Ideal Scopes to put on your Airgun - with some also ideal for Powder Burning - Best Brands such as Element Optics suitable for all budgets - BUY Now
Airgun / Rifle Scopes
Wulf WULF Fireball 2-7x32 SFP AO Half Mil-Dot MRAD Rifle Scope
WULF Fireball 2-7x32 SFP AO Half Mil-Dot MRAD Rifle Scope Adjustable Objective 5 Yards Minimum Half Mil-Dot Reticle 0.1 MRAD Clicks If you are looking for a partnership for your Air Rifle or Rimfire, the Fireball range from WULF has you covered. These are great for entry level shooters and match quality standards of some of the bigger names. These quality entry-level optics come with a 1-inch tube, an adjustable objective down to 5yds ( as printed on scope ) , a second focal plane half mil-dot reticle and fully multi-coated crystal lenses that provide the shooter with some of the best optics available at this price point. Features 1-inch Aluminium Main Tube Second Focal Plane Half Mil-Dot Reticle Fast Focus Eyepiece 37.5 MRAD (130 MOA) Internal Adjustment Fully Multi-Coated Crystal Lenses Adjustable Objective down to 5 Yards Nitrogen Purged Waterproof Shockproof Fogproof Capped Low Profile Turrets All Calibre Rated WULF Titanium Lifetime Warranty Specifications Magnification Range: 2-7x Objective Lens Diameter: 32mm Tube Diameter: 1 inch F.O.V. @ 100yds: 43.2’-13.5’ Eye Relief: 95mm (3.7 inch) Reticle: Half Mil-Dot Reticle Focal Plane: Second Focal Plane (SFP) Click Value: 0.1 MRAD Total Elevation/Windage Adjustment Range: 37.5 MRAD (130 MOA ) Length (Inch): 11.3 Parallax: 5 YDS - ∞ Warranty: WULF Titanium Lifetime Warranty Highest Magnification 1x-10x Minimum Parallax 5yd-∞ Objective Lens Diameter 32mm Reticle Plane Second Tube Diameter 1 inch Turret Click Value 0.1 MRAD (cm) In The Box WULF Fireball 2-7x32 SFP Non-Illuminated Half Mil-Dot Rifle Scope. Optical Grade Yellow Tint Bikini Lens Covers Wulf Lens Cleaning Cloth Instruction Manual We do not ship this product outside of England, Scotland and Wales.
£64.95£55.95
-
Element Optics Element Optics - Helix 4-16x44 FFP APR-1C MRAD
Element Optics - Helix 4-16x44 FFP APR-1C MRAD The latest addition to the Element Optics lineup, the 4-16x44 Helix FFP offers all the brilliant features and rugged reliability that the 6-24x50 does, but with a distinct advantage: This is the lightest, most compact scope Element have made to date. 30mm Main Body Tube Compact, Lightweight design First Focal Plane Reticle Aircraft Grade Aluminium Side Parallax: 15yds-Infinity Fully Multi-Coated Lenses Tool-free Resettable Turrets with 6 MRAD / 15 MOA per Revolution Hard Mechanical Zero-Stop Removable Magnification Throw Lever Waterproof, Fogproof, Shockproof & Nitrogen Purged Sunshade, Lens Cloth & Rubber Lens Caps included MAGNIFICATION RANGE 4-16x TUBE DIAMETER 30mm OBJECTIVE LENS DIAMETER 44mm EXIT PUPIL 13.5-3.3mm EYE RELIEF 3.7 Inches FIELD OF VIEW @100yds: 26.2-6.55ft CLICK VALUE 1/4 MOA (15 MOA / REV) 1/10 MRAD (6 MRAD / REV) ELEVATION ADJUSTMENT RANGE 80 MOA 23.3 MRAD WINDAGE ADJUSTMENT RANGE 45 MOA 13.1 MRAD MINIMUM PARALLAX 15 YDS 15 METERS LENGTH 14.2 Inches 360 mm WEIGHT 23.8oz 675g Warranty - Aftersales - Service - Please visit - https://element-optics.com/warranty/ Lifetime Warranty is with Element Optics. Retailer is unable to repair / authorise repair via third party. Within 30 days of purchase returns will be sent to Element Optics for testing. All scopes are serial numbered and tested at departure and FX Factory. WE DO NOT SHIP THESE ITEMS TO ANY ADDRESS OUTSIDE THE UK - IF YOU CHECKOUT WE WILL REFUND THE PURCHASE - ANY LOSS OF EXCHANGE CURRENCY IS DOWN TO THE PURCHASER.
£405.99
-
Richter Optik Richter Optik Scope 6-24x50 AOE Illuminated
Richter Optik Scope 6-24x50 AOE Illuminated The Richter Exact Range of scopes are packed full of features and are perfect for multiple shooting scenarios including hunting, target shooting and airgun target and pest control shooting. FREE flip up scope covers Parallax 25y to infinity ¼ MOA windage and elevation adjustments Mil-Dot reticle Illuminated reticle with 11 brightness settings. Battery included. Adjustable zoom Fast focus eyebell High-strength aluminium casings Anti-corrosion protection Fully coated, anti-reflective lenses 40.5cm approx length Richter Scopes offer top quality optics at extremely reasonable prices. Clear, crisp imagery and strong build quality does not need to cost the earth. Richter Scopes are made in China by a specialist optical and electrical manufacturer, using the latest and most advanced CNC equipment available. The factory strives for excellence through continuous product research and development, adopting advanced optics technologies and offering a professional service.
£84.99£79.99
-
Richter Optik Richter Optik 3-9x40 Mil Dot Dynamic Zoom Airgun Scope
Richter Optik 3-9x40 Mil Dot Dynamic Zoom Airgun Scope Ideal as a basic hunting / target scope. Tube Size: 1" Weight: 382grams Length: 320mm Mounts NOT Included Reticle: Mil Dot PX Adjustment: PX Preset to 100 metres. Minimum Focus (On Full Magnification): approx. 15 metres. Lens Covers Supplied: Flip Up Lens Covers. Turrets: Finger adjustable turrets under caps. Richter Scopes offer top quality optics at extremely reasonable prices. Clear, crisp imagery and strong build quality does not need to cost the earth. Richter Scopes are made in China by a specialist optical and electrical manufacturer, using the latest and most advanced CNC equipment available. The factory strives for excellence through continuous product research and development, adopting advanced optics technologies and offering a professional service.
£34.99
-
Immersive Optics Immersive Optics 5x24 MILDOT RAPID w/MOA ADJ MOUNTS
Immersive Optics 5x24 MILDOT RAPID w/MOA ADJ MOUNTS Manufacturer states - This optic has a 45mm eye relief, so may be used with a recoil weapon. The Immersive Optics 5x24 day scope offers high accuracy shooting within a highly compact format.Using a prism based optical system, the 5x24 ' s size can be immediately reduced, eliminating a traditionally large objective lens and exceedingly long housing & eye-relief. This is done without sacrificing the scopes light-gathering performance, field of view or magnification.The implementation of this new prismatic design not only allows the 5x24 to maintain a high optical output and a minimal size, but also a reduced bulk and weight, which results in a better balance for whichever shooting platform the scope is mounted on. This optimisation means that a shooter can aim for longer without fatiguing.Offers up to 2x wider field of view when compared to traditional sights and can focus down to a distance of 6m for close-range shooting.The 5x24 has a glass-etched illuminated mildot or mildot rapid reticle (see individual models), high precision windage & elevation controls (no parallax) and comes with a MOA adjustable mount.This scope is fitted with ED (Extra-Low Dispersion) glass which helps to maintain natural colour reproduction within the observable field of view, minimising chromatic aberration (colour fringing), resulting in high clarity, picture-perfect results even at long distances.All Immersive Optics day scopes feature an innovative eye-relief and lens cap retention system which allows these aspects to be quickly and easily held securely out of the way.All Immersive Optics scopes have CNC machined housings for zero-errors, with optical channels being nitrogen-filled for anti-fogging and sealed against water for maximum quality of use.This optic can be used with rifles with moderate to no recoil, a great choice for airgun shooters. This is a video if the standard 5x30 Immersive Optics. In brief Immersive Optics Feature: Prismatic design Compact size Lightweight Short eye-relief High magnification Wider field of view (when compared to traditional sights) ED glass for high clarity Highly focusable No parallax Illuminated reticles MOA adjustable mounts available Innovative eye-relief & lens cap retention system Better gun/scope weight distribution Reduced shooter fatigue For rifles with moderate to no recoil CNC machined precision mechanics 0.1 mill turrets to match mildot reticles Adjustable elevation & windage (MIL 28 | MOA 83) Precise rotations (MIL 5 | MOA 15) & revolutions (Clicks 50) Nitrogen-Filled optical channel (Anti-Fogging) Waterproof Shock-Resistant (600G) Powered by 1x CR2032 battery 3 Year Warranty
£239.95
-
Immersive Optics Immersive Optics 5x24 MILDOT w/MOA ADJ MOUNTS
Immersive Optics 5x24 MILDOT w/MOA ADJ MOUNTS Manufacturer states - This optic has a 45mm eye relief, so may be used with a recoil weapon. The Immersive Optics 5x24 day scope offers high accuracy shooting within a highly compact format.Using a prism based optical system, the 5x24 ' s size can be immediately reduced, eliminating a traditionally large objective lens and exceedingly long housing & eye-relief. This is done without sacrificing the scopes light-gathering performance, field of view or magnification.The implementation of this new prismatic design not only allows the 5x24 to maintain a high optical output and a minimal size, but also a reduced bulk and weight, which results in a better balance for whichever shooting platform the scope is mounted on. This optimisation means that a shooter can aim for longer without fatiguing.Offers up to 2x wider field of view when compared to traditional sights and can focus down to a distance of 6m for close-range shooting.The 5x24 has a glass-etched illuminated mildot or mildot rapid reticle (see individual models), high precision windage & elevation controls (no parallax) and comes with a MOA adjustable mount.This scope is fitted with ED (Extra-Low Dispersion) glass which helps to maintain natural colour reproduction within the observable field of view, minimising chromatic aberration (colour fringing), resulting in high clarity, picture-perfect results even at long distances.All Immersive Optics day scopes feature an innovative eye-relief and lens cap retention system which allows these aspects to be quickly and easily held securely out of the way.All Immersive Optics scopes have CNC machined housings for zero-errors, with optical channels being nitrogen-filled for anti-fogging and sealed against water for maximum quality of use.This optic can be used with rifles with moderate to no recoil, a great choice for airgun shooters. This is a video if the standard 5x30 Immersive Optics. In brief Immersive Optics Feature: Prismatic design Compact size Lightweight Short eye-relief High magnification Wider field of view (when compared to traditional sights) ED glass for high clarity Highly focusable No parallax Illuminated reticles MOA adjustable mounts available Innovative eye-relief & lens cap retention system Better gun/scope weight distribution Reduced shooter fatigue For rifles with moderate to no recoil CNC machined precision mechanics 0.1 mill turrets to match mildot reticles Adjustable elevation & windage (MIL 28 | MOA 83) Precise rotations (MIL 5 | MOA 15) & revolutions (Clicks 50) Nitrogen-Filled optical channel (Anti-Fogging) Waterproof Shock-Resistant (600G) Powered by 1x CR2032 battery 3 Year Warranty
£253.95
-
Primary Arms Primary Arms Classic Series 3-9x44 SFP Scope Duplex Reticle
Primary Arms Classic Series 3-9x44 SFP Scope Duplex Reticle The Classic Series proves that entry-level optics dont have to be poor quality optics. Unlike some other brands, we dont use the word value as a euphemism for junk. CLx scopes are perfect for the budget conscious and the new shooter. We take the time to 100% inspect every product in our facility here in Houston to ensure you are receiving the best quality product as our other three tiers. These scopes are backed by the same excellent customer service and support as all other Primary Arms products. The Primary Arms 3-9x44 SFP Classic Scope combines traditional features with great value. Its simple design features a 30mm main tube, finger adjustable turrets protected by turret caps, a quick adjust ocular, and a simple duplex crosshair reticle. The second focal plane design keeps the reticle the same size at any magnification. The 3-9x44 SFP Classic Scope is a great basic rifle scope for rimfire up to 5.56 NATO caliber. With a generous eye relief of 3.8 inches and an exit pupil of 11.5mm to 3.1mm depending on magnification setting, the 3-9x44 SFP Classic Scope presents a quick, crisp sight picture that outclasses other entry level rifle scopes. Thin Edge Technology provides a consistently clear sight picture from edge to edge. The glass clarity and unobstructed field of view makes plinking, target shooting, or hunting small game a joy. Yet the 3-9x44 SFP Classic costs less than the competitionin fact, it is the most affordable optic Primary Arms has ever made. Waterproof, fog resistant, nitrogen purged, and featuring fully multi-coated lenses, the 3-9x44 SFP Classic Scope comes complete with lens covers. Reticle: Duplex Reticle Position: Second Focal Plane Tube Size: 30mm Illumination: Non-Illuminated Click Value: 1/4 MOA Side Parallax: N/A Field of View: Low: 38.4 ft / High: 12.6 ft Eye Relief: Low: 3.6 in / High: 3.8 in
£99.99£74.99
-
Wulf WULF Hurricane 4.5-18x50 SFP Half Mildot MRAD Rifle Scope
WULF Hurricane 4.5-18x50 SFP Illuminated Half Mildot 0.1MRAD Side Focus Locking Turrets Rifle Scope Side focus down to 10 Meters The WULF Hurricane series of Rifle Scopes have been designed from the ground up to fit the needs of both Centrefire and Air Rifle shooters. The WULF Hurricane series of optics hits the sub £250 price point aggressively providing feature-rich models designed for multi-discipline use. Specs Magnification Range: 4.5-18x Objective Lens Diameter: 50mm Tube Diameter: 30mm F.O.V. @ 100yds: 27.7'-7.3' Eye Relief: 89mm (3.5 inches) Reticle: Illuminated Red/Green Half Mildot Reticle IR Battery:CR2032 Fitted Focal Plane: Second Focal Plane Click Value: 0.1 MRAD Total Elevation/Windage Adjustment (MRAD): 27 MRAD (92 MOA) Length (Inch): 13.6 Weight:734gms (26.2 ozs) Side Focus: Yes Parallax: 10yds - ∞ (9 Metres to Infinity) Lens Coating: XHT Fully Multi-Coated Warranty: WULF Titanium Lifetime Warranty 30mm Aluminium Main Tube Extreme Wide FOV Optical System Second Focal Plane Illuminated 5 Step Red/Green Half Mildot Reticle XHT Fully Multi-Coated Lenses – Superb high transmission lens coatings help to increase light transmission, resolution and colour fidelity. Tactical 0.1 MRAD Locking BDC Turrets Side Focus down to 10 Yards (9 Metres) Speed Focus Eyepiece Diopter Highlighted(Red) 10X for Mildot Calculations Nitrogen Purged Waterproof Shockproof Fogproof Rated for All Calibres In the Box WULF Hurricane 4.5-18x50 SFP Illuminated 0.1MRAD Rifle Scope. CR2032 Battery Fitted Deluxe Optical Grade Bikini Covers Wulf Lens Cleaning Cloth Instruction Manual We do not ship this product outside of England, Scotland and Wales.
£249.95£226.94
-
Immersive Optics Immersive Optics 24mm Flip-Up Lens Cover Amber
Immersive Optics 24mm Flip-Up Lens Cover - Amber 24mm flip-up lens cover for the Immersive Optics 10 x 24 rifle scope.With magnetic cover fasteners, this quick release lens cover is resistant against snow, rain, and dust - protecting the lens of the scope and securing directly onto the scope ' s threads for fast and easy installation.Colour: Amber The scope is NOT included
£16.95
-
Scope Turret Stickers - Blue - Yards - Airgun / Rifle
YARDS Stick onto the top turret of your scope to quickly help dial and find your range. 5mm x 6mm stickers for Turrets 8mm x 5mm for parallax stickers Durable weather resistant material Pre cut for easy peeling and application. Horizontal numbering for top turret and parallax wheel at the side or front. Set at 5 yards intervals from 10 to 275 yards We recommend applying in a clean dry environment and if you have large fingers its suggested that a pair of tweezers may help. Ensure you have check your range and settings before applying. Check you have clearance of 5mm on your turret to stick onto.
£6.99
-
Element Optics Element Optics - Helix Windage Turret Dial MRAD
Element Optics - Helix Windage Turret Dial MRAD Want to add more options to your scope, adding different range tapes for different pellets or calibre. Then simply make more space by adding a spare turret to your armoury.
£24.99£19.99
-
Element Optics Element Optics - Titan Elevation Turret Dial MRAD
Element Optics - Titan Elevation Turret Dial MRAD Want to add more options to your scope, adding different range tapes for different pellets or calibre. Then simply make more space by adding a spare turret to your armoury.
£24.99£19.99
-
Element Optics Element Optics - Titan Windage Turret Dial MOA
Element Optics - Titan Windage Turret Dial MOA Want to add more options to your scope, adding different range tapes for different pellets or calibre. Then simply make more space by adding a spare turret to your armoury.
£24.99£19.99
-
Umarex Umarex NP3 - Nano Point 3 - Red / Green Dot Sight
Umarex NP3 - Nano Point 3 Nano Point 3 Compact and lightweight Point Sight Power supply via battery CR2032 (included) Incl. Picatinny mount TECHNICAL DATA Brightness levels 1 Illumination red / green Dot size (MOA) 6 Parallax adjusted to 10 m Recoil resistance .22 lr Length 48 mm Weight 56 g
£64.99£44.49
-
Umarex Umarex Green Dot Sight - Weaver Rail
Umarex Green Dot Sight - Weaver Rail Green dot with two brightness levels and 10 MOA. Dot sight for Picatinny rail Parallax adjusted to 25 m Color of dot: green Lateral battery compartment Incl. battery (CR 2032) TECHNICAL DATA Brightness levels 2 Illumination green Dot size (MOA) 10 Parallax adjusted to 25 m Recoil resistance .22 lr Length 80 mm Weight 58 g Requires 1 x CR2032 battery included.
£69.99£49.99
-
Element Optics Element Optics - Helix Spare Elevation Turret MOA
Element Optics - Helix Spare Elevation Turret MOA Want to add more options to your scope, adding different range tapes for different pellets or calibre. Then simply make more space by adding a spare turret to your armoury.
£24.99£19.99
-
Element Optics Element Optics - Titan 5-25x56 FFP APR-2D MOA
Element Optics - Titan 5-25x56 FFP APR-2D MOA Meet the Game Changer: The TITAN. Like the Helix, the Titan puts your money where it matters, with precision-engineered internals and a turret system superior to other products in the same price class. To make things even better, we’ve gone one step ahead and given the Titan a 34mm tube and ED glass. The 34mm tube allows for a greater elevation/windage range when dialing for those extreme distance shots, and the 56mm Objective lens with ED glass provides you with an ultra-sharp, clear image with a large field of view. The turret system has been upgraded from your stock-standard sporting optic to feature stainless steel internals for resistance against wear-and-tear when dialling regularly – something that modern shooting disciplines require. The tool-free turrets and zero-stop mechanism give you high end features without breaking the bank, and the First Focal Plane reticle means the reticle subtensions remain true at any magnification. We’ve introduced quality control checks to give you peace of mind when taking that 1000 yard shot, and if something goes wrong, our Platinum Lifetime Warranty has you covered! 34mm Main Body Tube Illuminated, First Focal Plane Reticle Aircraft Grade Aluminium Side Parallax: 15yds-Infinity ED Glass for reduced chromatic aberration and improved sharpness Tool-Free Resettable Turrets with 10 MRAD / 25 MOA per Revolution Upgraded Stainless Steel Turret Mechanism Hard Mechanical Zero-Stop Removable Magnification Throw Lever Waterproof, Fogproof, Shockproof & Nitrogen Purged Sunshade, Lens Cloth & Rubber Lens Covers included Weight 39oz and 15.16 inches long Element Optics Titan https://element-optics.com/product/titan/ Warranty - Aftersales - Service - Please visit - https://element-optics.com/warranty/ Lifetime Warranty is with Element Optics. Retailer is unable to repair / authorise repair via third party. Within 30 days of purchase returns will be sent to Element Optics for testing. All scopes are serial numbered and tested at departure and FX Factory. WE DO NOT SHIP THESE ITEMS TO ANY ADDRESS OUTSIDE THE UK - IF YOU CHECKOUT WE WILL REFUND THE PURCHASE - ANY LOSS OF EXCHANGE CURRENCY IS DOWN TO THE PURCHASER.
£710.99£679.99
-
Napier Napier - Apex Scope Cover
Napier - Apex Scope Cover Designed with the shooter in mind, the Apex Scope Cover offers a host of benefits that will help keep your scope clear and free of moisture and dust, all while remaining easy to use and highly effective. Made from ultra-stretch 2mm neoprene, this cover is both lightweight and easy to fit, ensuring that you can quickly and easily cover your scope when not in use. And thanks to its waterproof construction, you can rest assured that your lens is always protected from the elements, no matter where your shooting takes you. But what really sets the Apex Scope Cover apart is its convenient one-handed fast removal system. With just a quick flick of the wrist, you can remove both ends of the cover in complete silence, allowing you to stay focused on your target without any distractions. And with its proven digital camo design and silent brushed fabric, the Apex Scope Cover is as stylish as it is functional, making it the perfect choice for hunters and shooters of all levels. So if you're looking for a high-quality, easy-to-use scope cover that offers superior protection and versatility, look no further than the Apex Scope Cover. Features: Universal - fits most scopes Ultra stretch 2mm neoprene Easy fit One-handed fast removal Silent brushed fabric Proven Digital camo Waterproof Super lens protection Lightweight just 32g Expands from 13.2" to 16"
£32.99£29.49
-
Primary Arms Primary Arms Classic Series 4-16x44 SFP Scope Ill Mil-Dot Reticle
Primary Arms Classic Series 4-16x44 SFP Scope Ill Mil-Dot Reticle The Classic Series proves that entry-level optics dont have to be poor quality optics. Unlike some other brands, we dont use the word value as a euphemism for junk. CLx scopes are perfect for the budget conscious and the new shooter. We take the time to 100% inspect every product in our facility here in Houston to ensure you are receiving the best quality product as our other three tiers. These scopes are backed by the same excellent customer service and support as all other Primary Arms products.The Primary Arms 4-16x scope is a second focal plane scope featuring an illuminated Mil-Dot reticle for ranging targets at 16x magnification. Locking turrets with resettable zero give audible and tactile 1/4 MOA clicks. A side mounted parallax adjust knob keeps the reticle parallax free and the target image sharp at extended ranges. This tough scope is shockproof, water and fog resistant.Features: Illuminated Mil-Dot reticle 12 brightness settings 4-16x magnification Second focal plane design Includes Butler Creek flip caps Objective lens: 31 Eye: 20 Shock proof, waterproof, and fog proof Reticle: MIL-DOT Reticle Position: Second Focal Plane Tube Size: 30mm Illumination: Illuminated Click Value: 1/4 MOA Side Parallax: N/A Field of View: Low: 26.19 ft / High: 6.98 ft Eye Relief: Low: 3.50 in / High: 3.30 in
£184.99£169.99
-
Element Optics Element Optics - Helix 4-16x44 FFP APR-2D MOA
Element Optics - Helix 4-16x44 FFP APR-2D MOA The latest addition to the Element Otpics lineup, the 4-16x44 Helix FFP offers all the brilliant features and rugged reliability that the 6-24x50 does, but with a distinct advantage: This is the lightest, most compact scope Element have made to date. 30mm Main Body Tube Compact, Lightweight design First Focal Plane Reticle Aircraft Grade Aluminium Side Parallax: 15yds-Infinity Fully Multi-Coated Lenses Tool-free Resettable Turrets with 6 MRAD / 15 MOA per Revolution Hard Mechanical Zero-Stop Removable Magnification Throw Lever Waterproof, Fogproof, Shockproof & Nitrogen Purged Sunshade, Lens Cloth & Rubber Lens Caps included MAGNIFICATION RANGE 4-16x TUBE DIAMETER 30mm OBJECTIVE LENS DIAMETER 44mm EXIT PUPIL 13.5-3.3mm EYE RELIEF 3.7 Inches FIELD OF VIEW @100yds: 26.2-6.55ft CLICK VALUE 1/4 MOA (15 MOA / REV) 1/10 MRAD (6 MRAD / REV) ELEVATION ADJUSTMENT RANGE 80 MOA 23.3 MRAD WINDAGE ADJUSTMENT RANGE 45 MOA 13.1 MRAD MINIMUM PARALLAX 15 YDS 15 METERS LENGTH 14.2 Inches 360 mm WEIGHT 23.8oz 675g Warranty - Aftersales - Service - Please visit - https://element-optics.com/warranty/ Lifetime Warranty is with Element Optics. Retailer is unable to repair / authorise repair via third party. Within 30 days of purchase returns will be sent to Element Optics for testing. All scopes are serial numbered and tested at departure and FX Factory. WE DO NOT SHIP THESE ITEMS TO ANY ADDRESS OUTSIDE THE UK - IF YOU CHECKOUT WE WILL REFUND THE PURCHASE - ANY LOSS OF EXCHANGE CURRENCY IS DOWN TO THE PURCHASER.
£410.99£399.99
-
Element Optics Element Optics - Titan 5-25x56 FFP APR-2D MRAD
Element Optics - Titan 5-25x56 FFP APR-2D MRAD Meet the Game Changer: The TITAN. Like the Helix, the Titan puts your money where it matters, with precision-engineered internals and a turret system superior to other products in the same price class. To make things even better, we’ve gone one step ahead and given the Titan a 34mm tube and ED glass. The 34mm tube allows for a greater elevation/windage range when dialing for those extreme distance shots, and the 56mm Objective lens with ED glass provides you with an ultra-sharp, clear image with a large field of view. The turret system has been upgraded from your stock-standard sporting optic to feature stainless steel internals for resistance against wear-and-tear when dialling regularly – something that modern shooting disciplines require. The tool-free turrets and zero-stop mechanism give you high end features without breaking the bank, and the First Focal Plane reticle means the reticle subtensions remain true at any magnification. We’ve introduced quality control checks to give you peace of mind when taking that 1000 yard shot, and if something goes wrong, our Platinum Lifetime Warranty has you covered! 34mm Main Body Tube Illuminated, First Focal Plane Reticle Aircraft Grade Aluminium Side Parallax: 15yds-Infinity ED Glass for reduced chromatic aberration and improved sharpness Tool-Free Resettable Turrets with 10 MRAD / 25 MOA per Revolution Upgraded Stainless Steel Turret Mechanism Hard Mechanical Zero-Stop Removable Magnification Throw Lever Waterproof, Fogproof, Shockproof & Nitrogen Purged Sunshade, Lens Cloth & Rubber Lens Covers included Weight 39oz and 15.16 inches long Element Optics Titan https://element-optics.com/product/titan/ Warranty - Aftersales - Service - Please visit - https://element-optics.com/warranty/ Lifetime Warranty is with Element Optics. Retailer is unable to repair / authorise repair via third party. Within 30 days of purchase returns will be sent to Element Optics for testing. All scopes are serial numbered and tested at departure and FX Factory. WE DO NOT SHIP THESE ITEMS TO ANY ADDRESS OUTSIDE THE UK - IF YOU CHECKOUT WE WILL REFUND THE PURCHASE - ANY LOSS OF EXCHANGE CURRENCY IS DOWN TO THE PURCHASER.
£710.99£688.99
-
Element Optics Element Optics - Titan Elevation Turret Dial MOA
Element Optics - Titan Elevation Turret Dial MOA Want to add more options to your scope, adding different range tapes for different pellets or calibre. Then simply make more space by adding a spare turret to your armoury.
£24.99£19.99
-
Element Optics Element Optics - Helix 4-16x44 FFP APR-1C MOA
Element Optics - Helix 4-16x44 FFP APR-1C MOA The latest addition to the Element Otpics lineup, the 4-16x44 Helix FFP offers all the brilliant features and rugged reliability that the 6-24x50 does, but with a distinct advantage: This is the lightest, most compact scope Element have made to date. 30mm Main Body Tube Compact, Lightweight design First Focal Plane Reticle Aircraft Grade Aluminium Side Parallax: 15yds-Infinity Fully Multi-Coated Lenses Tool-free Resettable Turrets with 6 MRAD / 15 MOA per Revolution Hard Mechanical Zero-Stop Removable Magnification Throw Lever Waterproof, Fogproof, Shockproof & Nitrogen Purged Sunshade, Lens Cloth & Rubber Lens Caps included MAGNIFICATION RANGE 4-16x TUBE DIAMETER 30mm OBJECTIVE LENS DIAMETER 44mm EXIT PUPIL 13.5-3.3mm EYE RELIEF 3.7 Inches FIELD OF VIEW @100yds: 26.2-6.55ft CLICK VALUE 1/4 MOA (15 MOA / REV) 1/10 MRAD (6 MRAD / REV) ELEVATION ADJUSTMENT RANGE 80 MOA 23.3 MRAD WINDAGE ADJUSTMENT RANGE 45 MOA 13.1 MRAD MINIMUM PARALLAX 15 YDS 15 METERS LENGTH 14.2 Inches 360 mm WEIGHT 23.8oz 675g Warranty - Aftersales - Service - Please visit - https://element-optics.com/warranty/ Lifetime Warranty is with Element Optics. Retailer is unable to repair / authorise repair via third party. Within 30 days of purchase returns will be sent to Element Optics for testing. All scopes are serial numbered and tested at departure and FX Factory. WE DO NOT SHIP THESE ITEMS TO ANY ADDRESS OUTSIDE THE UK - IF YOU CHECKOUT WE WILL REFUND THE PURCHASE - ANY LOSS OF EXCHANGE CURRENCY IS DOWN TO THE PURCHASER.
£410.99£405.99
-
Nikko Stirling Nikko Stirling - MountMaster AO One Inch Tube Half Mil Dot 4-16x50
Nikko Stirling - MountMaster AO One Inch Tube Half Mil Dot 4-16x50 Nikko Stirling MountMaster AO Based on our popular MountMaster series with the added addition of a fully adjustable objective with adjustment from 10 Yards to infinity. Wide field of view with adjustable eye piece and std 1/4" adjustments. Ideal For Airgun, Rimfire and small centrefire Rifles. Supplied with Double Screw 3/8" Match Mounts** and dust covers One Inch Tube Half Mil Dot Reticle 4-16x50 This scope is not illuminated. **Please note the dovetail mounts are not changeable by us to picatinny ones, that would be a separate / extra purchase, Nikko Stirling only includes dovetail mounts. SPECIFICATION Magnification: 4-16 Obj Diameter: 50 FOV m@100m (Max Power): 3.1 FOV m@100m (Min Power): 9.1 Length (mm): 333 Weight (gms): 403 Scope manual Instructions can be downloaded from HERE The MountMaster AO series has been developed for all types of shooting. All models feature an Adjustable Objective (AO) which ranges from 10 yards to infinity. Using superior optical coatings and easy to use features, the MountMaster AO series will suit just about any shooting application you need without breaking the bank. >BR>All our tried and proven MountMaster scope series are competitively priced and are rugged enough to stand up to whatever you throw at them. Featuring 1/4 finger adjustable turrets and accurate double screw 3/8 match mounts as well as fully adjustable parallax on the bell (AO) and available with or without illuminated Reticle (IR). All MountMaster scopes feature fully multi-coated lenses, are shock tested and dry-nitrogen purged at the factory to make them fully water and fog proof for guaranteed performance, whether you are on a hunt or at the range.
£68.99
-
Nikko Stirling Nikko Stirling - MountMaster AO illuminated One Inch Tube Half Mil Dot Reticle 3-9x50
Nikko Stirling - MountMaster AO illuminated One Inch Tube Half Mil Dot Reticle 3-9x50 Nikko Stirling MountMaster AO illuminated Based on our popular MountMaster series with the added addition of a fully adjustable objective with adjustment from 10 Yards to infinity plus illuminated Red/Green Reticle. Wide field of view with adjustable eye piece and std 1/4" adjustments. Ideal For Airgun, Rimfire and small centrefire Rifles. Supplied with Double Screw 3/8" Match Mounts and dust covers One Inch Tube illuminated Half Mil Dot Reticle 3-9x50 **Please note the dovetail mounts are not changeable by us to picatinny ones, that would be a separate / extra purchase, Nikko Stirling only includes dovetail mounts. SPECIFICATION Magnification: 3-9 Obj Diameter: 50 FOV m@100m (Max Power): 4 FOV m@100m (Min Power): 11.9 Length (mm): 330 Weight (gms): 394 Scope manual Instructions can be downloaded from HERE The MountMaster AO series has been developed for all types of shooting. All models feature an Adjustable Objective (AO) which ranges from 10 yards to infinity. Using superior optical coatings and easy to use features, the MountMaster AO series will suit just about any shooting application you need without breaking the bank. >BR>All our tried and proven MountMaster scope series are competitively priced and are rugged enough to stand up to whatever you throw at them. Featuring 1/4 finger adjustable turrets and accurate double screw 3/8 match mounts as well as fully adjustable parallax on the bell (AO) and available with or without illuminated Reticle (IR). All MountMaster scopes feature fully multi-coated lenses, are shock tested and dry-nitrogen purged at the factory to make them fully water and fog proof for guaranteed performance, whether you are on a hunt or at the range.
£73.99
-
Tier One Tier One - Scope Mounts 1 Inch 25.4mm Picatinny Medium
Tier One - Scope Mounts 25.4mm Picatinny Medium These are 1 Inch Mounts. Tier One makes some of the best scope rings on the market, high quality with a super high finish to them, made from a single piece of aluminium so you know the rings are true. Ships in a plastic box, with 2 x heads for the screws. Tier One Picatinny Rings are precision made on 5 axis CNC machinery. All sets come with one mount with a bubble level installed ( not both ) The key to accuracy in manufacture is to minimise the number of operations required to complete the machining process. By investing in new Technology, we have been able to cut the number of operations required from eight to two. By doing this, there is no accuracy loss due to re setting for different operations. All Rings are made from solid billets of Aluminium 7075T6 alloy and are available in medium and high configurations. Ring sizes from 1" up to 40mm Picatinny Rings available. Due to the precision of the manufacturing process, lapping is not required when mounted on a quality picatinny rail. Screws are stainless steel and manufactured by us on our own machines to the highest possible specification. WHAT CALIBERS ARE THESE RINGS FOR? We recommend torquing these rings to 18in/lbs because some scope manufacturers make their scopes from soft materials. Torquing any higher could cause marking or other damage to the scope tube. If you're torquing these rings to 18in/lbs then we don't recommend using them with magnum calibers. For magnum caliber rifles we highly recommend our one-piece mounting system, the Monomount. Or, the Tactical Rings, which are based on the Short Saddle mono but come in a two-piece format. Both have a much larger scope contact area. CAN I OVERTORQUE THE TOP RINGS? If you are happy that your scope is manufactured from a strong enough material to resist the extra pressure then you can, entirely at your own risk, torque them up to 26in/lbs as we do when using them on Magnum caliber rifles. IMPORTANT: You MUST check with your scope manufacturer before you do this and we take no responsibility if you mark or otherwise damage your scope tube. Tier One - From the Manufacturer Picatinny Ringset Mounting Instructions Our Picatinny Ringsets are manufactured to the highest tolerances, and it is advised to mount them on a suitable quality picatinny rail to get the optimum result. It is the purchaser’s decision to mount the picatinny rings and optic if they feel competent themselves, or seek advice from their favoured gunsmith. Place your unloaded firearm on a stable work surface, preferably mounted in a suitable gun vice. If no gun vice is available, the firearms own bipod can be utilised instead. It is now important to ascertain the correct eye relief. First loosen the clamp screws with the T25 Torx bit supplied to allow loose placement upon the picatinny rail, now remove the ring cap screws using the supplied T15 Torx bit, and gently attach the rings onto your picatinny rail, lightly tightening at this stage, ensuring the rear most one does not foul on the firearms bolt when worked. You now have a starting point to set your correct optic position. Place the optic into the rings and shoulder your firearm carefully, you may want to replace the ring caps very loosely to avoid letting your optic fall out of the mounts whilst doing this. As a guide, it is generally better if the rings are as far apart as possible to gain maximum strength and stability. Your optic should be set at the maximum magnification and if present, the parallax correction set to infinity. When viewing your optic from the shouldered position you should be able to see a clear image. If you can see a dark ring around the ocular lens gently move your optic fore or aft until this disappears. Great care should be taken at this point not to damage your optics finish. A pencil mark placed upon the optic as reference to the ring cap location will aid the final stage of mounting. You have now set the correct position for the ringset bases. Remove the ring caps and optic and tighten the T25 Torx screw on the ring claw to 4Nm, ensuring the ring bases are pushed firmly toward the muzzle to counter the effects of recoil. Now place your optic back into the rings using your pencil datum points as a guide, replace the ring caps, and using the T15 Torx bit in your fingers only, tighten the screws gently and evenly to maintain an equal gap between ring base and cap. Only light pressure is needed as it is important at this stage to be able to turn the optic in the rings without damage occurring to the finish. It is the installer’s decision to mount the optic by utilising the bubble built into the rear ring to level the rifle, and also a separate bubble placed upon the optics elevation turret cap, or by shouldering their firearm whilst viewing a suitable true vertical line, and rotating the optic gently until the bubble levels align, or the reticle matches the chosen vertical line. Care should again be taken at this stage to ensure no damage occurs to the optics outer finish. Once the installer is happy with the reticle alignment, the ring cap screws should be tightened gently and evenly, at opposing corners, whilst maintaining an equal gap to both sides, up to the recommended torque setting of 2Nm. Care at this stage should be taken to ensure your optic remains level, and doesn’t move during the tightening process.
£145.99£129.99
-
Element Optics Element Optics - Helix Spare Elevation Turret MRAD
Element Optics - Helix Spare Elevation Turret MRAD Want to add more options to your scope, adding different range tapes for different pellets or calibre. Then simply make more space by adding a spare turret to your armoury.
£24.99£19.99
-
Element Optics Element Optics Helix 6-24x50 FFP APR-1C MOA
Element Optics Helix 6-24x50 FFP APR-1C MOA Looking for a riflescope that punches above its weight? Something that holds its own against products twice its price? We’ve designed the HELIX in a way that puts the important things first: clear glass, smart reticles, innovative features and a turret system superior to other products in the same price class. Looking for a high performance precision riflescope that punches above its weight? Element Optics have designed the HELIX in a way that puts the important things first: clear glass, smart reticles, innovative features and a turret system superior to other products in the same price class. The turret system has been upgraded from your stock-standard sporting optic to feature stainless steel internals for resistance against wear-and-tear when dialling regularly - something that modern shooting disciplines require. The tool-free turrets and zero-stop mechanism give you high end features without breaking the bank, and the First Focal Plane reticle ensures precise reticle calibration at all magnifications. Element have also introduced quality control checks to give you peace of mind when taking that 1000 yard shot, and if something goes wrong, their Platinum Lifetime Warranty has you covered! MAGNIFICATION RANGE 6-24x TUBE DIAMETER 30mm RETICLE POSITION First Focal Plane OBJECTIVE LENS DIAMETER 50mm EYE RELIEF 3.7-4 FIELD OF VIEW 100yds 18.3-4.6ft CLICK VALUE 1/4 MOA (15 MOA / REV) ELEVATION ADJUSTMENT RANGE 65 MOA WINDAGE ADJUSTMENT RANGE 40 MOA MINIMUM PARALLAX 10 YDS LENGTH 14.3 / 363mm WEIGHT 26oz / 760g MPN 50045 Element Optics Helix https://element-optics.com/product/helix-ffp/ Warranty - Aftersales - Service - Please visit - https://element-optics.com/warranty/ Lifetime Warranty is with Element Optics. Retailer is unable to repair / authorise repair via third party. Within 30 days of purchase returns will be sent to Element Optics for testing. All scopes are serial numbered and tested at departure and FX Factory. WE DO NOT SHIP THESE ITEMS TO ANY ADDRESS OUTSIDE THE UK - IF YOU CHECKOUT WE WILL REFUND THE PURCHASE - ANY LOSS OF EXCHANGE CURRENCY IS DOWN TO THE PURCHASER.
£419.99£405.99
-
Richter Optik Richter Optik 3-9x42 AO Scope
Richter Optik 3-9x42 AO Scope The Richter Exact Range of scopes are packed full of features and are perfect for multiple shooting scenarios including hunting, target shooting and airgun target and pest control shooting. Excellent value for money rifle scope. Includes free of charge flip-up lens covers. 3-9x adjustable zoom 42 mm objective lens Parallax adjustable; 10yds - infinity Mil Dot reticle Approx 34cm in Length Richter Scopes offer top quality optics at extremely reasonable prices. Clear, crisp imagery and strong build quality does not need to cost the earth. Richter Scopes are made in China by a specialist optical and electrical manufacturer, using the latest and most advanced CNC equipment available. The factory strives for excellence through continuous product research and development, adopting advanced optics technologies and offering a professional service.
£45.99£39.99
-
Fast Sight Fast Sight 1x22 Green and Red Dot Sight
Fast Sight 1x22 Green and Red Dot Sight Fits weaver / picatinny rails 15-22mm. this economic holographic sight will improve accuracy on pistols and rifles with a long eye relief. The Fast Sight features a choice of four reticles in either red or green, including crosshair and simple dot. Each colour has five levels of illumination for all light conditions. Adjustable for windage and elevation. 82mm long and weighs just 115g. Packaged in attractive ABS box and includes optics cover, CR2032 batteries (1 supplied), lens cloth, hex keys and instructions.
£44.99£39.99
-
Element Optics Element Optics - Helix 8x56 IR 30mm SFP Raptr MOA
Element Optics - Helix 8x56 IR 30mm SFP Raptr MOA Element Optics scopes have taken the shooting world by storm. High quality made optics, with shooters in mind. The range continues to expand and now we have the 8X56 SFP Raptr MOA, with low profile capped turrets and a basic Illuminated Reticle that allows for fast response shooting, with the clutter of too much information in the scope. RAPTR MOA Reticle RAPTR stands for Rapid Trajectory. Element have designed this reticle to make bullet drop compensation at close to moderate distances SIMPLE. For an unobstructed view, theyve placed a free-floating, illuminated center dot and fine crosshair at the core of this design. If you dont plan to shoot much further than 100-150 Meters, youre all good to go! Main Features 30mm Main Body Tube Compact, Lightweight design Aircraft Grade Aluminium Side Parallax: 10yds-Infinity Fully Multi-Coated Lenses Tool-free Resettable Turrets with 6 MRAD / 15 MOA per Revolution Hard Mechanical Zero-Stop Removable Magnification Throw Lever Waterproof, Fogproof, Shockproof Nitrogen Purged Sunshade, Lens Cloth Rubber Lens Caps included Warranty - Aftersales - Service - Please visit - https://element-optics.com/warranty/ Lifetime Warranty is with Element Optics. Retailer is unable to repair / authorise repair via third party. Within 30 days of purchase returns will be sent to Element Optics for testing. All scopes are serial numbered and tested at departure and FX Factory. WE DO NOT SHIP THESE ITEMS TO ANY ADDRESS OUTSIDE THE UK - IF YOU CHECKOUT WE WILL REFUND THE PURCHASE - ANY LOSS OF EXCHANGE CURRENCY IS DOWN TO THE PURCHASER.
£359.99£349.99
-
Nikko Stirling Nikko Stirling - MountMaster, One Inch Tube Half Mil Dot Reticle 3-9x40
Nikko Stirling - MountMaster, One Inch Tube Half Mil Dot Reticle 3-9x40 Nikko Stirling MountMaster Great value scope with excellent features. Wide field of view with adjustable eye piece and std 1/4" adjustments. Ideal For Airgun, Rimfire and small centrefire Rifles. Supplied with 3/8" Mounts and dust covers One Inch Tube Half Mil Dot Reticle 3-9x40The MountMaster series have been designed and developed for those wanting an easy to use scope that is not only strong but reliable and clear. Featuring 3/8? Mounts as standard with easy to use adjustments, the MountMaster series fits just about any disciplineyou require.The popular MountMaster series is based on the tough Silver Crown but is supplied with a set of 3/8? Mounts as standard. All models are supplied with dust covers and feature 1/4? adjustable turrets with fully multi-coated lenses, are shock tested and dry-nitrogen purged at the factory to make them fully water and fog proof for guaranteed performance, whether you are on a hunt or at the range. SPECIFICATION Magnification: 3-9 Obj Diameter: 40 FOV m@100m (Max Power): 4.3 FOV m@100m (Min Power): 13 Length (mm): 311 Weight (gms): 271 **Please note the dovetail mounts are not changeable by us to picatinny ones, that would be a separate / extra purchase, Nikko Stirling only includes dovetail mounts.
£39.99
-
Tier One Tier One - Scope Mounts 30mm Picatinny High
Tier One - Scope Mounts 30mm Picatinny High These are 30mm Mounts. Tier One makes some of the best scope rings on the market, high quality with a super high finish to them, made from a single piece of aluminium so you know the rings are true. Ships in a box, with 2 x heads for the screws. Tier One Picatinny Rings are precision made on 5 axis CNC machinery. All sets come with one mount with a bubble level installed ( not both ) The key to accuracy in manufacture is to minimise the number of operations required to complete the machining process. By investing in new Technology, we have been able to cut the number of operations required from eight to two. By doing this, there is no accuracy loss due to re setting for different operations. All Rings are made from solid billets of Aluminium 7075T6 alloy and are available in medium and high configurations. Ring sizes from 1" up to 40mm Picatinny Rings available. Due to the precision of the manufacturing process, lapping is not required when mounted on a quality picatinny rail. Screws are stainless steel and manufactured by us on our own machines to the highest possible specification. WHAT CALIBERS ARE THESE RINGS FOR? We recommend torquing these rings to 18in/lbs because some scope manufacturers make their scopes from soft materials. Torquing any higher could cause marking or other damage to the scope tube. If you're torquing these rings to 18in/lbs then we don't recommend using them with magnum calibers. For magnum caliber rifles we highly recommend our one-piece mounting system, the Monomount. Or, the Tactical Rings, which are based on the Short Saddle mono but come in a two-piece format. Both have a much larger scope contact area. CAN I OVERTORQUE THE TOP RINGS? If you are happy that your scope is manufactured from a strong enough material to resist the extra pressure then you can, entirely at your own risk, torque them up to 26in/lbs as we do when using them on Magnum caliber rifles. IMPORTANT: You MUST check with your scope manufacturer before you do this and we take no responsibility if you mark or otherwise damage your scope tube. Tier One - From the Manufacturer Picatinny Ringset Mounting Instructions Our Picatinny Ringsets are manufactured to the highest tolerances, and it is advised to mount them on a suitable quality picatinny rail to get the optimum result. It is the purchaser’s decision to mount the picatinny rings and optic if they feel competent themselves, or seek advice from their favoured gunsmith. Place your unloaded firearm on a stable work surface, preferably mounted in a suitable gun vice. If no gun vice is available, the firearms own bipod can be utilised instead. It is now important to ascertain the correct eye relief. First loosen the clamp screws with the T25 Torx bit supplied to allow loose placement upon the picatinny rail, now remove the ring cap screws using the supplied T15 Torx bit, and gently attach the rings onto your picatinny rail, lightly tightening at this stage, ensuring the rear most one does not foul on the firearms bolt when worked. You now have a starting point to set your correct optic position. Place the optic into the rings and shoulder your firearm carefully, you may want to replace the ring caps very loosely to avoid letting your optic fall out of the mounts whilst doing this. As a guide, it is generally better if the rings are as far apart as possible to gain maximum strength and stability. Your optic should be set at the maximum magnification and if present, the parallax correction set to infinity. When viewing your optic from the shouldered position you should be able to see a clear image. If you can see a dark ring around the ocular lens gently move your optic fore or aft until this disappears. Great care should be taken at this point not to damage your optics finish. A pencil mark placed upon the optic as reference to the ring cap location will aid the final stage of mounting. You have now set the correct position for the ringset bases. Remove the ring caps and optic and tighten the T25 Torx screw on the ring claw to 4Nm, ensuring the ring bases are pushed firmly toward the muzzle to counter the effects of recoil. Now place your optic back into the rings using your pencil datum points as a guide, replace the ring caps, and using the T15 Torx bit in your fingers only, tighten the screws gently and evenly to maintain an equal gap between ring base and cap. Only light pressure is needed as it is important at this stage to be able to turn the optic in the rings without damage occurring to the finish. It is the installer’s decision to mount the optic by utilising the bubble built into the rear ring to level the rifle, and also a separate bubble placed upon the optics elevation turret cap, or by shouldering their firearm whilst viewing a suitable true vertical line, and rotating the optic gently until the bubble levels align, or the reticle matches the chosen vertical line. Care should again be taken at this stage to ensure no damage occurs to the optics outer finish. Once the installer is happy with the reticle alignment, the ring cap screws should be tightened gently and evenly, at opposing corners, whilst maintaining an equal gap to both sides, up to the recommended torque setting of 2Nm. Care at this stage should be taken to ensure your optic remains level, and doesn’t move during the tightening process.
£145.99£124.99
-
Richter Optik Richter Optik 3-9x50 AOE - QO9 Mil Dot Dynamic Zoom Airgun Scope - Illuminated
Richter Optik - 3-9x50 AOE - QO9 Mil Dot Dynamic Zoom Airgun Scope - Illuminated Ideal as a basic hunting / target scope. Weight: 632grams Length: 340mm Reticle: Red Illuminated Mil Dot Reticle. PX Adjustment: Front parallax adjustable. Minimum Focus (On Full Magnification): approx. 10 metres. Lens Covers Supplied: Flip Up Lens Covers. Turrets: Coin type turrets under caps. Battery (Included): CR2032 3v lithium button cell Mounts are NOT supplied Richter Scopes offer top quality optics at extremely reasonable prices. Clear, crisp imagery and strong build quality does not need to cost the earth. Richter Scopes are made in China by a specialist optical and electrical manufacturer, using the latest and most advanced CNC equipment available. The factory strives for excellence through continuous product research and development, adopting advanced optics technologies and offering a professional service.
£64.99
-
Immersive Optics Immersive Optics 10x40 MILDOT EXTENDED w/MOA ADJ MOUNTS
Immersive Optics 10x40 MILDOT EXTENDED w/MOA ADJ MOUNTS This is a zero eye relief optic - ideal for PCP Airguns The Immersive Optics 10x24 day scope offers high accuracy shooting within a highly compact format.Using a prism based optical system, the 10x24 ' s size can be immediately reduced, eliminating a traditionally large objective lens and exceedingly long housing & eye-relief. This is done without sacrificing the scopes light-gathering performance, field of view or magnification.The implementation of this new prismatic design not only allows the 10x24 to maintain a high optical output and a minimal size, but also a reduced bulk and weight, which results in a better balance for whichever shooting platform the scope is mounted on. This optimisation means that a shooter can aim for longer without fatiguing.Offers up to 4x wider field of view when compared to traditional sights and can focus down to a distance of 6m for close-range shooting.The 10x24 has a glass-etched illuminated mildot or mildot rapid reticle (see individual models), high precision windage & elevation controls (no parallax) and comes with a MOA adjustable mount.This scope is fitted with ED (Extra-Low Dispersion) glass which helps to maintain natural colour reproduction within the observable field of view, minimising chromatic aberration (colour fringing), resulting in high clarity, picture-perfect results even at long distances.All Immersive Optics day scopes feature an innovative eye-relief and lens cap retention system which allows these aspects to be quickly and easily held securely out of the way.All Immersive Optics scopes have CNC machined housings for zero-errors, with optical channels being nitrogen-filled for anti-fogging and sealed against water for maximum quality of use. This is a video if the standard 5x30 Immersive Optics. In brief Immersive Optics Feature: Prismatic design Compact size Lightweight Short eye-relief High magnification Wider field of view (when compared to traditional sights) ED glass for high clarity Highly focusable No parallax Illuminated reticles MOA adjustable mounts available Innovative eye-relief & lens cap retention system Better gun/scope weight distribution Reduced shooter fatigue For rifles with moderate to no recoil CNC machined precision mechanics 0.1 mill turrets to match mildot reticles Adjustable elevation & windage (MIL 28 | MOA 83) Precise rotations (MIL 5 | MOA 15) & revolutions (Clicks 50) Nitrogen-Filled optical channel (Anti-Fogging) Waterproof Shock-Resistant (600G) Powered by 1x CR2032 battery Dimensions122x51x72 mm Magnification10.0x Weight248g Lens24mm MountTypeMOA Mount Range6m - ∞ YesWaterproof YesShock-Proof 45mmEye Relief Anti-FoggingNitrogen-Filled 34mmTube Size
£269.99
-
Eagle Vision Eagle Vision - 30mm Scope Ring Anti Can't Bubble Level Ring
Eagle Vision - 30mm Scope Ring Anti Can't Bubble Level Ring A long-range shot has many factors to take into consideration to be sure you are on target – the EVC/LEVEL anti-cant system aids in the correction of ‘cant error’, giving you dead-on true vertical hold, just before you pull the trigger.The suspended bubble level with reflective platform, allows maximum light refraction for enhanced fluid illumination and sight acquisition, in all outdoor and harsh conditions.It is an anti-cant device that helps you hold your scoped gun level, plumb, and squared with the world for enhanced accuracy at longer ranges. Functions: Helps in keeping your rifle perfectly vertical for accurate long range shooting.Fits 30mm scopes.Quick and easy installation.High visibility bubble levels.Solid, durable construction.x 6 different colour bubble levesl to choos from.x 2 side attachments with M4 holes for our angle indicator picatinny rail or our future accessories. Package includes: x 1 scope ring bubble level.x 6 different bubble level colours: clear, yellow, green, red blue and black.x 2 two different size allen keys.x 2 bubble level holder screws.x 1 spare ring screw. Features: Ring size: 30mmWeights: 22gMaterial: 6061 aluminium, black anodised. To install you will need to establish your scope / rifle in a level position first. Then match the bubble level ring to the setting you require.
£29.98
-
Eagle Vision Eagle Vision - 34mm Scope Ring Anti Can't Bubble Level Ring
Eagle Vision - 34mm Scope Ring Anti Can't Bubble Level Ring A long-range shot has many factors to take into consideration to be sure you are on target – the EVC/LEVEL anti-cant system aids in the correction of ‘cant error’, giving you dead-on true vertical hold, just before you pull the trigger.The suspended bubble level with reflective platform, allows maximum light refraction for enhanced fluid illumination and sight acquisition, in all outdoor and harsh conditions.It is an anti-cant device that helps you hold your scoped gun level, plumb, and squared with the world for enhanced accuracy at longer ranges. Functions: Helps in keeping your rifle perfectly vertical for accurate long range shooting.Fits 34mm scopes.Quick and easy installation.High visibility bubble levels.Solid, durable construction.x 6 different colour bubble levesl to choos from.x 2 side attachments with M4 holes for our angle indicator picatinny rail or our future accessories. Package includes: x 1 scope ring bubble level.x 6 different bubble level colours: clear, yellow, green, red blue and black.x 2 two different size allen keys.x 2 bubble level holder screws.x 1 spare ring screw. Features: Ring size: 34mmWeights: 22gMaterial: 6061 aluminium, black anodised. To install you will need to establish your scope / rifle in a level position first. Then match the bubble level ring to the setting you require.
£29.98
-
Element Optics Element Optics - Titan 3-18x50 FFP APR-2D MRAD
Element Optics - Titan 3-18x50 FFP APR-2D MRAD Meet the Game Changer: The TITAN. Like the Helix, the Titan puts your money where it matters, with precision-engineered internals and a turret system superior to other products in the same price class. The TITAN puts your money where it matters, with precision-engineered internals and a turret system superior to other products in the same price class. To make things even better, we’ve gone one step ahead and given the Titan a 34mm tube and ED glass. The 3-18 Model features an impressive 150 MOA (43.6 MRAD) of internal Elevation Travel, making this a viable option for Extreme Long Range shooting, while the relatively compact form and broad magnification range makes it suitable for hunters and PRS shooters – a true multi-purpose riflescope. As always, we’ve worked hard to introduce stringent quality control checks to give you peace of mind when taking that once-in-a-lifetime shot, and if something goes wrong, our Platinum Lifetime Warranty has you covered! The turret system has been upgraded from your stock-standard sporting optic to feature stainless steel internals for resistance against wear-and-tear when dialling regularly – something that modern shooting disciplines require. The tool-free turrets and zero-stop mechanism give you high end features without breaking the bank, and the First Focal Plane reticle means the reticle subtensions remain true at any magnification. 34mm Main Body Tube Illuminated, First Focal Plane Reticle Aircraft Grade Aluminium Side Parallax: 10yds-Infinity ED Glass for reduced chromatic aberration and improved sharpness Tool-Free Resettable Turrets with 10 MRAD / 25 MOA per Revolution Upgraded Stainless Steel Turret Mechanism Hard Mechanical Zero-Stop Removable Magnification Throw Lever Waterproof, Fogproof, Shockproof & Nitrogen Purged Sunshade, Lens Cloth & Rubber Lens Covers included 150 MOA (43.6 MRAD) Elevation Travel MAGNIFICATION RANGE 3-18x TUBE DIAMETER 34mm OBJECTIVE LENS DIAMETER 50mm EXIT PUPIL 16.67-2.78mm EYE RELIEF 4 Inches FIELD OF VIEW @100yds: 41-6.8ft | @100m: 13.75-2.28 CLICK VALUE 1/10 MRAD (10 MRAD / REV) ELEVATION ADJUSTMENT RANGE 43.6 MRAD WINDAGE ADJUSTMENT RANGE 14.5 MRAD MINIMUM PARALLAX 10 METERS LENGTH 370mm WEIGHT 976gr Element Optics Titan https://element-optics.com/product/titan/ Warranty - Aftersales - Service - Please visit - https://element-optics.com/warranty/ Lifetime Warranty is with Element Optics. Retailer is unable to repair / authorise repair via third party. Within 30 days of purchase returns will be sent to Element Optics for testing. All scopes are serial numbered and tested at departure and FX Factory. WE DO NOT SHIP THESE ITEMS TO ANY ADDRESS OUTSIDE THE UK - IF YOU CHECKOUT WE WILL REFUND THE PURCHASE - ANY LOSS OF EXCHANGE CURRENCY IS DOWN TO THE PURCHASER.
£693.95£669.99
-
Element Optics Element Optics - Titan 5-25x56 FFP EHR-1C MOA
Element Optics - Titan 5-25x56 FFP EHR-1C MOA Meet the Game Changer: The TITAN. Like the Helix, the Titan puts your money where it matters, with precision-engineered internals and a turret system superior to other products in the same price class. To make things even better, we’ve gone one step ahead and given the Titan a 34mm tube and ED glass. The 34mm tube allows for a greater elevation/windage range when dialing for those extreme distance shots, and the 56mm Objective lens with ED glass provides you with an ultra-sharp, clear image with a large field of view. The turret system has been upgraded from your stock-standard sporting optic to feature stainless steel internals for resistance against wear-and-tear when dialling regularly – something that modern shooting disciplines require. The tool-free turrets and zero-stop mechanism give you high end features without breaking the bank, and the First Focal Plane reticle means the reticle subtensions remain true at any magnification. We’ve introduced quality control checks to give you peace of mind when taking that 1000 yard shot, and if something goes wrong, our Platinum Lifetime Warranty has you covered! 34mm Main Body Tube Illuminated, First Focal Plane Reticle Aircraft Grade Aluminium Side Parallax: 15yds-Infinity ED Glass for reduced chromatic aberration and improved sharpness Tool-Free Resettable Turrets with 10 MRAD / 25 MOA per Revolution Upgraded Stainless Steel Turret Mechanism Hard Mechanical Zero-Stop Removable Magnification Throw Lever Waterproof, Fogproof, Shockproof & Nitrogen Purged Sunshade, Lens Cloth & Rubber Lens Covers included Weight 39oz and 15.16 inches long Element Optics Titan https://element-optics.com/product/titan/ Warranty - Aftersales - Service - Please visit - https://element-optics.com/warranty/ Lifetime Warranty is with Element Optics. Retailer is unable to repair / authorise repair via third party. Within 30 days of purchase returns will be sent to Element Optics for testing. All scopes are serial numbered and tested at departure and FX Factory. WE DO NOT SHIP THESE ITEMS TO ANY ADDRESS OUTSIDE THE UK - IF YOU CHECKOUT WE WILL REFUND THE PURCHASE - ANY LOSS OF EXCHANGE CURRENCY IS DOWN TO THE PURCHASER.
£710.99£689.95
-
Immersive Optics Immersive Optics 40mm Flip-Up Lens Cover Grey
Immersive Optics 40mm Flip-Up Lens Cover - Grey 40mm flip-up lens cover for the Immersive Optics 10x40 rifle scope.With magnetic cover fasteners, this quick release lens cover is resistant against snow, rain, and dust - protecting the lens of the scope and securing directly onto the scope ' s threads for fast and easy installation.Colour: Grey The scope is NOT included
£18.95
-
Immersive Optics Immersive Optics 30mm Flip-Up Lens Cover Grey
Immersive Optics 30mm Flip-Up Lens Cover - Amber 30mm flip-up lens cover for the Immersive Optics 5 x 30 rifle scope.With magnetic cover fasteners, this quick release lens cover is resistant against snow, rain, and dust - protecting the lens of the scope and securing directly onto the scope ' s threads for fast and easy installation.Colour: Grey The scope is NOT included
£15.95
-
Umarex Umarex / Walther RDS6 Red Dot Sight
Umarex / Walther RDS6 Red Dot Sight A sturdy, closed dot sight with optionally green or red dot. Five levels of brightness each color for every light condition around and at the target. With integrated mount for Picatinny rails. TECHNICAL DATA Brightness levels 5 Illumination red / green Dot size (MOA) 6 Parallax adjusted to 10 m Mount Picatinny Length 66 mm Weight 120 g
£79.99£73.99
-
Richter Optik Richter Optik 4x32 Compact AOE Scope
Richter Optik 4x32 Compact AOE Scope Small, compact scope, ideal as a basic hunting scope for a smaller rifle or when something light weight is needed. Front Parallax - On front Bell 5Y to Infinity Screw Caps for turrets Front Eye Focus Wheel Plastic pop up cover caps included 25mm Tube 360g Weight 21.5cm Length This is a basic starter scope - but incredibly useful for close fast fire requirements.
£41.99
-
Umarex Umarex UX Nano Point 4 Point Sight - Red / Green Dot
Umarex UX Nano Point 4 Point Sight - Red / Green Dot Nano Point 4 Robust Point Sight Illumination colors (red/green) and brightness quickly changed via adjusting wheel Back-up iron sights Power supply via batteries AG9/LR45/RL936 (included) Battery change without dismounting Waterproof according to IPX6 Incl. Picatinny mount TECHNICAL DATA Brightness levels 5 Illumination red / green Dot size (MOA) 4 Parallax adjusted to 10 m Recoil resistance .22 lr Length 155 mm Weight 365 g
£64.99£53.99
-
Immersive Optics Immersive Optics 30mm Flip-Up Lens Cover Amber
Immersive Optics 30mm Flip-Up Lens Cover - Amber 30mm flip-up lens cover for the Immersive Optics 5 x 30 rifle scope.With magnetic cover fasteners, this quick release lens cover is resistant against snow, rain, and dust - protecting the lens of the scope and securing directly onto the scope ' s threads for fast and easy installation.Colour: Amber The scope is NOT included
£15.95
-
Immersive Optics Immersive Optics 10x24 MILDOT w/MOA ADJ MOUNTS
Immersive Optics 10x24 MILDOT w/MOA ADJ MOUNTS This is a zero eye relief optic - ideal for PCP Airguns The Immersive Optics 10x24 day scope offers high accuracy shooting within a highly compact format.Using a prism based optical system, the 10x24 ' s size can be immediately reduced, eliminating a traditionally large objective lens and exceedingly long housing & eye-relief. This is done without sacrificing the scopes light-gathering performance, field of view or magnification.The implementation of this new prismatic design not only allows the 10x24 to maintain a high optical output and a minimal size, but also a reduced bulk and weight, which results in a better balance for whichever shooting platform the scope is mounted on. This optimisation means that a shooter can aim for longer without fatiguing.Offers up to 4x wider field of view when compared to traditional sights and can focus down to a distance of 6m for close-range shooting.The 10x24 has a glass-etched illuminated mildot or mildot rapid reticle (see individual models), high precision windage & elevation controls (no parallax) and comes with a MOA adjustable mount.This scope is fitted with ED (Extra-Low Dispersion) glass which helps to maintain natural colour reproduction within the observable field of view, minimising chromatic aberration (colour fringing), resulting in high clarity, picture-perfect results even at long distances.All Immersive Optics day scopes feature an innovative eye-relief and lens cap retention system which allows these aspects to be quickly and easily held securely out of the way.All Immersive Optics scopes have CNC machined housings for zero-errors, with optical channels being nitrogen-filled for anti-fogging and sealed against water for maximum quality of use. This is a video if the standard 5x30 Immersive Optics. In brief Immersive Optics Feature: Prismatic design Compact size Lightweight Short eye-relief High magnification Wider field of view (when compared to traditional sights) ED glass for high clarity Highly focusable No parallax Illuminated reticles MOA adjustable mounts available Innovative eye-relief & lens cap retention system Better gun/scope weight distribution Reduced shooter fatigue For rifles with moderate to no recoil CNC machined precision mechanics 0.1 mill turrets to match mildot reticles Adjustable elevation & windage (MIL 28 | MOA 83) Precise rotations (MIL 5 | MOA 15) & revolutions (Clicks 50) Nitrogen-Filled optical channel (Anti-Fogging) Waterproof Shock-Resistant (600G) Powered by 1x CR2032 battery Dimensions122x51x72 mm Magnification10.0x Weight248g Lens24mm MountTypeMOA Mount Range6m - ∞ YesWaterproof YesShock-Proof 45mmEye Relief Anti-FoggingNitrogen-Filled 34mmTube Size
£229.99
-
Element Optics Element Optics - Helix 6-24x50 SFP EHR - 1C MOA
Element Optics - Helix 6-24x50 SFP EHR - 1C MOA Looking for a riflescope that punches above its weight? Something that holds its own against products twice its price? We’ve designed the HELIX in a way that puts the important things first: clear glass, smart reticles, innovative features and a turret system superior to other products in the same price class. Our turret system has been upgraded from your stock-standard sporting optic to feature stainless steel internals for resistance against wear-and-tear when dialling regularly – something that modern shooting disciplines require. The tool-free turrets and zero-stop mechanism give you high end features without breaking the bank, and the 24x reticle calibration allows you to effectively use the reticle at 12x and 6x if you so wish (with some basic math, of course!). We’ve introduced quality control checks to give you peace of mind when taking that 1000 yard shot, and if something goes wrong, our Platinum Lifetime Warranty has you covered! 30mm Main Body Tube Compact, Lightweight design Second Focal Plane Reticle – useable at 6x, 12x and 24x Aircraft Grade Aluminium Side Parallax: 10yds-Infinity Fully Multi-Coated Lenses Tool-free Resettable Turrets with 6 MRAD / 15 MOA per Revolution Hard Mechanical Zero-Stop Removable Magnification Throw Lever Waterproof, Fogproof, Shockproof & Nitrogen Purged Sunshade, Lens Cloth & Rubber Lens Caps included Weight 26oz and 14.3 inches long Element Optics Helix https://element-optics.com/product/helix/ Warranty - Aftersales - Service - Please visit - https://element-optics.com/warranty/ Lifetime Warranty is with Element Optics. Retailer is unable to repair / authorise repair via third party. Within 30 days of purchase returns will be sent to Element Optics for testing. All scopes are serial numbered and tested at departure and FX Factory. WE DO NOT SHIP THESE ITEMS TO ANY ADDRESS OUTSIDE THE UK - IF YOU CHECKOUT WE WILL REFUND THE PURCHASE - ANY LOSS OF EXCHANGE CURRENCY IS DOWN TO THE PURCHASER.
£354.00£334.99
-
Element Optics Element Optics - Helix 4-16x44 FFP APR-2D MRAD
Element Optics - Helix 4-16x44 FFP APR-2D MRAD The latest addition to the Element Otpics lineup, the 4-16x44 Helix FFP offers all the brilliant features and rugged reliability that the 6-24x50 does, but with a distinct advantage: This is the lightest, most compact scope Element have made to date. 30mm Main Body Tube Compact, Lightweight design First Focal Plane Reticle Aircraft Grade Aluminium Side Parallax: 15yds-Infinity Fully Multi-Coated Lenses Tool-free Resettable Turrets with 6 MRAD / 15 MOA per Revolution Hard Mechanical Zero-Stop Removable Magnification Throw Lever Waterproof, Fogproof, Shockproof & Nitrogen Purged Sunshade, Lens Cloth & Rubber Lens Caps included MAGNIFICATION RANGE 4-16x TUBE DIAMETER 30mm OBJECTIVE LENS DIAMETER 44mm EXIT PUPIL 13.5-3.3mm EYE RELIEF 3.7 Inches FIELD OF VIEW @100yds: 26.2-6.55ft CLICK VALUE 1/4 MOA (15 MOA / REV) 1/10 MRAD (6 MRAD / REV) ELEVATION ADJUSTMENT RANGE 80 MOA 23.3 MRAD WINDAGE ADJUSTMENT RANGE 45 MOA 13.1 MRAD MINIMUM PARALLAX 15 YDS 15 METERS LENGTH 14.2 Inches 360 mm WEIGHT 23.8oz 675g Warranty - Aftersales - Service - Please visit - https://element-optics.com/warranty/ Lifetime Warranty is with Element Optics. Retailer is unable to repair / authorise repair via third party. Within 30 days of purchase returns will be sent to Element Optics for testing. All scopes are serial numbered and tested at departure and FX Factory. WE DO NOT SHIP THESE ITEMS TO ANY ADDRESS OUTSIDE THE UK - IF YOU CHECKOUT WE WILL REFUND THE PURCHASE - ANY LOSS OF EXCHANGE CURRENCY IS DOWN TO THE PURCHASER.
£408.99
You have seen 48 out of 110 products
