FREE SHIPING ON ORDERS OVER £100

Donny FL

DonnyFL: Making silence a priority

DonnyFL manufactures the ultimate airgun suppressors, renowned for their high-end craftsmanship and effectiveness. Created by expert shooting enthusiast and Saber Tactical co-owner, Donny Du, the brand prides itself on “making silence a priority” for everyone from the backyard hobby beginner to the competition shooter. Expect in-depth product knowledge and topnotch customer service along with superb quality and reliability.

Airgun Use Only

20 products


  • DonnyFL - Muzzle Break QD M84 - Quick Disconnect DonnyFL - Muzzle Break QD M84 - Quick Disconnect

    Donny FL DonnyFL - Muzzle Break QD M84 - Quick Disconnect

    In stock

    DonnyFL - Muzzle Break QD M84 - Quick Disconnect This muzzle brake or air stripper attaches to the front of any air rifle equipped with a DonnyFL Quick Disconnect Adapter. The thread for the adapter is 1/2 Inch UNF - thats the bit that goes on the end of the barrel. Features: Made of aluminum 6061 T6 Black anodize Weights 2.9 oz Comes with M58 Air Stripper Insert Kit. - 2 x .177/.22 - 2 x .22/.25 - 2 x .25/.30 Approx 4.5 cm wide Approx 6.5cm long This silencer / moderator / muzzle break is for Unlicensed Airguns only. We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. If your require the .25 - .30 Stripper contact us for production of FAC

    In stock

    £128.99

  • Donny FL - T Shirt - RED

    Donny FL Donny FL - T Shirt - Red or Black

    In stock

    Donny FL - T Shirt - Red or Black Donny FL T'Shirt Worn worldwide by Airgunner's who know a quality moderator and product. Available in Red or Black. Available for the first time direct in the UK. Features: 100% combed ring-spun cotton 4.3 oz Super Soft Baby rib-knit set collar Size Guide - In INCHES  SIZE IN INCHES S M L XL 2 XL 3XL 4XL Body Length at Back 28 2 30 31 32 33 34 Chest Width 17 19 20 22 25 26 27 BODY LENGTH AT BACK Measured from high point shoulder to finished hem at the back CHEST WIDTH Measured across the chest one inch below the armhole when laid flat International Shipping If you do NOT see your country listed on checkout, please email us and we will happily provide you a quote. We do recommend you always select tracked postage, we are not liable for any loss in items sent worldwide if you choose cheap uninsured postage. Therefore we alway recommend tracked postage. We do ship clothing to countries outside of the UK and EU. We do restrict other Gun accessories - thus if you attach anything other than clothing or scope stickers your order will NOT be shipped.

    In stock

    £15.99

  • DonnyFL Fat Boy 2.0 Silencer - .177 - .30 Calibre 1/2x20Unf DonnyFL Fat Boy 2.0 Silencer - .177 - .30 Calibre 1/2x20Unf Box

    Donny FL DonnyFL Fat Boy 2.0 Silencer - .177 - .22 Calibre 1/2x20Unf

    In stock

    DonnyFL Fat Boy 2.0 Silencer - .177 - .22 Calibre 1/2x20 UNF THIS DOES NOT SHIP WITH THE .25 - .30 STRIPPER - see below. The return of the beloved Fatboy! In the 2.0 version, we gave this Campbell soup can a face lift. New outer shell design along with interchangeable calibers from .177 to .22. Shooters who wanted something short yet effective, the fatboy will surprise you. Features: Compatible with .177 to .22 calibers - we DO NOT Include the .25 - .30 adapter. Strippers included .177 - .22 / .22 - .25  Includes 2 interchangeable air strippers Redesigned 1/2 x 20 rear cap for easy gripping Can be used with our 6.25 inch extender for more hush power Measure 4.25 inches long by 2 inches in diameter Weighs only 6.7 oz  This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. If your require the .25 - .30 Stripper contact us for production of FAC

    In stock

    £147.99

  • Sale -£9.00 DonnyFL - RYU Quick Release 22 Silencer - .22 Calibre 1/2x20Unf DonnyFL - RYU Quick Release 22 Silencer - .22 Calibre 1/2x20Unf Modular Parts

    Donny FL DonnyFL - RYU Quick Release 22 Silencer - .22 Calibre 1/2x20Unf

    In stock

    DonnyFL - RYU Quick Release 22 Silencer - .22 Calibre 1/2x20Unf 1.2” DIAMETER Introducing DonnyFLs Quick Disconnect moderators. These precision-engineered moderators feature a quick detach system, ensuring consistent shooting performance with no point-of-impact changes after detaching and re-attaching. These moderators are caliber specific compared to previous versions. Crafted from high-grade aluminium, theyre robust and modular to adapt to your shooting needs. Main Features Indexed locking system for consistent position and no point of impact changes. Quick detachment for easy storage and reattachment for shooting. Comes with a 1/2 x 20 female (barrel/shroud) thread adapter. Modular design for length adjustment. Crafted from 6061 T6 aluminium (individual sections) and 7075 aluminium (main QD housing and adapter).   This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings.

    In stock

    £183.99£174.99

  • DonnyFL - Quick Disconnect (QD) Rear Caps and Adapter for Old Moderators DonnyFL - Quick Disconnect (QD) Rear Caps and Adapter for Old Moderators adapter example

    Donny FL DonnyFL - Quick Disconnect (QD) Rear Caps and Adapter for Old Moderators

    In stock

    DonnyFL - Quick Disconnect (QD) Rear Caps and Adapter for Old Moderators If you own a Sumo, Tatsu, Ronin, Shogun, Tanto, Emperor or FX DonnyFl moderator and want to convert it to a QD. This conversion kit will allow you to do so. Compatibility: Will not work on old moderators with the flat front cap. Features: Indexed so it locks on at same position every time Made of 7075 aluminum Grey anodized Includes barrel/shroud adapter and rear cap Select the barrel thread specific to your airgun Sizes Available - you need to select one, it's one size adapter per order. Sumo/Tatsu/Shogun - 1/2 x 20 M71 Tanto/KOI 1/2 x 20 M73 Ronin/Emperor/Fatboy2.0 1/2 x 20 M72 Ronin/Emperor/Fatboy2.0 M18x1 M86 FX DonnyFL 1/2 x 20 M74 FX DonnyFL M18x1 M87  QD Thread Adapters ONLY  QD Thread Adapter Only  M18x1 M76 QD Thread Adapter Only M20x1 M77 QD Thread Adapter Only 1/2Unf M78 This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings.

    In stock

    £24.99 - £62.99

  • Sale -£7.00 DonnyFL - Yokozuna Quick Release 25 Silencer - .25 Calibre 1/2x20Unf DonnyFL - Yokozuna Quick Release 25 Silencer - .25 Calibre 1/2x20Unf parts

    Donny FL DonnyFL - Yokozuna Quick Release 25 Silencer - .25 Calibre 1/2x20Unf

    In stock

    DonnyFL - Yokozuna Quick Release 25 Silencer - .25 Calibre 1/2x20Unf 1.6” DIAMETER Introducing DonnyFLs Quick Disconnect moderators. These precision-engineered moderators feature a quick detach system, ensuring consistent shooting performance with no point-of-impact changes after detaching and re-attaching. These moderators are caliber specific compared to previous versions. Crafted from high-grade aluminum, theyre robust and modular to adapt to your shooting needs. Main Features Indexed locking system for consistent position and no point of impact changes. Quick detachment for easy storage and reattachment for shooting. Comes with a 1/2 x 20 female (barrel/shroud) thread adapter. Modular design for length adjustment. Crafted from 6061 T6 aluminium (individual sections) and 7075 aluminium (main QD housing and adapter).   This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings.

    In stock

    £198.99£191.99

  • DonnyFL FX Airgun Pro Size 22-25 Silencer - .177 - .22 Calibre 1/2x20UNF DonnyFL FX Airgun Pro Size 22-25 Silencer - .177 - .22 Calibre 1/2x20UNF side view

    Donny FL DonnyFL FX Airgun Pro Size 22-25 Silencer - .177 - .22 Calibre 1/2x20UNF

    In stock

    DonnyFL FX Airgun Pro Size 22-25 Silencer - .177 - .22 Calibre 1/2x20UNF This is a custom size that comes with your FX airguns if you decide to upgrade the suppressor. Same length as the Tanto but slightly larger in diameter, comparable to the FX factory suppressor. This weights around 4.7 ounces. Comes with protective red tube for easy transport and storage. Built in collaboration with FX Airguns the airgun pro silencer offers maximum performance in a compact package. Available in .22-25 & .25-30 Precision cncd Approx weight 4.5 oz Mono-core design to increase accuracy and limit the chances of pellet clipping Sand blasted and anodized for maximum durability Comes pre-wrapped in felt Customizable - you can further dampen the sound Take apart in less than 10 seconds 1.36 x 5 inches As Donny FL moderators screw onto the shroud of your FX Airgun, DonnyFL would recommend going a size up when choosing your moderator. For example, if youre looking for a .177 DonnyFL would recommend using a .22. or if youre looking .25, you should opt for a .30 This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings.

    In stock

    £128.99

  • DonnyFL Sumo Size 25 Silencer - .22 Calibre 1/2x20Unf DonnyFL Sumo Size 25 Silencer - .22 Calibre 1/2x20Unf side view

    Donny FL DonnyFL Sumo Size 25 Silencer - .22 Calibre 1/2x20Unf

    In stock

    DonnyFL Sumo Size 25 Silencer - .22 Calibre 1/2x20Unf This will be your favorite LDC. Why Sumo? Rear endcaps are swappable and available in different thread types Mono-core design to increase accuracy & limit the chances of pellet clipping No moving parts or epoxy that may become loose after 1000's of rounds Precision CNC'd by professional machinist Sand blasted and anodized for maximum durability Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No hex key or torch needed when you want to perform maintenance inside the unit. Customizable, you can further dampen the sound by wrapping the interior tube with different sound absorbing materials. Comes pre-wrapped in felt Machined grooves on the outside for easy handling. Weight 5.6 oz Comes with protective red tube for easy transport and storage. *Note: If you see white lines on the inside of the front cap, that's ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. As Donny FL moderators screw onto the shroud of your FX Airgun, DonnyFL would recommend going a size up when choosing your moderator. For example, if youre looking for a .177 DonnyFL would recommend using a .22. or if youre looking .25, you should opt for a .30 This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site.

    In stock

    £149.99

  • DonnyFL FX Airgun Pro Size 25-30 Silencer - .22 - .25 Calibre 1/2x20UNF DonnyFL FX Airgun Pro Size 25-30 Silencer - .22 - .25 Calibre 1/2x20UNF side view

    Donny FL DonnyFL FX Airgun Pro Size 25-30 Silencer - .22 - .25 Calibre 1/2x20UNF

    In stock

    DonnyFL FX Airgun Pro Size 25-30 Silencer - .22 - .25 Calibre 1/2x20UNF This is a custom size that comes with your FX airguns if you decide to upgrade the suppressor. Same length as the Tanto but slightly larger in diameter, comparable to the FX factory suppressor. This weights around 4.7 ounces. Comes with protective red tube for easy transport and storage. Built in collaboration with FX Airguns the airgun pro silencer offers maximum performance in a compact package. Available in .22-25 & .25-30 Precision cncd Approx weight 4.5 oz Mono-core design to increase accuracy and limit the chances of pellet clipping Sand blasted and anodized for maximum durability Comes pre-wrapped in felt Customizable - you can further dampen the sound Take apart in less than 10 seconds 1.36 x 5 inches As Donny FL moderators screw onto the shroud of your FX Airgun, DonnyFL would recommend going a size up when choosing your moderator. For example, if youre looking for a .177 DonnyFL would recommend using a .22. or if youre looking .25, you should opt for a .30 This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings.

    In stock

    £128.99

  • Sale -£4.00 DonnyFL - RYU Quick Release 25 Silencer - .25 Calibre 1/2x20Unf DonnyFL - RYU Quick Release 25 Silencer - .25 Calibre 1/2x20Unf Parts

    Donny FL DonnyFL - RYU Quick Release 25 Silencer - .25 Calibre 1/2x20Unf

    In stock

    DonnyFL - RYU Quick Release 25 Silencer - .25 Calibre 1/2x20Unf 1.2” DIAMETER Introducing DonnyFLs Quick Disconnect moderators. These precision-engineered moderators feature a quick detach system, ensuring consistent shooting performance with no point-of-impact changes after detaching and re-attaching. These moderators are caliber specific compared to previous versions. Crafted from high-grade aluminium, theyre robust and modular to adapt to your shooting needs. Main Features Indexed locking system for consistent position and no point of impact changes. Quick detachment for easy storage and reattachment for shooting. Comes with a 1/2 x 20 female (barrel/shroud) thread adapter. Modular design for length adjustment. Crafted from 6061 T6 aluminium (individual sections) and 7075 aluminium (main QD housing and adapter).   This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings.

    In stock

    £183.99£179.99

  • DonnyFL Tatsu Size 22 Silencer - .177 Calibre 1/2x20Unf DonnyFL Tatsu Size 22 Silencer - .177 Calibre 1/2x20Unf Sde View

    Donny FL DonnyFL Tatsu Size 22 Silencer - .177 Calibre 1/2x20Unf

    In stock

    DonnyFL Tatsu Size 22 Silencer - .177 Calibre 1/2x20Unf Tatsu, or Dragon in Japanese, will be a great addition for shooters who need to take the bark out of their gun yet keep the overall length short. This is a smaller version of the popular Sumo.  As Donny FL moderators screw onto the shroud of your FX Airgun, DonnyFL would recommend going a size up when choosing your moderator. For example, if youre looking for a .177 DonnyFL would recommend using a .22. or if youre looking .25, you should opt for a .30 Available in .177/.22, .22/.25 and .25/.30 Mono-core design to increase accuracy and limit the chances of pellet clipping Precision CNC'd by professional machinist Sand blasted and anodized for maximum durability Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No hex key or torch needed to perform maintenance. Comes pre-wrapped in felt Machined grooves on the outside for easy handling. Weight is just 4.1 oz 1.6 x 4.25 inches Comes with protective red tube for easy transport and storage. This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings.

    In stock

    £128.99

  • DonnyFL Tatsu Size 25 Silencer - .22 Calibre 1/2x20Unf DonnyFL Tatsu Size 25 Silencer - .22 Calibre 1/2x20Unf Side View

    Donny FL DonnyFL Tatsu Size 25 Silencer - .22 Calibre 1/2x20Unf

    In stock

    DonnyFL Tatsu Size 25 Silencer - .22 Calibre 1/2x20Unf Tatsu, or Dragon in Japanese, will be a great addition for shooters who need to take the bark out of their gun yet keep the overall length short. This is a smaller version of the popular Sumo.  As Donny FL moderators screw onto the shroud of your FX Airgun, DonnyFL would recommend going a size up when choosing your moderator. For example, if youre looking for a .177 DonnyFL would recommend using a .22. or if youre looking .25, you should opt for a .30 Available in .177/.22, .22/.25 and .25/.30 Mono-core design to increase accuracy and limit the chances of pellet clipping Precision CNC'd by professional machinist Sand blasted and anodized for maximum durability Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No hex key or torch needed to perform maintenance. Comes pre-wrapped in felt Machined grooves on the outside for easy handling. Weight is just 4.1 oz 1.6 x 4.25 inches Comes with protective red tube for easy transport and storage. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site.

    In stock

    £128.99

  • DonnyFL Tanto Size 25 Silencer - .22 Calibre 1/2x20Unf DonnyFL Tanto Size 25 Silencer - .22 Calibre 1/2x20Unf side view

    Donny FL DonnyFL Tanto Size 25 Silencer - .22 Calibre 1/2x20Unf

    In stock

    DonnyFL Tanto Size 25 Silencer - .22 Calibre 1/2x20Unf Tanto had been the missing member of the DonnyFL collection. It's a shorter version of the KOI but don't let the size fool you. As Donny FL moderators screw onto the shroud of your FX Airgun, DonnyFL would recommend going a size up when choosing your moderator. For example, if youre looking for a .177 DonnyFL would recommend using a .22. or if youre looking .25, you should opt for a .30 Mono-core design Precision CNC’ed by professional machinist Sand blasted and anodized for maximum durability Swappable rear end caps for 1/2 x 20 Bolt, FX (M20x1) Bolt ,1/2 x 20 Cone, Vulcan M14x1.25 and Diana Skyhawk M12x1.25 - Swappable caps NOT INCLUDED Comes pre-wrapped in felt Machined grooves on the outside for easy handling Comes with protective red tube for easy transport and storage. Ships with flat end cap both ends. This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings.

    In stock

    £97.99

  • DonnyFL Tanto Size 22 Silencer - .177 Calibre 1/2x20Unf DonnyFL Tanto Size 22 Silencer - .177 Calibre 1/2x20Unf side view

    Donny FL DonnyFL Tanto Size 22 Silencer - .177 Calibre 1/2x20Unf

    In stock

    DonnyFL Tanto Size 22 Silencer - .177 Calibre 1/2x20Unf Tanto had been the missing member of the DonnyFL collection. It's a shorter version of the KOI but don't let the size fool you. As Donny FL moderators screw onto the shroud of your FX Airgun, DonnyFL would recommend going a size up when choosing your moderator. For example, if youre looking for a .177 DonnyFL would recommend using a .22. or if youre looking .25, you should opt for a .30 Mono-core design Precision CNC’ed by professional machinist Sand blasted and anodized for maximum durability Swappable rear end caps for 1/2 x 20 Bolt, FX (M20x1) Bolt ,1/2 x 20 Cone, Vulcan M14x1.25 and Diana Skyhawk M12x1.25 - Swappable caps NOT INCLUDED Comes pre-wrapped in felt Machined grooves on the outside for easy handling Comes with protective red tube for easy transport and storage. Ships with flat end cap both ends. This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings.

    In stock

    £97.99

  • Sale -£1.00 DonnyFL - Fat Boy 2.0 Muzzle Brake M51 DonnyFL - Fat Boy 2.0 Muzzle Brake M51 fitted example

    Donny FL DonnyFL - Fat Boy 2.0 Muzzle Brake M51

    In stock

    DonnyFL - Fat Boy 2.0 Muzzle Brake M51 This muzzle brake or air stripper screws onto the front of the Fat Boy.  Note: This unit does not come with the individual air strippers. You can change the caliber size by using the inserts that was included with the fat boy. Features: Made of aluminum 6061 T6 Black anodize Weights 2.9 oz This silencer / moderator muzzle break is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. If your require the .25 - .30 Stripper contact us for production of FAC

    In stock

    £38.99£37.99

  • Sale -£0.50 DonnyFL Fat Boy 2.0 Extender Tube 1/2x20 DonnyFL Fat Boy 2.0 Extender Tube 1/2x20 fitted example

    Donny FL DonnyFL - Fat Boy 2.0 Extender Tube 1/2x20 ( Extender Only )

    In stock

    DonnyFL - Fat Boy 2.0 Extender Tube 1/2x20 ( Extender Only ) Need to make the fat boy quieter? You can add this 3 inch extender to capture more air and reduce the muzzle blast some more.  Features: 6061 T6 Aluminum Black anodize Matching outer tube design to the fat boy Also compatible with the Ronin and Emperor These arrive in bubble wrapping / OEM - no fancy box. This silencer / moderator extender is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. If your require the .25 - .30 Stripper contact us for production of FAC

    In stock

    £51.99£51.49

  • DonnyFL Sumo Size 22 Silencer - .177 Calibre 1/2x20Unf DonnyFL Sumo Size 22 Silencer - .177 Calibre 1/2x20Unf side view

    Donny FL DonnyFL Sumo Size 22 Silencer - .177 Calibre 1/2x20Unf

    In stock

    DonnyFL Sumo Size 22 Silencer - .177 Calibre 1/2x20Unf This will be your favorite LDC. Why Sumo? Rear endcaps are swappable and available in different thread types Mono-core design to increase accuracy & limit the chances of pellet clipping No moving parts or epoxy that may become loose after 1000's of rounds Precision CNC'd by professional machinist Sand blasted and anodized for maximum durability Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No hex key or torch needed when you want to perform maintenance inside the unit. Customizable, you can further dampen the sound by wrapping the interior tube with different sound absorbing materials. Comes pre-wrapped in felt Machined grooves on the outside for easy handling. Weight 5.6 oz Comes with protective red tube for easy transport and storage. *Note: If you see white lines on the inside of the front cap, that's ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. As Donny FL moderators screw onto the shroud of your FX Airgun, DonnyFL would recommend going a size up when choosing your moderator. For example, if youre looking for a .177 DonnyFL would recommend using a .22. or if youre looking .25, you should opt for a .30 This silencer / moderator is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site.

    In stock

    £149.99

  • DonnyFL - Skout Epoch Adapter M18x1 A112 DonnyFL - Skout Epoch Adapter M18x1 A112 on rifle

    Donny FL DonnyFL - Skout Epoch Adapter M18x1 A112

    In stock

    Skout Epoch Adapter M18x1 A112 If you decide not to use the factory Skout moderator, use this adapter to allow you to screw on a different moderator with 1/2 x 20 threads. Features: 6061 Aluminum Black anodize Knurled thread protector Made for the .357 caliber Skout   This silencer / moderator adapter is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site.

    In stock

    £39.99

  • Edgun R3M and R3 Degasser Tool M39

    Donny FL Edgun R3M and R3 Degasser Tool M39

    In stock

    Edgun R3M and R3 Degasser Tool M39 Product description This tool makes degassing the Edgun R3M and R3 safe and easy. It also acan also be used to pull out the regulator. Instructions: before screwing the tool onto the Edgun, back out the screw a little to allow the valve pin to go into the tool.  screw the tool onto the valve Using the blue knob slowly screw into valve pin. You'll start to hear a hissing noise and that's the air being released.  once empty, your gauge should be down to zero to remove the regulator, make sure the gun is completely empty. Unscrew the screws holding the regulator in place. Once all the screws are out, screw the degasser tool onto the valve and pull it out of the air tube WE SUPPLY NO INSTRUCTIONS, THE ITEM ARRIVES IN A CLEAR BAG - WE ARE NOT RESPONSIBLE FOR ANY HARM OR DAMAGE TO YOU OR ANY OTHER PERSON OR ITEM WHEN USING THIS PRODUCT. 

    In stock

    £55.00

  • DonnyFL - Skout Epoch Adapter 1/2 x 20 A108 DonnyFL - Skout Epoch Adapter 1/2 x 20 A108 on rifle

    Donny FL DonnyFL - Skout Epoch Adapter 1/2 x 20 A108

    Out of stock

    Skout Epoch Adapter 1/2 x 20 A108 If you decide not to use the factory Skout moderator, use this adapter to allow you to screw on a different moderator with 1/2 x 20 threads. Features: 6061 Aluminum Black anodize Knurled thread protector Compatible up to .30 caliber   This silencer / moderator adapter is for Unlicensed Airguns only.  We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site.

    Out of stock

    £39.99

© 2024 Airgun101 Shop,

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Union Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account