
Age verification
Please confirm that you are 18 years or older to enter the shop.
Have patience...
You are not old enough to visit the shop yet.
M4 Bubble Level - Eagle Vision Screws into the side of the Eagle Vision Mounts. One per Pack - Choose a Colour. Only Tested on Eagle Vision - will not fit other mounts mount and other accessories NOT Included
£14.38
Eagle Vision Fully Adjustable Picatinny Torch, Laser, Mount 1 per Pack This is the Micro Version of the fully adjustable windage and elevation mount, ideal for adding accessories and making them fully adjustable with ease. We are very proud of this product as it’s development resolves some issues for shooters, who depend on the reliability of a solid mount. Main benefits of using this mount: 1. Adjustability:FULLY ADJUSTABLE, FORWARD or BACKWARD , ELEVATION, WINDAGE, HEIGHT ADJUSTMENT, that allows the Accessoris to move vertically and horizontally along a guided path, and lockable in different positions, using 2x screws on the side of this mount. 2. Longer range shooting:Pair of this mounts can be instal under any Picatinny scope mount and do elevation or hight adjustments for long range before running out of adjustment on the turretsis the ability for users who need to reach out further but are restricted by their current mounting system.By keeping the front mount at it’s lowest and elevating the rear mount to the highest point you can zero in your gun far beyond, without using the clicks on your turrets, hence keeping the optical centre of your scope intact. 3.Using Single can fully adjustable Windage/elevation, using pair can be only elevating Technical information for the new mount: Length: 60mmProfile height from bottom of the mount to middle of the top picatinny rail, 21mm.Total height: 30.30mmAdjustable Height: 4.5mmWeight: 81 grams Product includes: 1x Infinity picatinny Torch mount3 x Allen keys, (two different sizes)3 x side screws2 x m5 spring screw Torque calculation:Adjustable side screws maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.Picatinny nuts maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.
£53.98
Dovetail To Picatinny Weaver 150mm 13 mm To 22mm Rail Converter This Adaptor allows you to convert your Dovetail rail to Picatinny with less modifications and low profile. After tightening a few screws on the side, the rail will stay tight and secure on the place. 150mm Long 13mm Dovetail to 22mm Picatinny Pack contains 1 rail. Better than the cheap Ebay ones, has screws on the side to help secure.
£31.99
FX Wildcat Magazine .22 MK1 + MK2 - Eaglevision Design FX Wildcat aluminium magazine Designed and manufactured by Eagle Vision.Each magazine comes with 4 extra O-rings. Easier to load Holds pellets more secure Smoother rotation Centre ball bearing makes a positive connection Easier to change the O-rings Numbered magazine shot count
£25.20
FX Wildcat Magazine .25 MK1 + MK2 - Eaglevision Design FX Wildcat aluminium magazine Designed and manufactured by Eagle Vision.Each magazine comes with 4 extra O-rings. Easier to load Holds pellets more secure Smoother rotation Centre ball bearing makes a positive connection Easier to change the O-rings Numbered magazine shot count
£25.20
EDgun Magazine Aluminium MK2. .177 + 4 Extra O-rings CNC Machined Aluminium Magazine Each magazine comes with 4 extra O-rings. Fits to: Edgun R3M Edgun R5 all the models Edgun Lelya 2.0 We’ve added some improvements such as: Easier to load Holds pellets more secure Smoother rotation Centre ball bearing makes a positive connection Numbered magazine shot count
£25.20
108 MOA One Piece Elevation Adjustable forward/Backward Picatinny 125 We have designed and developed an amazing new Picatinny mount.We are very proud of this product as its development resolves some issues for shooters, who depend on the reliability of a solid mount. This is the shorter version of the Original Pard Mount. 12.5cm Top Rail. Main benefits of using this mount: 1. NV scope:It can be directly fitted to the Pard 008 008P 008LRF ( will not fit NV008S ) 2. Adjustability:FULLY ADJUSTABLE, FORWARD or BACKWARD , ELEVATION, WINDAGE, EYE RELIEF AND HEIGHT ADJUSTMENT, that allows the scope to move vertically and horizontally along a guided path, and lockable in different positions, using 3x or 4x or 5x screws on the side of this mount. 3. Combined with a Scope cam:This mount allows users to adjust their scope forward, backwards, or adjust it vertically to align the scope with their eye relief or eye level.Users wishing to use their scope camera and record a session while shouldering their rifle, but the screen needs to be further to their eyes, or, for some applications they might require the camera to be closer to the eyes, such as pard/ Nightvision scopes etc. 4. Longer range shooting:long range before running out of adjustment on the turretsis the ability for users who need to reach out further but are restricted by their current mounting system.By keeping the front mount at it’s lowest and elevating the rear mount to the highest point you can zero in your gun far beyond, without using the clicks on your turrets, hence keeping the optical centre of your scope intact. 5. Multiple rifles:This system can be used to install scope mounts for the owner’s of multiple rifles who require to use one scope for all of their rigs by installing one Infinity mount to each rifle.They can zero then just swap the scope between them, with little need for turret click adjustment. 6. Durability:This product is robust enough to be installed on heavy recoil rifles, up to .308 caliber. Technical information for the new ‘INFINITY’ mount: Length: Top Rail 12.5cm / Bottom Piece 12.5cm / Rail Section 8cmProfile height from bottom of the mount to middle of the top picatinny rail, 21mm.Total height: 30.30mmAdjustable Height: 4.5mmWeight: 175 grams Product includes: 1x Infinity picatinny mount3 x Allen keys, (two different sizes)5 x side screws1x m5 spring screw4x pard 008 attachment screws1x Waterproof case Torque calculation:Adjustable side screws maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.Picatinny nuts maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.
£101.99
Eaglevision Pard NV007S Adapter Tube This tube is designed to replace the Pard NV007S tube. This unit will not work alone as it has to be connected to our Pard Adapter Kit Made of aluminium. The size of threads is m42 x 0.6 pitch Length: 24mm Better than the cheap Ebay ones. Note - The photos are a generic photo and the Eaglevision logo is not on the first batch of adapters. Example of use - You have purchased a Pard Adapter Kit, with the A/V connector and you now wish to connect an S 007 Pard - this is the part you require to purchase.
£24.99
2 X 50mm 11mm Dovetail to Picatinny Adapter Convertor These are 2 X 50mm 11mm Dovetail to Picatinny Adaptors Made from aluminium - Eagle Vision HIGH quality. There are two ways of how you can use this product: Option 1: Take the side grab screws off, place the rail in your scope mount, then while you’re tightening your scope mount it will grab and hold your rifle Dovetail Rail.Option 2: Place the adaptor on your rifle rail, tight the side grab screws so the adaptor will stay on your rifle rail. You can secure the adaptor by grab screws from top for rifle with some recoil. Package includes: 2x 50mm adaptors 2x Allen key 4 x top grab screws 2 different length 2 x spare side grab screws 2 x spare ends grab screws Profile height: 4mm Designed to work with all our Scope Mounts. It may work with other scope mounts as well, however we cannot guarantee this. Better than the cheap Ebay ones.
£29.98
Eagle Vision Infinity Elevation Adjustable Scope Mount 34mm Ring Picatinny IPS-34 Special Offer SALE Eagle Vision have designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This well-designed scope mount allows vertical movement along a guided path, and can be adjusted for low profile, and also for high profile settings. The INFINITY mounts are also lockable in different positions using two screws. INFINITY mounts are ideal for long range shooting and are extensively used for larger objective scopes, increasing space between your scope, barrel or shroud and enabling you to zero in your gun far beyond standard mounts. The design of the mount keeps the front mount lower and elevates the rear mount to a higher position. This in turn, is helpful for long-range shooters who find standard scope mount clicks on their turrets self running and unadjusted. Exceptionally well presented in the case and finished to a very high quality. Details: Height - 65mm to 69.5mm ( adjustable ) Profile Height - 21mm Adjustable Height - 4.5mm Weight - 92g each Centre of the ring to the bottom of the rail - 38mm in closed postion Centre of the ring to the bottom of the rail - 42.4mm in open postion Ring Size 34mm Rail size - 20mm Picatinny 2 x Alan Keys Included 4 x Small spare screws 1 x Large spare screw Protection Fabric Waterproof Case Bubble Gauge NOT Included Do not remove the elevation screws unless the mount is fully raised / in the high / open elevation position or you will damage the mount.
£99.99£83.98
Dovetail To Picatinny Weaver 120mm 11 mm To 22mm Rail Converter This Adaptor allows you to convert your Dovetail rail to Picatinny with less modifications and low profile. After tightening a few screws on the side, the rail will stay tight and secure on the place. 120mm Long 11mm Dovetail to 22mm Picatinny Pack contains 120mm adapter 2x allen key 4x top grab screws (2 different lengths) 2x spare side grab screws 2x spare ends grab screws Better than the cheap Ebay ones, has screws on the side to help secure.
£27.57
2 X 37mm 11mm Dovetail to Picatinny Adapter Convertor These are 2 X 37mm 11mm Dovetail to Picatinny Adaptors Made from aluminium - Eagle Vision HIGH quality. There are two ways of how you can use this product: Option 1: Take the side grab screws off, place the rail in your scope mount, then while you’re tightening your scope mount it will grab and hold your rifle Dovetail Rail.Option 2: Place the adaptor on your rifle rail, tight the side grab screws so the adaptor will stay on your rifle rail. You can secure the adaptor by grab screws from top for rifle with some recoil. Package includes: 2x 37mm adapter 2x Allen key 4 x top grab screws 2 different length 2 x spare side grab screws 2 x spare ends grab screws Profile height: 4mm Better than the cheap Ebay ones.
£23.98
Dovetail To Picatinny Weaver 100mm 11 mm To 22mm Rail Converter This Adaptor allows you to convert your Dovetail rail to Picatinny with less modifications and low profile. After tightening a few screws on the side, the rail will stay tight and secure on the place. 100mm Long 11mm Dovetail to 22mm Picatinny Pack contains 100mm adapter 2x allen key 4x top grab screws (2 different lengths) 2x spare side grab screws 2x spare ends grab screws Better than the cheap Ebay ones, has screws on the side to help secure.
£23.98
Dovetail To Picatinny Weaver 200mm 11 mm To 22mm Rail Converter This Adaptor allows you to convert your Dovetail rail to Picatinny with less modifications and low profile. After tightening a few screws on the side, the rail will stay tight and secure on the place. 200mm Long 11mm Dovetail to 22mm Picatinny Pack contains 200mm adapter 2x allen key 4x top grab screws (2 different lengths) 2x spare side grab screws 2x spare ends grab screws Better than the cheap Ebay ones, has screws on the side to help secure.
£38.37
Eagle Vision - FX Impact High Capacity SLUG Magazine .22 - 27 Shot This is a high capacity SLUG magazine, designed for the FX Impact platform. This magazine is designed for slugs only. This product will not fit the early model FX Impact (MK1/2) unless they have been fitted with the adapter plate to accept larger capacity magazines. Improvements include: Magnetic cover Higher capacity Easy load Secure SLUG retention Very smooth rotation Numbered shot count 22 (5.5mm) – 27 shots Maximum: slug lengths11.5mm dome head This package includes: 1x 3mm Allen key 6x rubber balls 1x waterproof storage case We do not supply spare rubber balls. It is made from aluminum and cut by a CNC machine. You may be unable to fit this magazine to your gun if you use aftermarket, non-standard, or non-factory original parts, such as the Inlet Transfer Port. Before purchasing the magazine, make sure all the parts of your rifle are original. We do not accept returns if the magazine gets dented or scratched for that reason. If you are using a modified brass inlet port or the barrel housing is not factory original this may not fit. These are designed to work with the standard FX factory barrel system and brass transfer port. We do not accept returns if the magazine is damaged or scratched due to a non factory transfer port being used.
£107.98
Infinity Forward Elevation Adjustable Picatinny Scope Mount 30mm Want a mount that moves forward to give more eye relief and elevation all in one. This may be what your looking for. Give yourself that extra reach at long range - adding this mount gives more elevation to your scope and allows your favourite optic to add on rear mounted items without having to fully re-zero. Height: 68.25mm to 77.75 mm adjustable. Profile Height: 23 mm Adjustable Height: 9.5mm. Weight: 81 g each. Centre of the ring to the bottom of the rail: 41mm (in closed position). Centre of the ring to the bottom of the rail: 51.5mm (in open position). Ring size: 30mm Rail size: 20mm Picatinny Picatinny Mounting ( purchase optional extra Pic to Dovetail adapter ) Bubble Mount included -will be a random colour.
£149.99£119.99
Eagle Vision Universal Harmonic Barrel Tuner - Black STD Front End This is the Standard version of the barrel tuner. This version comes with the caliber adapters that screw into the front end of the tuner - these do not allow the addition of a moderator. Our new multi-caliber Universal Harmonic Barrel Tuner system can be used in different air rifles with various calibers. The interchangeable caliber adaptor can easily be swapped for another adaptor, with the tools provided. The front caliber adaptor with 8 holes, looks great and is designed so to allow insertion of the stainless steel bar tool, to tighten or loosen the adaptor. There are no moving parts, all components are fully secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping. These products are manufactured by 5 Axis CNC tolerance of + or – 0.05 Product includes: 1x Universal Harmonic Barrel Tuner choice of black or silver 4x O- rings 6x screws 1x Allen key 1/2 UNF X 20 End adapter for rifle connection 1x Allen key 1x waterproof Storage Case 4x piece of caliber specific adaptor .177, .22, .25 and .30 (included 8x stainless steel tool bars)
£78.00
2 X 26mm 11mm Dovetail to Picatinny Adaptor Convertor Ideal for BSA - Air Arms - Daystate These are 2 X 26mm 11mm dovetail to Picatinny Adaptor Made from aluminium Choose the right size for your Application. Package includes: 2 x 26mm adapter - Length 2 x Allen key 2 x grab screws 2x spear side screws Profile height 4mm 2 adapters per pack Better than the cheap Ebay ones.
£21.50
Eagle Vision One Piece Infinity Elevation Adjustable Scope Mount Picatinny 30mm This well-designed scope mount allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws.The mount can be used as low profile or adjusted the to high profile too if your scope objective its too close to your rifle barrel or shroud.This practical patent helps shooters who enjoy long-range shooting and often run out of adjustment clicks on their turrets.The mount can also come handy if you have not been able to use your favorite scope due to lack of space between the rings or unusual position of your dovetail or picatinny rail on your gun.We are very proud of this product as it became a “must have” solution among people who love their bullpups.The design of the mount is dedicated to people who want to improve their performance contrasting with what ordinary mounts allow to do. By keeping the front mount at its lowest and elevating the rear mount to the highest point, you can zero in your gun far beyond what standard mounts allow you to do, without using the clicks on your turrets, hence keeping the optical centre of your scope intact (ideal situation for long range shooting). Please note: DO NOT use more than 4x elevation screws as you may damage your mount. Details: Height: 65 mm to 69.5 mm (adjustable) Profil Height: 21 mm Adjustable Height: 4.5 mm Weight: 92 gm each one Centre of the ring to the bottom of the rail: 38 mm in closed position Centre of the ring to the bottom of the rail: 42.5 mm in opened position Ring size: 34 mm Rail size: 22 mm picatinny Item includes: 1 x infinity scope mount 3 x allen key set – different sizes 4 x small spear screws 6 x large screws 1 x waterproof case Pressure calculation: Ring screws maximum Torque, 15-20 Inch-pounds Force to 1.68-2.25 NM Newton Meters. Adjustable side screws maximum Torque, 53-71 Inch-pounds Force to 6-8 NM Newton Meters. Picatinny nuts maximum Torque, 53-71 Inch-pounds Force to 6-8 NM Newton Meters.
£107.98
Eagle Vision MZB-32 Muzzle Brake / Air Stripper with Interchangeable caliber 1/2 UNF Our new multi-caliber muzzle brake system can be used in different air rifles with various calibers.The interchangeable caliber adaptor can easily be swapped for another adaptor, with the tools provided. Interchangeable end adaptor to 1/2 UNF INCLUDED SHIPS WITH 1/2 UNF ADAPTER X 20, M14X1.25, M18X1, M20X1 OPTION - NOT INCLUDED There are no moving parts, all components are fully secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping.These products are manufactured by 5 Axis CNC tolerance of + or – 0.05 All our end adaptors can be used with future Eagle Vision sound moderators, muzzle brakes and harmonic barrel tuner models. The caliber specific adaptor helps to increase accuracy; The holes release air pressure from the sides helping to reduce the recoil. The front caliber adaptor with 8 holes, looks great and is designed so to allow insertion of the stainless steel bar tool, to tighten or loosen the adaptor. Caliber adaptors:.177, .22, .25 and .30 Some home assembly of muzzle break is required. SPECIFICATIONS MZB-32 Length: 55mm diameter: 32mm Weight: 40 grams End Thread: M23 X 1 Front Threads: M15X0.6 Product includes: 1x Muzzle Brake 4x O- rings 6x screws 1x Allen key 1x end adaptor of 1/2 UNF is included 2x stainless steel tool bar 1x Allen key 1x waterproof Storage Case 4x piece if caliber specific adaptor .177, .22, .25 and .30 (included 8x stainless steel tool bars)
£72.00
Eagle Vision MZB-40 Muzzle Brake / Air Stripper with Interchangeable caliber 1/2 UNF Our new multi-caliber muzzle brake system can be used in different air rifles with various calibers.The interchangeable caliber adaptor can easily be swapped for another adaptor, with the tools provided. Interchangeable end adaptor to 1/2 UNF INCLUDED SHIPS WITH 1/2 UNF ADAPTER X 20, M14X1.25, M18X1, M20X1 OPTION - NOT INCLUDED There are no moving parts, all components are fully secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping.These products are manufactured by 5 Axis CNC tolerance of + or – 0.05 All our end adaptors can be used with future Eagle Vision sound moderators, muzzle brakes and harmonic barrel tuner models. The caliber specific adaptor helps to increase accuracy; The holes release air pressure from the sides helping to reduce the recoil. The front caliber adaptor with 8 holes, looks great and is designed so to allow insertion of the stainless steel bar tool, to tighten or loosen the adaptor. Caliber adaptors:.177, .22, .25 and .30 Some home assembly of muzzle break is required. SPECIFICATIONS MZB-40 Length: 55mm diameter: 40mm Weight: 82 grams End Thread: M23 X 1 Front Threads: M15X0.6 Product includes: 1x Muzzle Brake 4x O- rings 6x screws 1x Allen key 1x end adaptor of 1/2 UNF is included 2x stainless steel tool bar 1x Allen key 1x waterproof Storage Case 4x piece if caliber specific adaptor .177, .22, .25 and .30 (included 8x stainless steel tool bars)
£72.00
Pard NV007 Scope Holder Tube Replacement Night Vision Kit This unit is designed to replace the pard NV007A/V tube. THIS WILL NOT FIT THE PARD NV007 SP - THE NEW MODEL WITH VERTICAL BATTERY. NV007S adapters are available - HERE The USH-46 goes over the scope eye relief and requires minimum 20mm / maximum 45mm space. If you have an IR Illuminated switch at the eye relief end, check your measurements. This unit can be connected to 99% of the scopes from eye relief outer with dimension of 40mm to 46.5mm and it will find the centre automatically while you are tightening it. TOTAL length: 69mm Our pard ring length: 24mm Made of aluminium. Package includes: 1 x Universal scope holder USH-46 1 x pard Adaptor ring PR-007 1 x Storage case 1 x Silicon grease tube Please note: The Pard 007 is NOT included. DOES NOT FIT THE 007S Version.
£89.99
Eagle Vision Forward Infinity Elevation Adjustable Scope Mount Picatinny 30mm This well-designed scope mount allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. The mount can be used as low profile or adjusted to the high profile too if your scope objective its too close to your rifle barrel or shroud. This practical patent helps shooters who enjoy long-range shooting and often run out of adjustment clicks on their turrets. The mount can also come handy if you have not been able to use your favorite scope due to lack of space between the rings or unusual position of your dovetail or picatinny rail on your gun. We are very proud of this product as it has been becoming a “must have” solution among people who love their bullpups. The design of the mount is dedicated to people who want to improve their performance contrasting with what ordinary mounts allow to do. By keeping the front mount at its lowest and elevating the rear mount to the highest point, you can zero in your gun far beyond what standard mounts allow you to do, without using the clicks on your turrets, hence keeping the optical centre of your scope intact (ideal situation for long range shooting). Exceptionally well presented in the case and finished to a very high quality. Details: Height: 65 mm to 69.5 mm (adjustable) Profil height: 21 mm Adjustable height: 4.5 mm Weight: 92 gm each one Centre of the ring to the bottom of the rail: 38 mm in closed position Centre of the ring to the bottom of the rail: 42.5 mm in open position Ring size: 30 mm In the box 2 x infinity scope mounts 2 x allen key set – different sizes 2 x small spear screws 2 x large spear screws 1 x waterproof case Bubble Gauge NOT Included Do not remove the elevation screws unless the mount is fully raised / in the high / open elevation position or you will damage the mount.
£97.99£94.99
Dovetail To Picatinny Weaver 170mm 11 mm To 22mm Rail Converter This Adaptor allows you to convert your Dovetail rail to Picatinny with less modifications and low profile. After tightening a few screws on the side, the rail will stay tight and secure on the place. 170mm Long 11mm Dovetail to 22mm Picatinny Pack contains 170mm adapter 2x allen key 4x top grab screws (2 different lengths) 2x spare side grab screws 2x spare ends grab screws Better than the cheap Ebay ones, has screws on the side to help secure.
£34.77
Pard NV007 Scope Holder Tube Replacement Night Vision Kit This unit is designed to replace the Pard NV007S tube. PLEASE BE AWARE - THIS S VERSION DOES NOT FIT THE V VERSION PARD. THIS WILL NOT FIT THE PARD NV007 SP - THE NEW MODEL WITH VERTICAL BATTERY. NV007A/V adapters are available - HERE The USH-46 goes over the scope eye relief and requires minimum 20mm / maximum 45mm space. If you have an IR Illuminated switch at the eye relief end, check your measurements. This unit can be connected to 99% of the scopes from eye relief outer with dimension of 40mm to 46.5mm and it will find the centre automatically while you are tightening it. TOTAL length: 69mm Our pard ring length: 24mm Made of aluminium. Package includes: 1 x Universal scope holder USH-46 1 x pard Adaptor ring PR-007S 1 x Storage case 1 x Silicon grease tube Please note: The Pard 007 is NOT included. DOES NOT FIT THE 007A/V
£89.99
Eagle Vision Universal Harmonic Barrel Tuner - Silver STD Front End This is the Standard version of the barrel tuner. This version comes with the caliber adapters that screw into the front end of the tuner - these do not allow the addition of a moderator. The photos show all the finger marks, it actually looks better in real life...photo's don't do it justice. Our new multi-caliber Universal Harmonic Barrel Tuner system can be used in different air rifles with various calibers. The interchangeable caliber adaptor can easily be swapped for another adaptor, with the tools provided. The front caliber adaptor with 8 holes, looks great and is designed so to allow insertion of the stainless steel bar tool, to tighten or loosen the adaptor. There are no moving parts, all components are fully secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping. These products are manufactured by 5 Axis CNC tolerance of + or – 0.05 Product includes: 1x Universal Harmonic Barrel Tuner choice of black or silver 4x O- rings 6x screws 1x Allen key 1/2 UNF X 20 End adapter for rifle connection 1x Allen key 1x waterproof Storage Case 4x piece of caliber specific adaptor .177, .22, .25 and .30 (included 8x stainless steel tool bars)
£78.00
Eagle Vision Universal Harmonic Barrel Tuner - Silver UNF Front End This is the UNF version of the barrel tuner. This version comes with the 4 adapters that screw into the front end of the tuner which allows the addition of a moderator / silencer. The photos show all the finger marks, it actually looks better in real life...photo's don't do it justice. Our new multi-caliber Universal Harmonic Barrel Tuner system can be used in different air rifles with various calibers. The interchangeable caliber adaptor can easily be swapped for another adaptor, with the tools provided - front end UNF adapters Interchangeable end adaptor 1/2 UNF X 20 included. For connection with rifle barrel. There are no moving parts, all components are fully secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping. These products are manufactured by 5 Axis CNC tolerance of + or – 0.05 All our end adaptors can be used with future Eagle Vision sound moderators, muzzle brakes and some harmonic barrel tuner models. Product includes: 1x Universal Harmonic Barrel Tuner in silver 4x O- rings 6x screws 1x Allen key 1/2 UNF X 20 End adapter for rifle connection 2x stainless steel tool bar 1x Allen key 1x waterproof Storage Case 4x piece of 1/2 UNF X 20 caliber specific adaptor .177, .22, .25 and .30 (included 4x stainless steel tool bars) for front end to add moderator / silencer onto.
£78.00
Eagle Vision Infinity Elevation Ajustable Scope Mount 30mm Ring Picatinny IPS-30 This well-designed scope mount allows vertical movement along a guided path, and can be adjusted for low profile, and also for high profile settings. The INFINITY mounts are also lockable in different positions using two screws. INFINITY mounts are ideal for long range shooting and are extensively used for larger objective scopes, increasing space between your scope, barrel or shroud and enabling you to zero in your gun far beyond standard mounts. The design of the mount keeps the front mount lower and elevates the rear mount to a higher position. This in turn, is helpful for long-range shooters who find standard scope mount clicks on their turrets self running and unadjusted. Exceptionally well presented in the case and finished to a very high quality. Details: Height: 68.25 mm to 77.75 mm (adjustable) Profile Height: 23 mm Adjustable Height: 9.5 mm Weight: 81 g each Centre of the ring to the bottom of the rail: 41 mm (in closed position) Centre of the ring to the bottom of the rail: 51.5 mm (in open position) Ring size: 30 mm Rail size: 22 mm picatinny 2 x Alan Keys included Does not include bubble level accessory Do not remove the elevation screws unless the mount is fully raised / in the high / open elevation position or you will damage the mount.
£99.99£83.98
Eagle Vision Infinity Elevation Adjustable Scope Mount 34mm Ring Picatinny INS-34 Special Offer SALE Eagle Vision have designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This well-designed scope mount allows vertical movement along a guided path, and can be adjusted for low profile, and also for high profile settings. The INFINITY mounts are also lockable in different positions using two screws. INFINITY mounts are ideal for long range shooting and are extensively used for larger objective scopes, increasing space between your scope, barrel or shroud and enabling you to zero in your gun far beyond standard mounts. The design of the mount keeps the front mount lower and elevates the rear mount to a higher position. This in turn, is helpful for long-range shooters who find standard scope mount clicks on their turrets self running and unadjusted. Exceptionally well presented in the case and finished to a very high quality. Details: Height - 65mm to 69.5mm ( adjustable ) Profile Height - 21mm Adjustable Height - 4.5mm Weight - 92g each Centre of the ring to the bottom of the rail - 38mm in closed postion Centre of the ring to the bottom of the rail - 42.4mm in open postion Ring Size 34mm Rail size - 20mm Picatinny 2 x Alan Keys Included 4 x Small spare screws 1 x Large spare screw Protection Fabric Waterproof Case Bubble Gauge NOT Included Do not remove the elevation screws unless the mount is fully raised / in the high / open elevation position or you will damage the mount.
£99.99£83.98
Dovetail To Picatinny Weaver 150mm 11 mm To 22mm Rail Converter This Adaptor allows you to convert your Dovetail rail to Picatinny with less modifications and low profile. After tightening a few screws on the side, the rail will stay tight and secure on the place. 150mm Long 11mm Dovetail to 22mm Picatinny Pack contains 1 rail. Better than the cheap Ebay ones, has screws on the side to help secure.
£31.99
Eagle Vision Infinity Elevation Adjustable Scope Mount 30mm Ring Picatinny INS-30 Eagle Vision have designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This well-designed scope mount allows vertical movement along a guided path, and can be adjusted for low profile, and also for high profile settings. The INFINITY mounts are also lockable in different positions using two screws. INFINITY mounts are ideal for long range shooting and are extensively used for larger objective scopes, increasing space between your scope, barrel or shroud and enabling you to zero in your gun far beyond standard mounts. The design of the mount keeps the front mount lower and elevates the rear mount to a higher position. This in turn, is helpful for long-range shooters who find standard scope mount clicks on their turrets self running and unadjusted. Exceptionally well presented in the case and finished to a very high quality. Details: Hight: 60.7mm to 65.7mm (adjustable) Profile Hight: 21mm Adjustable Height: 4.5mm. Weight: 86g each one. Centre of the ring to the bottom of the rail: 36mm (in closed position). Centre of the ring to the bottom of the rail: 40.5mm (in open position). Ring size: 30mm Rail size: 20mm picatinny 2 x Alan Keys Included 4 x Small spare screws 1 x Large spare screw Protection Fabric Waterproof Case Bubble Gauge NOT Included Do not remove the elevation screws unless the mount is fully raised / in the high / open elevation position or you will damage the mount.
£99.99£83.98
Eagle Vision Universal Harmonic Barrel Tuner - Black UNF Front End This is the UNF version of the barrel tuner. This version comes with the 4 adapters that screw into the front end of the tuner which allows the addition of a moderator / silencer. Our new multi-caliber Universal Harmonic Barrel Tuner system can be used in different air rifles with various calibers. The interchangeable caliber adaptor can easily be swapped for another adaptor, with the tools provided - front end UNF adapters Interchangeable end adaptor 1/2 UNF X 20 included. For connection with rifle barrel. There are no moving parts, all components are fully secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping. These products are manufactured by 5 Axis CNC tolerance of + or – 0.05 All our end adaptors can be used with future Eagle Vision sound moderators, muzzle brakes and some harmonic barrel tuner models. Product includes: 1x Universal Harmonic Barrel Tuner in black 4x O- rings 6x screws 1x Allen key 1/2 UNF X 20 End adapter for rifle connection 2x stainless steel tool bar 1x Allen key 1x waterproof Storage Case 4x piece of 1/2 UNF X 20 caliber specific adaptor .177, .22, .25 and .30 (included 4x stainless steel tool bars) for front end to add moderator / silencer onto.
£78.00
Eagle Vision - SIGMA M4 Sound Moderator Interchangeable Caliber (41MM X 174MM) The Sigma Moderator / Silencer comes with 3 interchangeable caliber liners, .177 / .22 / .25 - which allow you to size for your requirements. These are exceptionally well built and great looking mods which work very well on airguns. Lots of spares included and normal high quality Eagle Vision build quality. Our multi-caliber sound moderator system can be used in different air rifles over various calibers. Interchangeable internal liner can be swapped with another caliber liner without opening the moderator with the tools provided. No moving parts, all components are secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping. All parts are manufactured by CNC; Some internal parts have tolerance of + or – 0.02. All our liners can be used with future Eagle Vision sound moderator models. The caliber specific liner reduces the sound level to a minimum. Extra vent holes on the first tube release air pressure from the first to the second chamber. The space between the first and the second tube is pre-wrapped with ballistic fiber felt to reduce sound leaving – it’s also wrapped with stainless steel wired mesh to create a stunning look. The outer groove is designed to release air and give a better grip. Also with an interchangeable end cap. Available caliber liners: .177, .22, .25 use with out liner for 30 and 35 caliber. It can be used with different calibers up to 9mm by removing the liner. Product specifications:Length: 174MMOutside Diameter: 41MMWeight: 240GMuzzle Threads size: 1/2 UNF X 20 Includes 1x Sound Moderator 1x 177 Liner (2x spare o-rings) 14grams 1x 22 Liner (2x spare o-rings) 13 grams 1x 25 Liner (2x spare o-rings) 12grams 1x Tool 1x Storage Case 1x O-ring silicone grease 1x soft bag This silencer / moderator is for Unlicensed Airguns only. We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site.
£167.99
2 X 26mm 13mm Dovetail to Picatinny Adaptor Convertor These are 2 X 26mm 13mm dovetail to Picatinny Adaptor Made from aluminium Choose the right size for your Application. Package includes: 2 x 26mm adapter - Length 2 x Allen key 2 x grab screws 2x spear side screws Profile height 4mm 2 adapters per pack Better than the cheap Ebay ones.
£21.50
NEW - Eagle Vision Pard NV008S / Sytong Mount - Windage + Elevation Adjustable Eaglevision have designed and developed an amazing new Picatinny mount.We are very proud of this product as it’s development resolves some issues for shooters, who depend on the reliability of a solid mount. Main benefits of using this mount: 1. NV scope: It can be directly fitted to the SYTONG vision scope - no need for Sytong Mount. It can be directly fitted to the PARD 008S vision scope - no need for Pard Mount 2. Adjustability:FULLY ADJUSTABLE, FORWARD or BACKWARD , ELEVATION, WINDAGE, EYE RELIEF AND HEIGHT ADJUSTMENT, that allows the scope to move vertically and horizontally along a guided path, and lockable in different positions, using 3x or 4x or 5x screws on the side of this mount. 3. longer range shooting:long range before running out of adjustment on the turretsis the ability for users who need to reach out further but are restricted by their current mounting system.By keeping the front mount at it’s lowest and elevating the rear mount to the highest point you can zero in your gun far beyond, without using the clicks on your turrets, hence keeping the optical centre of your scope intact. 4. Multiple rifles:This system can be used to install scope mounts for the owner’s of multiple rifles who require to use one scope for all of their rigs by installing one Infinity mount to each rifle.They can zero then just swap the scope between them, with little need for turret click adjustment. 6. Durability:This product is robust enough to be installed on heavy recoil rifles, up to .308 caliber. Technical information for the new ‘INFINITY’ mount: Length: 170mmProfile height from bottom of the mount to middle of the top picatinny rail, 21mm.Total height: 30.30mmAdjustable Height: 4.5mmWeight: 225 grams Product includes: 1x Infinity picatinny mount3 x Allen keys, (two different sizes)2 x side screws1x m5 spring screws1x Waterproof case6x aluminium washers M6 to M5 adapter use for Sytong6x read stainless steel M6 washers M6 spacer use for pard 008S Please note:The washers must be placed between the screws and the mount.The washers are flat and once they start being tightened their shape adjusts to the countersunk holes. Washer Fitting Guide is HERE Torque calculation:Adjustable side screws maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.Picatinny nuts maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters. This video is for the earlier version - but the basic setup still applies. Just additional use of the washers with the Pard Screws. Mini Version is now available - click here. Use the separate windage and elevation screw to fine tune the mount. Picatinny Mounting ( purchase optional extra Pic to Dovetail adapter ) Bubble Mount NOT included - Can be purchased separately
£129.99£119.99
Eagle Vision - Two Piece Infinity Elevation Adjustable Scope Mount Picatinny 30mm This well-designed scope mount allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. The mount can be used as low profile or adjust the to high profile too if your scope objective its too close to your rifle barrel or shroud. This practical patent helps shooters who like to shoot long range and often run out of adjustment clicks on their turrets. The mount can also come handy if you have not been able to use your favourite scope due to lack of space between the rings or the odd position of your dovetail or picatinny rail on your gun. We are very proud of this product as it has become a “must have” solution among people who love their bullpups. The design of the mount is dedicated to people who want to improve their performance contrasting with what ordinary mounts allow to do. By keeping the front mount at its lowest and elevating the rear mount to the highest point, you can zero in your gun far beyond what standard mounts allow you to do, without using the clicks on your turrets, hence keeping the optical centre of your scope intact (ideal situation for long range shooting). Details: Height: 65 mm to 69.5 mm (adjustable) Profile Height: 21 mm Adjustable Height: 4.5 mm Weight: 92 g each Centre of the ring to the bottom of the rail: 38 mm in closed position Centre of the ring to the bottom of the rail: 42 mm in open position Ring size: 34 mm Rail size: 22 mm picatinny Item includes: 2x Infinity scope mounts 1x Gift bubble level (random colour) 2x Allen key set – different sizes 4x Small spare screws 2x Large spare screws 1x Waterproof case 1x Lens air pump dust blower Pressure calculation: Ring screws maximum Torque, 15-20 Inch-pounds Force to 1.68-2.25 NM Newton Meters. Adjustable side screws maximum Torque, 53-71 Inch-pounds Force to 6-8 NM Newton Meters. Picatinny nuts maximum Torque, 53-71 Inch-pounds Force to 6-8 NM Newton Meters. Bubble level is a random colour
£107.98
Picatinny to 11mm x 80mm Dovetail Rail Adaptor Converter Ideal for BSA / Air Arms / Daystate Rails 80mm Long 1 adapter per pack Better than the cheap Ebay ones, has screws on the side to help secure.
£24.99£21.50
Picatinny to 13mm x 80mm Dovetail Rail Adaptor Converter 80mm Long 1 adapter per pack Better than the cheap Ebay ones, has screws on the side to help secure.
£21.50
Eagle Vision - MZB-35 Muzzle Brake Air Stripper with Interchangeable caliber 1/2 UNF Fitting Our new multi-caliber muzzle brake air stripper system can be used in different air rifles with various calibers. The interchangeable caliber adaptor can easily be swapped for another adaptor. Interchangeable end adaptor to 1/2 UNF X 20, M14X1.25, M18X1, M20X1 can be swapped between with the tools provided - Included is 1/2 UNF others can be special ordered as extra's. There are no moving parts, all components are fully secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping. These products are manufactured by 5 Axis CNC tolerance of + or – 0.05 All our end adaptors can be used with future Eagle Vision sound moderators, muzzle brakes and harmonic barrel tuner models. The caliber specific adaptor helps to increase accuracy; the holes release air pressure from the sides helping to reduce the recoil. The front caliber adaptor with 8 holes, looks great and is designed so to allow insertion of the stainless steel bar tool, to tighten or loosen the adaptor. Caliber adaptors included:.177, .22, .25 and .30 Product specifications: Length: 90mm Outside diameter: 35mm Weight: 83 End Thread: M23 X 1 Front Threads: M15X0.6 Product includes: 1x Muzzle Brake 1x Storage Case 4x O- rings 6x M3 screws 1x Allen key 1x end adaptor of your choice from options: 1/2 UNF X 20 ring diameter 29 x 2mm 17GR Each ones includes: 2x stainless steel tool bar 1x Allen key 4x piece caliber specific adaptor (SMC) 177 21GR Hole side 6mm 22 20GR Hole side 7mm 25 18GM Hole side 8mm 30. 16GR Hole side 9mm (included 8x stainless steel tool bars) Once fitted / used / fired through this product is regarded as used.
£79.99£77.99
Eagle Vision Pard NV008 Mount - Windage + Elevation Adjustable Mini 125s This is the MINI version of the original Pard mount, only 12.5cm top rail size. Description: We have designed and developed an amazing new Picatinny mount.We are very proud of this product as it’s development resolves some issues for shooters, who depend on the reliability of a solid mount. Main benefits of using this mount: 1. NV scope:It can be directly fitted to the Pard 008 008P 008LRF ( Does NOT fit the Pard NV008S ) 2. Adjustability:FULLY ADJUSTABLE, FORWARD or BACKWARD , ELEVATION, WINDAGE, EYE RELIEF AND HEIGHT ADJUSTMENT, that allows the scope to move vertically and horizontally along a guided path, and lockable in different positions, using 3x or 4x or 5x screws on the side of this mount. 3. Combined with Scope cam:This mount allows users to adjust their scope forward, backwards, or adjust it vertically to align the scope with their eye relief or eye level.Users wishing to use their scope camera and record a session while shouldering their rifle, but the screen needs to be further to their eyes, or, for some applications they might require the camera to be closer to the eyes, such as pard/ Nightvision scopes etc. 4. longer range shooting:long range before running out of adjustment on the turretsis the ability for users who need to reach out further but are restricted by their current mounting system.By keeping the front mount at it’s lowest and elevating the rear mount to the highest point you can zero in your gun far beyond, without using the clicks on your turrets, hence keeping the optical centre of your scope intact. 5. Multiple rifles:This system can be used to install scope mounts for the owner’s of multiple rifles who require to use one scope for all of their rigs by installing one Infinity mount to each rifle.They can zero then just swap the scope between them, with little need for turret click adjustment. Technical information for the new ‘INFINITY’ mount: Length: 12.5cm / Base 12.5cm / Pic Rail 8cmProfile height from bottom of the mount to middle of the top picatinny rail, 21mm.Total height: 30.30mmAdjustable Height: 4.5mmWeight: 175 grams Product includes: 1x Infinity picatinny mount3 x Allen keys, (two different sizes)5 x side screws1x m5 spring screw4x pard 008 attachment screws1x Waterproof case Torque calculation:Adjustable side screws maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.Picatinny nuts maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.
£101.98
FX Wildcat Magazine .177 MK1 + MK2 - Eaglevision Design FX Wildcat aluminium magazine Designed and manufactured by Eagle Vision.Each magazine comes with 4 extra O-rings. Easier to load Holds pellets more secure Smoother rotation Centre ball bearing makes a positive connection Easier to change the O-rings Numbered magazine shot count
£25.20
Eaglevision Pard NV007 A /V Adapter Tube This tube is designed to replace the Pard NV007 A/V tube. This unit will not work alone as it has to be connected to our Pard Adapter Kit Made of aluminium. The size of threads is m42 x 0.6 pitch Length: 24mm Better than the cheap Ebay ones. Example of use - You have purchased a Pard Adapter Kit, with the S connector and you now wish to connect an A/V 007 Pard - this is the part you require to purchase.
£24.99
30mm to 25mm Tube Ring Adaptor This is high quality 30mm to 25mm scope tube adaptor, made of aluminium. Designed To Works With Eagle Vision 30mm Scope Mounts. Bubble Gauge and mount NOT Included
£17.98
FX Impact High Capacity Magazine .22 5.5mm Eaglevision 28 Shot This is a high capacity magazine, designed for the FX Impact platform. It is made from aluminium and cut by CNC machine. Super high quality magazine for the FX Impact Platform. NOTE - This is the equivalent Side Shot magazine, so your Impact must accept the high capacity magazine. Magnetic cover Higher capacity Easy load Secure pellet retention Very smooth rotation Numbered shot count 22 (5.5mm) – 28 shots Maximum Pellet & slugs length 11.5mm flat head 12mm dome head If you are using a modified brass inlet port or the barrel housing is not factory original this may not fit. These are designed to work with the standard FX factory barrel system and brass transfer port. We do not accept returns if the magazine is damaged or scratched due to a non factory transfer port being used.
£107.98
Pard NV008S / Sytong Convertor Rail for Original Mount Own one of the Original Pard NV008 adjustable mounts from Eaglevision - have you upgraded to a new Pard Version NV008S or have the Sytong system. This top rail allows you to change the top rail on the original mount to the new hole configuration. This is only the Pard NV008S / Sytong Rail - you must have the original mount to attach this to. This is for the rail in the picture ONLY. 1x top rail2x allen keys (two different sizes)6x side aluminium washers (not included with NV008, NV008P, NV008LFR) Please note:The washers must be placed between the screws and the mount.The washers are flat and once they start being tightened their shape adjusts to the countersunk holes. See the fitting guide. Click Here.
£29.99
Please confirm that you are 18 years or older to enter the shop.
You are not old enough to visit the shop yet.