottle. Works with larger gauges. Please see the video from Saber Tactical. Important - The adapter does not have a valve within it, so when attaching a bottle or removing, both bottles must be turned in unison, otherwise air will leak from the attached bottle. So basically remove or add the bottles at the same time, or air will come out. This is a home install product, and it uses high pressure air - caution always be safe. Airgun 101 Shop is NOT liable in any way for any harm or injury to any person or belonging when using, installing or maintaining this product.    

    In stock

    £129.99

  • Sale -£55.00 Saber Tactical - Monopod - Bench Version Saber Tactical - Monopod - Bench Version

    Saber Tactical Saber Tactical - Monopod - Bench Version

    In stock

    Saber Tactical - Monopod - Bench Version Airgun 101 is proud to offer some of the ultimate accessories for FX Airguns. Saber Tactical releases the long waited Monopod for its existing Buttstock. We have the following details - while we wait for delivery. Attaches easily to the Saber Tactical Buttstock - NOT Included Precision lead screw allows for quick and accurate adjustments. It is very smooth and precise.  No need to loosen any knobs before making adjustments.  Mono-pods attach to adapter by very strong magnets. Very easy to detach and attach to the gun.  Bench (heavy duty with horizontal and vertical adjustments) It comes in 2 versions, the Bench ( this version  ) which has a custom plate at the bottom of the leg to enabling dialing left and right, along with up and down on the main leg to give a full range of adjustment.  Then there is the Field, ( not this version ) which adjusts only up and down. You must have the Saber Tactical Buttstock already installed, that is not included and yes the chassis Buttstocks look like they accept the Monopod. This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £250.00£195.00

  • Saber Tactical - Ambidextrous Thumb Rest Saber Tactical - Ambidextrous Thumb Rest 2

    Saber Tactical Saber Tactical - Ambidextrous Thumb Rest

    In stock

    Saber Tactical - Ambidextrous Thumb Rest Airgun 101 is proud to offer some of the ultimate accessories. The Saber Tactical Ambidextrous Thumb Rest for the Saber Grips is a must-have accessory for airgun enthusiasts looking to enhance their shooting experience. This thumb rest is designed with both left- and right-handed shooters in mind, offering a comfortable and secure thumb placement for improved accuracy and control. Constructed from high-quality materials, the rest fits snugly and securely onto the Saber Grips, providing a custom fit that enhances stability and accuracy. Whether you're an experienced airgun shooter or just starting out, the Saber Tactical Ambidextrous Thumb Rest is a valuable addition to your gear and is suitable for use with a wide range of airguns. The thumb rest requires the Saber Tactical Grip - SOLD SEPARATELY - Click Here This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £9.99

  • Saber Tactical - FX Panthera Standard Bottom Rail

    Saber Tactical Saber Tactical - FX Panthera Standard Bottom Rail

    In stock

    Saber Tactical - FX Panthera Standard Bottom Rail Airgun 101 is proud to offer some of the ultimate accessories. Features: 6061 T6 aluminum black anodize with lasered logo threaded nylon tipped grub screw to help rail flex Extends to the end of a 300cc FX bottle This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £154.99

  • Sale -£2.00 Saber Tactical - 60mm Bottle Clamp - Arca Rail Adapter Saber Tactical - 60mm Bottle Clamp - Arca Rail Adapter st0074

    Saber Tactical Saber Tactical - 60mm Bottle Clamp - Arca Rail Adapter

    In stock

    Saber Tactical - 60mm Bottle Clamp - ARCA Rail Adapter This is the ARCA version, if you want the Picatinny version then click HERE. If you're uneasy about drilling into your factory gun stock, this 60mm bottle clamp will easily attach to your 60mm carbon fiber or aluminum bottles. It has rubber pads on the inside to prevent any marring to your bottle.  This clamp has a 2-inch arca rail at the bottom for you to connect your preferred arca accessories. Features: 6061 T6 aluminum Matte black anodize Compatible with: FX Carbon Fiber & Steel BottlesRAW (HM1000X, etc)Daystate (Redwolf, Airwolf, etc)Brocock (Commander, Bantam, etc) This product clamps onto the outside of a high pressure bottle on an airgun - we accept no responsibility for any damage to any product or any harm toany individual - this is used ENTIRLEY at your own risk. Do not remove the rubber pads and use.Use as an adapter for attaching a Bipod - DO NOT attach a sling, shoulder strap or use it in any way to carry anything.This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £69.99£67.99

  • Saber Tactical - Arca Swiss Baricade Stop Saber Tactical - Arca Swiss Baricade Stop dimensions

    Saber Tactical Saber Tactical - Arca Swiss Baricade Stop

    In stock

    Saber Tactical - Arca Swiss Baricade Stop The Saber Tactical ARCA Rail Barricade Stop – Your Shortcut to Precision and Performance! Unlock the full potential of your ARCA rail-equipped gun with the Saber Tactical Barricade Stop – where innovation meets simplicity for the ultimate shooting experience. Swift Installation, Unmatched Versatility: Our Barricade Stop effortlessly glides onto your gun's ARCA rail, ensuring a hassle-free setup. No complicated installations, no time wasted. Just slide it on, and you're ready to dominate the shooting range. Precision at Your Fingertips: With a mere twist of the ergonomic Delrin handle, you gain full control over your shooting position. Tighten or loosen with ease to achieve the perfect balance and stability, adapting swiftly to changing shooting scenarios. Built for Excellence: Crafted from the finest 6061 aluminum, this Barricade Stop is not only lightweight but also rugged, ensuring it can withstand the harshest conditions. The Delrin handle provides a comfortable grip, giving you confidence and control with every shot. The Saber Tactical Advantage: Join the ranks of elite shooters who trust Saber Tactical for superior shooting accessories. We're dedicated to helping you achieve your shooting goals with the finest equipment available. This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £59.99

  • Sale -£80.00 Saber Tactical - Pro Universal Bench Monopod

    Saber Tactical Saber Tactical - Pro Universal Bench Monopod

    In stock

    Saber Tactical - Pro Universal Bench Monopod Airgun101 is proud to offer some of the ultimate accessories for FX Airguns. Key Features: - Smooth Moves: Easily adjust up and down for spot-on shots. - Fine-Tuning: Make small turns for perfect aim. - Competition-Ready: Level up your game and impress. - Solid Build: Stays stable, even in tough conditions. - Easy Setup: Quick to attach; fits most gun stocks. - Custom Tension: Adjust wheel tension your way Weight 3.4 lbs Warning - If you buy from a European store, remember to add the 20% Vat at the door + Import Charges - we are a UK store, so the price you see is the price you pay. Part No ST0069 This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun 101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £399.99£319.99

  • Edgun R3M and R3 Degasser Tool M39

    Donny FL Edgun R3M and R3 Degasser Tool M39

    In stock

    Edgun R3M and R3 Degasser Tool M39 Product description This tool makes degassing the Edgun R3M and R3 safe and easy. It also acan also be used to pull out the regulator. Instructions: before screwing the tool onto the Edgun, back out the screw a little to allow the valve pin to go into the tool.  screw the tool onto the valve Using the blue knob slowly screw into valve pin. You'll start to hear a hissing noise and that's the air being released.  once empty, your gauge should be down to zero to remove the regulator, make sure the gun is completely empty. Unscrew the screws holding the regulator in place. Once all the screws are out, screw the degasser tool onto the valve and pull it out of the air tube WE SUPPLY NO INSTRUCTIONS, THE ITEM ARRIVES IN A CLEAR BAG - WE ARE NOT RESPONSIBLE FOR ANY HARM OR DAMAGE TO YOU OR ANY OTHER PERSON OR ITEM WHEN USING THIS PRODUCT. 

    In stock

    £55.00

  • Sale -£3.50 Saber Tactical - Fx Impact Quick Disconnect Adapter Saber Tactical - Fx Impact Quick Disconnect Adapter

    Saber Tactical Saber Tactical - Fx Impact Quick Disconnect Adapter

    In stock

    Saber Tactical - Fx Impact Quick Disconnect Adapter Give your FX Impact a whole new carrying feel. Add a sling connection to the rear of your FX Impact - fits all models. Easily attached this to the rear of your FX impact and use a quick detach or straps for your sling. Features:  Made of harden steel    This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product. Airgun 101 Shop is in no way responsible for any product failure / fitting failure resulting in damage or injury to any item or person.

    In stock

    £24.99£21.49

  • Sale -£10.00 Saber Tactical - FX Impact Compact Rail Extender - Arca Swiss Saber Tactical - FX Impact Compact Rail Extender - Arca Swiss

    Saber Tactical Saber Tactical - FX Impact Compact Rail Extender - Arca Swiss - INC Dust Cap

    In stock

    Saber Tactical - FX Impact Compact Rail Extender - Arca Swiss NOW with INCLUDED Extended Saber Tactical Dust Cap worth £9.99 Airgun101 is proud to offer some of the ultimate accessories for FX Airguns. You can now mount your airgun on a Camera Tripod using the Arca Swiss Rail attachment. Want the ultimate shooting platform, sturdy and quick? Then mount your rifle to a quality tripod and simply stand, sit or relax and shoot. The rail fits using the existing 4 screws from the trigger guard on the bottom of the FX Impact – quick and simply and sturdy with very little flex. This compact arca swiss rail is great for the FX Impact with the short 300cc bottle. Makes the gun very comfortable to shoot off hand and allows you to attach your favorite shooting accessories such as a flashlight or laser pointer. Features: Aluminum 6061 T6 Hard black anodized Arca swiss rail with picatinny at the end 1/4 x 20 threads for common photography tripod adapter Fits MK1, MK2 and M3 Impacts Easy to fit, just follow the video instructions below. Using the Full Rail as Example. Part No ST 0023 This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun 101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £149.99£139.99

  • Sale -£15.00 Saber Tactical FX Impact Extended Arca Swiss Rail ST0007 Saber Tactical FX Impact Extended Arca Swiss

    Saber Tactical Saber Tactical - FX Impact Rail Extender - Arca Swiss - INC Dust Cap

    In stock

    Saber Tactical - FX Impact Rail Extender - Arca Swiss Airgun101 is proud to offer some of the ultimate accessories for FX Airguns. NOW with INCLUDED Extended Saber Tactical Dust Cap worth £9.99 You can now mount your airgun on a Camera Tripod using the Arca Swiss Rail attachment. Want the ultimate shooting platform, sturdy and quick? Then mount your rifle to a quality tripod and simply stand, sit or relax and shoot. The rail fits using the existing 4 screws from the trigger guard on the bottom of the FX Impact – quick and simply and sturdy with very little flex. PLUS – You have the Picatinny section at the front to be able to quickly change to a bipod. Weight 248g Overall Length 35.5 Arca Rail Section 20cm Pic Rail at front 4.5cm Fits MK1, MK2 and M3 Impacts Easy to fit, just follow the video instructions below. Part No ST 0007 This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun 101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £149.99£134.99

  • Sale -£4.01 Saber Tactical - Top Rail Support (TRS) - Standard Length Saber Tactical - Top Rail Support (TRS) - Standard Length

    Saber Tactical Saber Tactical - FX Impact Top Rail Support (TRS) - Standard Length

    In stock

    Saber Tactical - Top Rail Support (TRS) - Standard Length - FX Impact Airgun101 is proud to offer some of the ultimate accessories for FX Airguns. THIS FITS FX IMPACTS MK1 / MK2 / M3 The delrin barrel support will not work with early MK1 extendable shrouds and the new barrel tension system. This new rail changes an already great looking tactical gun into a jaw dropping beast! More importantly, it opens up the possibilities with the latest airgun trends. Features: Integrated bubble level in the rear allowing you to quickly check to make sure your gun is level. A must have for long range shooting. M-Lok slots allowing you to attach varied accessories such as; flashlight, laser and weights. It has a built in 20 MOA, giving your scope more elevation for long range shooting. A Delrin shroud clamp to prevent shroud drooping. It minimizes or eliminates any point of impact changes when switching suppressors. Available in standard and compact sizes with black anodize.  PRODUCT UPDATE 20TH JULY 2022 The Standard length rail has been reduced by .25inch or .635cm - to help with the fitting of the shroud on a 600mm config. Most will not notice any difference. 45.5cm Long 432g weight 40cm actual rail 31.5cm rail in front of middle screw ( helps to know how much rail sticks out at the front) Compact Length can be found HERE Please watch the video to help choosing and the install process.   This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun 101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £250.00£245.99

  • Saber Tactical - Airgun Bottle Degasser Kit - Carbon Bottle Valve Remover

    Saber Tactical Airgun Bottle Degasser Kit - Carbon Bottle Valve Remover

    In stock

    Saber Tactical - Airgun Bottle Degasser Kit - Carbon Bottle Valve Remover Airgun101 is proud to offer some of the ultimate accessories for FX Airguns. This kit comes in handy when you have to travel with your airguns. TSA requires that the bottles are empty and may ask you to disassemble it to show that it is empty. It has a knurled screw that screws into the bottle and releases the air. Once the tank is empty, attach the red bottle clamp onto the bottle and use the custom wrench to slowly unscrew and release any remaining air. The red bottle clamp is lined with silicone pads, it does not mark your bottle.    Part No - ST0020 Airgun 101 Shop is in no way liable for any damage / harm / injury to any person or item when using this product. - Caution working with high pressure air is always dangerous, work safely and take precautions.

    In stock

    £64.99

  • Sale -£7.00 Saber Tactical - FX Impact Arca Rail 2 - Arca Swiss - INC Dust Cap Saber Tactical - FX Impact Arca Rail 2 - Arca Swiss - INC Dust Cap

    Saber Tactical Saber Tactical - FX Impact Arca Rail 2 - Arca Swiss - INC Dust Cap

    In stock

    Saber Tactical - FX Impact Rail Extender - Arca Swiss - MK2 Airgun101 is proud to offer some of the ultimate accessories for FX Airguns. NOW with INCLUDED Extended Saber Tactical Dust Cap worth £9.99 You can now mount your airgun on a Camera Tripod using the Arca Swiss Rail attachment. Want the ultimate shooting platform, sturdy and quick? Then mount your rifle to a quality tripod and simply stand, sit or relax and shoot. Similar to the first Arca Rail, however this one has T slots on the both sides allowing you to attach shooting accessories such as flashlight and laser. Edges are very smooth and makes it very comfortable to shoot offhand. Features: Aluminum 6061 T6 Hard black anodize Arca Swiss Rail underneath with Picatinny at the end Also has 1/4 x 20 threads for common camera tripod attachment Fits MK1, MK2 and M3 Impacts Easy to fit, just follow the video instructions below. Fitting is the same for all rails. Part No ST 0022 This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun 101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £149.99£142.99

  • Saber Tactical - Extended Dust Cap - Magnetic - Foster Cover Saber Tactical - Extended Dust Cap - Magnetic - Foster Cover

    Saber Tactical Saber Tactical - Extended Dust Cap - Magnetic - Foster Cover

    In stock

    Saber Tactical - Extended Dust Cap - Magnetic - Foster Cover Extended dust cap makes it easier to get into those tight trigger guards. With this dust cap, you can easily remove without straining your finger muscles :) Features: Made of black delrin with a strong magnet inside Measure 14mm outer diameter and just shy of 23mm long

    In stock

    £8.99

  • Saber Tactical - FX Impact Low Profile Full Arca Swiss Rail Top View Saber Tactical - FX Impact Low Profile Full Arca Swiss Rail MLOK

    Saber Tactical Saber Tactical - FX Impact Low Profile Full Arca Swiss Rail

    In stock

    FX Impact Low Profile Full Arca Swiss Rail Airgun 101 is proud to offer some of the ultimate accessories for FX Airguns. For those that do not need picatinny slots at the end of their rail, this one has full arca. Ideal for the 580cc and 700cc bottles.  Features: MLok slots at the bottom and on both sides of the rail for add-on accessories. Low profile, hugs closer to the bottle Sling QD slots on both sides 6061 T6 Alluminum  Black anodize From start of trigger guard until the end of rail is 15.75 inches x 2.75 inches wide This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun 101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £165.00

  • Saber Tactical - Tank / Dive Bottle Bag Saber Tactical - Tank / Dive Bottle Bag Zip

    Saber Tactical Saber Tactical - Tank / Dive Bottle Bag

    In stock

    Saber Tactical - Tank / Dive Bottle Bag Airgun101 is proud to offer some of the ultimate accessories for FX Airguns. Saber Tactical tank bags are here. Large enough to fit a 9.0L tank. They are one size. Features: OD green 29 inches max length of tank and valve together two large pockets for accessories Long velcro strip for patches Mole webbings to attach your other mole compatible accessories  Clear slot for ID card This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun 101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £199.99

  • Saber Tactical - Rail Weight V2 / M-LOK ST0062 Saber Tactical - Rail Weight V2 / M-LOK ST0062 on rifle

    Saber Tactical Saber Tactical - Rail Weight V2 / M-LOK

    In stock

    Saber Tactical - Rail Weight V2 / M-LOK Airgun 101 is proud to offer some of the ultimate accessories. Looking to improve your performance for competition shooting? The MLOK weights with brass inserts are the solution you've been seeking! Designed to balance your gun, these weights are crafted from high-quality 304 steel, ensuring a durable and sturdy construction that will last you many competitions to come.The MLOK weights feature brass inserts which help to redistribute the weight of your gun, creating a more balanced and stable shooting experience. The electro-plating finish adds an extra layer of protection to resist wear and tear, ensuring your MLOK weights stay in top condition for longer.MLOK weights with brass inserts are easy to install and compatible with most MLOK rails, making them a versatile addition to any shooting setup.  Features a striking gun metal gray color with a mirror finish, complemented by brass inserts This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £97.99

  • Sale -£21.00 Saber Tactical FX Impact Extended Picatinny Rail ST0006 Saber Tactical FX Impact Extended Pic Rail

    Saber Tactical Saber Tactical - FX Impact Rail Extender - Picatinny - INC Dust Cap

    In stock

    Saber Tactical - FX Impact Rail Extender - Picatinny Airgun 101 is proud to offer some of the ultimate accessories for FX Airguns. NOW with INCLUDED Extended Saber Tactical Dust Cap worth £9.99 Rebalance your Impact with an extended Pic rail. This accessory allows your Picatinny bipod to be mounted further forward, making the rifle more balanced when shooting from a bipod, and giving many many more mounting positions. Using the existing mounting screws, it easily replaces the trigger guard on the Impact. Made from the highest quality materials, its sturdy with very little flex. Weight 209g Overall Length 35.5 Pic Mounting Area 21.5cm Easy install using existing 4 screws Fits MK1, MK2 and M3 Impacts Part No ST0006 This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun 101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £149.99£128.99

  • Saber Tactical - Fx Panthera Drop-down Front Bottle Adapter Saber Tactical - Fx Panthera Drop-down Front Bottle Adapter Example On Rifle

    Saber Tactical Saber Tactical - Fx Panthera Drop-down Front Bottle Adapter

    In stock

    Saber Tactical - Fx Panthera Drop-down Front Bottle Adapter Airgun 101 is proud to offer some of the ultimate accessories for FX Airguns. Precision-engineered and meticulously crafted, the Saber Tactical Fx Panthera Drop-down Front Bottle Adapter seamlessly integrates with your FX Panthera PCP air rifle, establishing a secure and reliable connection and allowing you to attach a bottle to the front of the Panthera while continuing to utilize either the stock Panthera rail or the Saber Tactical Pathera Rail. Its durable construction ensures long-lasting performance, even during rigorous shooting sessions and adverse conditions.  PRODUCT FEATURES - 7.6oz in weight- Made of 304 Stainless Steele with electroplating  This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £55.99

  • Sale -£15.01 Saber Tactical - Monopod - Field Version Saber Tactical - Monopod - Field Version

    Saber Tactical Saber Tactical - Monopod - Field Version

    In stock

    Saber Tactical - Monopod - Field Version Airgun 101 is proud to offer some of the ultimate accessories for FX Airguns. Saber Tactical releases the long waited Monopod for its existing Buttstock. We have the following details - while we wait for delivery. Attaches easily to the Saber Tactical Buttstock - NOT Included Precision lead screw allows for quick and accurate adjustments. It is very smooth and precise.  No need to loosen any knobs before making adjustments.  Has rubber padding on the bottom for extra grip. Mono-pods attach to adapter by very strong magnets. Very easy to detach and attach to the gun.  It comes in 2 versions, the Field ( this version  ) which has a single foot and adjusts up and down only. Then there is the Bench, ( not this version ) which adjusts height and has a custom plate on the bottom to adjusts accurately left and right.  You must have the Saber Tactical Buttstock already installed, that is not included and yes the chassis Buttstocks look like they accept the Monopod. This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £150.00£134.99

  • Saber Tactical - Fx Impact Ambidextrous Cheek Rest Saber Tactical - Fx Impact Ambidextrous Cheek Rest

    Saber Tactical Saber Tactical - Fx Impact Ambidextrous Cheek Rest

    In stock

    Saber Tactical - Fx Impact Ambidextrous Cheek Rest Airgun101 is proud to offer some of the ultimate accessories for FX Airguns. The Fx Impact Ambidextrous Cheek Rest is the perfect accessory for any shooter. Whether right or left-handed, this cheek rest will provide a comfortable and stable platform for your cheek while shooting. The cheek rest is extremely easy to install, and it's made of durable materials that will last you a long time. With the Fx Impact Ambidextrous Cheek Rest, you'll be able to shoot with improved accuracy and comfort. Order yours today and see the difference for yourself! FEATURES Compatible with all versions of the Fx Impact Compatible with the Saber Tactical Cheek Risers Weighs only 3.2 oz Made entirely of Delrin material   Part No ST0054 This is an aftermarket accessory designed for home fitting. We do not provide any fitting service. Airgun 101 Shop is in no way liable for any damage / harm / injury to any person or item when fitting this product.

    In stock

    £34.99


You have seen 48 out of 70 products

© 2024 Airgun101 Shop,

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Union Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account