Age verification
Please confirm that you are 18 years or older to enter the shop.
Have patience...
You are not old enough to visit the shop yet.
Products
-
Best Fittings BSA Airgun Fill Probe Stepped
BSA Airgun Fill Probe Stepped This is the STEPPED design. Stepped Design Suitable for Scorpion Cadet (Gauge at front of rifle) Goldstar SE, Coyote & Buccaneer (Export Only) and GAMO Coyote Standard 1/8″ BSP male thread for direct fitting to a flexible fill line or one of our Quick Coupler Plugs. Complete with two spare ‘O’ rings and a sachet of silicone grease. DOUBLE CHECK - They make another probe Straight design suitable for BSA Hornet, Scorpion, Ultra, R-10, High Fill, Spitfire and Firebird. CAUTION - You are working with high pressure air, always be safe. Airgun 101 Shop is not responsible for any injury / damage to any person, third party or item when using this part.
£15.00
-
BSA BSA Foldable Bipod
BSA Foldable Bipod 21-26cm Ideal budget airgun bipod. Will work with PCP and spring airguns. Comes with a picatinny rail attachment, included is swivel studs and swivel stud conversion adapter. Lets be clear this is a budget bipod, ideal for a starter kit. Legs can be either straight down of folded forward. Genuine BSA product.
£29.99 £21.99
-
BSA BSA Moderator - Model 644
BSA Moderator Code 644 BSA Moderator with a 1/2 Inch UNF Fitting. The front cap will unscrew should you wish to blow through for cleaning, but we do not advise dismantling. For .177 + .22 Specifications Weight 118 grams 19.2 cm long approx 3 cm Wide approx Genuine BSA product. This silencer / moderator is for Unlicensed Airguns only. We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.
£59.95 £58.95
-
GR8Fun Bunny Kill Zone 2 Point Target - GR8Fun
Bunny Kill Zone 2 Point Target - GR8Fun This is a steel target, with 2 kill zones. Simple - shoot one zone to reset the other, no strings required. Kill zone is either a heart/lung or head shot. Powder coated in black with yellow strike plates, easy to see. These are metal parts, powder coated and thus will gain some marks during shipping and they ain't been painted by Picasso, they look good and work well. Designed to be shot at so you will need to repaint as you shoot the paint off. Sits on a metal plate approx 15cm deep, a big double T shape plate. Designed for Sub 12 FT LB Airguns 3.5mm Metal Plate Some home assembly / couple of bolts required. 29cm approx high 18cm approx wide
£27.99
-
Caldwell Caldwell Accumax Premium Carbon Fibre Bipod - Pic Rail - 13-30 inch
Caldwell Accumax Premium Carbon Fibre Bipod - Pic Rail - 13-30 inch Achieve maximum accuracy with the Caldwell Accumax Carbon Fibre Bipod. The Accumax Premium Carbon Fibre Bipod attaches for easy and secure lock-up. It features quick-deployment carbon fibre legs with 90 degree forward locking method or backward method with spring-loaded buttons. The Premium Carbon Fiber Bipod also features an omni-directional ball mount for 360 degree panning, a lever lock handle for fast adjustments, and of course, twist-lock leg length adjustments. 13inch - 30inch Picatinny Rail
£249.99
-
Caldwell Caldwell Accumax Premium Carbon Fibre Bipod - Swivel Stud - 13-30 inch
Caldwell Accumax Premium Carbon Fibre Bipod - Swivel Stud - 13-30 inch Achieve maximum accuracy with the Caldwell Accumax Carbon Fibre Bipod. The Accumax Premium Carbon Fibre Bipod attaches for easy and secure lock-up. It features quick-deployment carbon fibre legs with 90 degree forward locking method or backward method with spring-loaded buttons. The Premium Carbon Fibre Bipod also features an omni-directional ball mount for 360 degree panning, a lever lock handle for fast adjustments, and of course, twist-lock leg length adjustments. 13inch - 30inch Swivel Stud
£252.99 £149.99
-
Caldwell Caldwell Accumax Premium Carbon Fibre Bipod - Swivel Stud - 6-9 inch
Caldwell Accumax Premium Carbon Fibre Bipod - Swivel Stud - 6-9 inch Achieve maximum accuracy with the Caldwell Accumax Carbon Fibre Bipod. The Accumax Premium Carbon Fibre Bipod attaches for easy and secure lock-up. It features quick-deployment carbon fibre legs with 90 degree forward locking method or backward method with spring-loaded buttons. The Premium Carbon Fibre Bipod also features an omni-directional ball mount for 360 degree panning, a lever lock handle for fast adjustments, and of course, twist-lock leg length adjustments. 6inch - 9inch Swivel Stud
£157.99
-
Caldwell Caldwell Accumax Premium Carbon Fibre Bipod - Swivel Stud - 9-13 inch
Caldwell Accumax Premium Carbon Fibre Bipod - Swivel Stud - 9-13 inch Achieve maximum accuracy with the Caldwell Accumax Carbon Fibre Bipod. The Accumax Premium Carbon Fibre Bipod attaches for easy and secure lock-up. It features quick-deployment carbon fibre legs with 90 degree forward locking method or backward method with spring-loaded buttons. The Premium Carbon Fibre Bipod also features an omni-directional ball mount for 360 degree panning, a lever lock handle for fast adjustments, and of course, twist-lock leg length adjustments. 9inch - 13inch Swivel Stud
£173.99
-
Caldwell Caldwell DeadShot Shooting Bags Set of 2 (Front & Rear Bag, Unfilled)
Caldwell DeadShot Shooting Bags Set of 2 (Front & Rear Bag, Unfilled) Every hunter and shooter is looking for a versatile and steady shooting system that can be set up almost anywhere, and at any time. Whether you have minutes or seconds to set up for your next shot, the DeadShot® Shooting Bags are the answer. DeadShot Shooting Bags continue to set the industry standard for quality and function. THESE ARE UNFILLED BAGS - WE SUGGEST DRY SAND OR CAT LITTER
£36.99 £31.99
-
Caldwell Caldwell Tack Driver Shooting Bag - Unfilled
Caldwell Tack Driver Shooting Bag - Unfilled The most user-friendly and effective one-piece shooting bag takes the place of two. You can use the Tack Driver almost anywhere, from portable and permanent shooting benches to makeshift positions in the field.- Self-tightening surface grips your rifle and reduces felt recoil- Non-marring, non-slip surface will not harm your rifle's finish- Supports almost any rifle or shotgun type- Shoulder carrying strap included. THESE ARE UNFILLED BAGS - WE SUGGEST DRY SAND OR CAT LITTER
£53.99 £48.99
-
Caldwell Caldwell The Rock Jr - Front Rifle Rest
Caldwell The Rock Jr - Front Rifle Rest The Caldwell Rock Jr. features many of the same features as The Rock Shooting Rest, but in a sleeker and more economical package. For sighting-in, test firing, and informal competition, its tough to beat a Rock Jr. Y-shaped base dispersed over 5.5lb rest 3/4" diameter steel elevation post Filled Medium Varmint front bag included with rest 10" diameter base Interchangeable rubber feet or metal spiked feet
£63.99
-
Viper Tactical Camo Tape - Black - Viper Tactical
Camo Tape - Black - Viper Tactical Tac-Wrap Tape - Sticks to Itself and not Your Gear. Self Clinging, soft woven camo tape black coloured for covering all hunting equipment - reusable. Works like a bandage on your equipment. 50mm wide x 4.5m Long
£5.85
-
Viper Tactical Camo Tape - Camo - Viper Tactical
Camo Tape - Camo - Viper Tactical Tac-Wrap Tape - Sticks to Itself and not Your Gear. Self Clinging, soft woven camouflage tape for covering all hunting equipment - reusable. Works like a bandage on your equipment. 50mm wide x 4.5m Long
£5.85
-
Viper Tactical Camo Tape - Green - Viper Tactical
Camo Tape - Green - Viper Tactical Tac-Wrap Tape - Sticks to Itself and not Your Gear. Self Clinging, soft woven camo tape green coloured for covering all hunting equipment - reusable. Works like a bandage on your equipment. 50mm wide x 4.5m Long
£5.85
-
Webtex Camo Tape - High Strength - 10m Fabric Tape
Camo Tape - High Strength - 10m Fabric Tape This will stick to your gear, and is high strength. High strength adhesive camo fabric tape Length: 10m Width: 50mm
£6.85
-
Viper Tactical Camo Tape - Sand - Viper Tactical
Camo Tape - Sand - Viper Tactical Tac-Wrap Tape - Sticks to Itself and not Your Gear. Self Clinging, soft woven camo tape sand coloured for covering all hunting equipment - reusable. Works like a bandage on your equipment. 50mm wide x 4.5m Long
£5.85
-
David Nickerson Canvas Game Carriers - Double Loop
Canvas Game Carriers - Double Loop Canvas strap with metal forks which are covered to protect against the elements.
£12.99
-
David Nickerson Canvas Game Carriers - Single Loop
Canvas Game Carriers - Single Loop Canvas strap with metal forks which are covered to protect against the elements.
£12.99 £9.99
-
Jack Pyke Certificate Holder - Black
Certificate Holder - Black Fits Shotgun & Firearms certificates 600D Cordura with window Press stud fastener Colours: English Oak Evolution, Black
£4.99
-
Jack Pyke Compass on Lanyard - Mil-Com
Compass on Lanyard - Mil-Com Ideal for walking, outdoor sports and people learning orienteering. Clam packed Diameter: 5cm (approx.) Diameter: 5cm (approx.)
£3.99
-
Crosman Crosman Hollow Point .177 - 7.9g
Crosman Hollow Point .177 - 7.9g Hollow point pellets loved by many for pest control / hunting. 500 Per Tin 7.9g Best performance is achieved by washing and weighing pellets to gain optimal consitency. We always pack to the best of our ability the pellets when shipping. 18+ Restricted. UK Law - You MUST be over 18 years old to purchase - if you purchase you are legally declaring you are over 18 years old. Full Checkout Terms and Explanation of this can be found HERE
£9.49
-
Crosman Crosman Premier Piranha Pellets .177 / 10.5g - 400 Tin
Crosman Premier Piranha Pellets .177 / 10.5g With a rounded top and star-shaped cut-in, the Piranha is optimized to deliver the penetration of a domed pellet with the expansion of a hollow point.The Piranha is the perfect choice for small game hunting. 400 Per Tin .177 Caliber 10.5gr Best performance is achieved by washing and weighing pellets to gain optimal consitency. We always pack to the best of our ability the pellets when shipping. 18+ Restricted. UK Law - You MUST be over 18 years old to purchase - if you purchase you are legally declaring you are over 18 years old. Full Checkout Terms and Explanation of this can be found HERE
£10.99
-
Crosman Crosman Premier Piranha Pellets .22 / 14.3g - 400 Tin
Crosman Premier Piranha Pellets .22 14.3g - 400 Tin With a rounded top and star-shaped cut-in, the Piranha is optimized to deliver the penetration of a domed pellet with the expansion of a hollow point.The Piranha is the perfect choice for small game hunting. 400 Per Tin .22 Caliber 14.3gr Best performance is achieved by washing and weighing pellets to gain optimal consitency. We always pack to the best of our ability the pellets when shipping. 18+ Restricted. UK Law - You MUST be over 18 years old to purchase - if you purchase you are legally declaring you are over 18 years old. Full Checkout Terms and Explanation of this can be found HERE
£11.24
-
GR8Fun Crow Kill Zone 2 Point Target - GR8Fun
Crow Kill Zone 2 Point Target - GR8Fun This is a steel target, with 2 kill zones. Simple - shoot one zone to reset the other, no strings required. Kill zone is either a heart/lung or head shot. Powder coated in black with yellow strike plates, easy to see. These are metal parts, powder coated and thus will gain some marks during shipping and they ain't been painted by Picasso, they look good and work well. Designed to be shot at so you will need to repaint as you shoot the paint off. Sits on a metal plate approx 15cm deep, a big double T shape plate. Designed for Sub 12 FT LB Airguns 3.5mm Metal Plate Some home assembly / couple of bolts required. 29cm approx high 15cm approx wide
£27.99
-
Daystate Daystate - .22 Self Indexing Magazine - NEW Model - 11 Shot
Daystate - .22 Self Indexing Magazine - NEW Model - 11 Shot This is the NEW flip front self indexing magazine from Daystate. CHECK THE COMPATIBILITY LIST BELOW !!!! It wont work in older models. If your rifle is NOT listed below, you need to buy the OLD Daystate Magazine. Huntsman RegalHuntsman Regal HRHuntsman RevereWolverine 1Wolverine 2Wolverine RRedwolfPulsarRenegadeRenegade HR Ships with the pin in the bag for the user to decide which side to load from - the user must fit this pin - we offer no home fitting service. Yes its had .22 printed on the front - nothing to do with us, and it arrives in a clear bag, no fancy packaging.
£76.99
-
Best Fittings Daystate Regal Regulated Fill Probe
Daystate Regal Regulated Fill Probe Current Style Air Arms Female Fill Adaptor. Suits the Air Arms S400/S410/S200, S510, Alpha Pistol etc This is the “Egg Cup” hose fitting with the ‘T BAR” slot to locate on the new style fill valve with the ‘T BAR” retainer on the end of the filling valve. Also fits early ‘New Style’ valves without the T bar on the end of the fill valve. (Quite rare) CAUTION - You are working with high pressure air, always be safe. Airgun 101 Shop is not responsible for any injury / damage to any person, third party or item when using this part.
£15.00
-
Donny FL Donny FL - El Gato Muerto Performance Hoodie
El Gato Muerto Performance Hoodie Get ready to pounce on the ultimate style sensation with the El Gato Muerto Performance Hoodie with UPF 50 by Disco Donny! This limited-time offer is a game-changer that fuses fashion and functionality into one purr-fect package. Crafted with sublimated dry fit technology, this hoodie keeps you cool and comfortable in the most stylish way possible. The mesmerizing design, meticulously printed all over, will make you the envy of the party, the gym, or wherever your adventures take you. The sublimated print is a work of art, showcasing vibrant colors and intricate patterns that scream individuality. The El Gato Muerto Performance Hoodie by Disco Donny is a limited-time offer, so act fast and get your hands on this remarkable piece of wearable art before it's gone. Size Guide - In INCHES SIZE IN INCHES S M L XL 2 XL 3XL Body Length at Front 24 25 26 27 28 TBC Chest Width 18 20 21 23 25 TBC
£49.99
-
Donny FL Donny FL - Fatboy Trucker Cap/Hat 2.0
Donny FL - Fatboy Trucker Cap/Hat 2.0 Black/Red with Black/White rubber patch logo. Fabric: 100% cotton front panels and bill, 100% polyester mid and back panels. Structure: Structured Profile: High Closure: 7-position adjustable snap
£15.99
-
Donny FL Donny FL - T Shirt - Red or Black
Donny FL - T Shirt - Red or Black Donny FL T'Shirt Worn worldwide by Airgunner's who know a quality moderator and product. Available in Red or Black. Available for the first time direct in the UK. Features: 100% combed ring-spun cotton 4.3 oz Super Soft Baby rib-knit set collar Size Guide - In INCHES SIZE IN INCHES S M L XL 2 XL 3XL 4XL Body Length at Back 28 2 30 31 32 33 34 Chest Width 17 19 20 22 25 26 27 BODY LENGTH AT BACK Measured from high point shoulder to finished hem at the back CHEST WIDTH Measured across the chest one inch below the armhole when laid flat International Shipping If you do NOT see your country listed on checkout, please email us and we will happily provide you a quote. We do recommend you always select tracked postage, we are not liable for any loss in items sent worldwide if you choose cheap uninsured postage. Therefore we alway recommend tracked postage. We do ship clothing to countries outside of the UK and EU. We do restrict other Gun accessories - thus if you attach anything other than clothing or scope stickers your order will NOT be shipped.
£15.99
-
Donny FL DonnyFL - AEA Element MAX AR-Style Grip Adapter
AEA Element MAX AR-Style Grip Adapter Product description Personalize Your Grip: Customize your AEA Element MAX air rifle with the AEA Element MAX AR-Style Grip Adapter. This adapter allows you to replace the factory grip with any AR-compatible grip, providing a comfortable and personalized shooting experience. Make sure you are buying the right one for your rifle - if you get it wrong return it is down to you and we will not accept back if you have tried to fit it. Features: Enhanced Ergonomics: Choose a grip that perfectly fits your hand size and shooting style. Improved Control: Increased comfort and stability lead to better accuracy and control. Durable Construction: Made from 6061 Aluminum for long-lasting performance. Sleek Finish: Black anodized for a professional look. Easy Installation: Simple to install and remove. Based on customer feedback this one also fits the AEA Megaladon! Upgrade Your Comfort and Control: Take your AEA Element MAX to the next level with a custom grip. Order the AEA Element MAX AR-Style Grip Adapter today at DonnyFL! This is a home fit item, we supply no instructions or aftersale service. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site.
£43.99
-
Donny FL DonnyFL - Endcap M34 - Ronin Emperor - Vulcan
DonnyFL - Endcap M34 - Ronin Emperor - Vulcan Endcap ONLY Product description Customize Your Moderator: Enhance the versatility of your DonnyFL Ronin or Emperor Extender with these Interchangeable Extender Endcaps. This is M34. One per pack. Key Features: Compatibility: Designed to fit the 2" by 6" Ronin/Emperor moderator. This silencer / moderator adapter is for Unlicensed Airguns only. We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site.
£37.99
-
Donny FL DonnyFL - Fat Boy 2.0 Extender Tube 1/2x20 ( Extender Only )
DonnyFL - Fat Boy 2.0 Extender Tube 1/2x20 ( Extender Only ) Need to make the fat boy quieter? You can add this 3 inch extender to capture more air and reduce the muzzle blast some more. Features: 6061 T6 Aluminum Black anodize Matching outer tube design to the fat boy Also compatible with the Ronin and Emperor These arrive in bubble wrapping / OEM - no fancy box. This silencer / moderator extender is for Unlicensed Airguns only. We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. If your require the .25 - .30 Stripper contact us for production of FAC
£51.99 £51.49
-
Donny FL DonnyFL - Huben GK1 Pistol Moderator Adapter
DonnyFL - Huben GK1 Pistol Moderator Adapter Product description This adapter allows you to add a 1/2 x 20 moderator or muzzle brake to your fun little pistol. Features: 6061 T6 Aluminum Black Anodize Knurled thread protector This silencer / moderator adapter is for Unlicensed Airguns only. We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site.
£34.99
-
Donny FL DonnyFL - KOI Silencer Size 22 - .177 Calibre 1/2x20Unf
DonnyFL - KOI Silencer Size 22 - .177 Calibre 1/2x20Unf 1.22” DIAMETER - 7" Length With a rugged front cap design, signature DonnyFL body grooves, and bolt endcap, the KOI is a fantastic addition to any shrouded or un-shrouded air rifle. It has the smallest outer diameter compared to other DonnyFL models, but don't let the size fool you—it's just as impressive! Key Features: Mono-core Design: Precision CNC machined by professional machinists. Durable Construction: Sandblasted and anodized for maximum durability. Swappable Rear End Caps: This comes with with 1/2 x 20 Bolt Noise Reduction: Comes pre-wrapped in felt for enhanced sound suppression. Easy Handling: Machined grooves on the outside for a secure grip. Protective Transport: Comes with a protective red tube for easy transport and storage. Weight Specifications: With 1/2 x 20 Bolt rear end cap: 4.7 oz This silencer / moderator is for Unlicensed Airguns only. We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.
£144.99 £141.99
-
Donny FL DonnyFL - KOI Silencer Size 25 - .22 Calibre 1/2x20Unf
DonnyFL - KOI Silencer Size 25 - .22 Calibre 1/2x20Unf 1.22” DIAMETER - 7" Length With a rugged front cap design, signature DonnyFL body grooves, and bolt endcap, the KOI is a fantastic addition to any shrouded or un-shrouded air rifle. It has the smallest outer diameter compared to other DonnyFL models, but don't let the size fool you—it's just as impressive! Key Features: Mono-core Design: Precision CNC machined by professional machinists. Durable Construction: Sandblasted and anodized for maximum durability. Swappable Rear End Caps: This comes with with 1/2 x 20 Bolt Noise Reduction: Comes pre-wrapped in felt for enhanced sound suppression. Easy Handling: Machined grooves on the outside for a secure grip. Protective Transport: Comes with a protective red tube for easy transport and storage. Weight Specifications: With 1/2 x 20 Bolt rear end cap: 4.7 oz This silencer / moderator is for Unlicensed Airguns only. We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.
£144.99 £141.99
-
Donny FL DonnyFL - Muzzle Break QD M84 - Quick Disconnect
DonnyFL - Muzzle Break QD M84 - Quick Disconnect This muzzle brake or air stripper attaches to the front of any air rifle equipped with a DonnyFL Quick Disconnect Adapter. The thread for the adapter is 1/2 Inch UNF - thats the bit that goes on the end of the barrel. Features: Made of aluminum 6061 T6 Black anodize Weights 2.9 oz Comes with M58 Air Stripper Insert Kit. - 2 x .177/.22 - 2 x .22/.25 - 2 x .25/.30 Approx 4.5 cm wide Approx 6.5cm long This silencer / moderator / muzzle break is for Unlicensed Airguns only. We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. If your require the .25 - .30 Stripper contact us for production of FAC
£128.99
-
Donny FL DonnyFL - Quick Disconnect (QD) Rear Caps and Adapter for Old Moderators
DonnyFL - Quick Disconnect (QD) Rear Caps and Adapter for Old Moderators If you own a Sumo, Tatsu, Ronin, Shogun, Tanto, Emperor or FX DonnyFl moderator and want to convert it to a QD. This conversion kit will allow you to do so. Compatibility: Will not work on old moderators with the flat front cap. Features: Indexed so it locks on at same position every time Made of 7075 aluminum Grey anodized Includes barrel/shroud adapter and rear cap Select the barrel thread specific to your airgun Sizes Available - you need to select one, it's one size adapter per order. Sumo/Tatsu/Shogun - 1/2 x 20 M71 Tanto/KOI 1/2 x 20 M73 Ronin/Emperor/Fatboy2.0 1/2 x 20 M72 Ronin/Emperor/Fatboy2.0 M18x1 M86 FX DonnyFL 1/2 x 20 M74 FX DonnyFL M18x1 M87 QD Thread Adapters ONLY QD Thread Adapter Only M18x1 M76 QD Thread Adapter Only M20x1 M77 QD Thread Adapter Only 1/2Unf M78 This silencer / moderator is for Unlicensed Airguns only. We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings.
£24.99 - £62.99
-
Donny FL DonnyFL - Ronin Silencer Size 25 - .22 Calibre 1/2x20Unf
DonnyFL - Ronin Silencer Size 25 - .22 Calibre 1/2x20Unf 2” DIAMETER - 6.25" Length The Ronin is big, bold, and designed to impress. While it may be overkill for .177 and .22 calibers, it looks incredibly awesome and performs exceptionally well. Key Features: Interchangeable Rear Caps: Comes with 1/2 Inch UNF - others are extra cost. Mono-core Design: Increases accuracy and limits the chances of pellet clipping. Durable Construction: No moving parts or epoxy that may become loose after thousands of rounds. Precision CNC by professional machinists, sandblasted, and anodized for maximum durability. Easy Maintenance: Can be taken apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No hex key or torch is needed. Customizable Sound Dampening: Further dampen the sound by wrapping the interior tube with different sound-absorbing materials. Comes pre-wrapped in felt. User-Friendly Design: Machined grooves on the outside for easy handling. Lightweight: Weighs around 10.4 oz for easy handling. Convenient Transport: Comes with a protective red tube for easy transport and storage. Visual Notes: If you see white lines on the inside of the front cap, that's normal. They were caused by the prongs holding the pieces while anodizing, not pellet clippings. This silencer / moderator is for Unlicensed Airguns only. We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.
£218.99 £215.99
-
Donny FL DonnyFL - Ronin Silencer Size 30 - .25 Calibre 1/2x20Unf
DonnyFL - Ronin Silencer Size 30 - .25 Calibre 1/2x20Unf 2” DIAMETER - 6.25" Length The Ronin is big, bold, and designed to impress. While it may be overkill for .177 and .22 calibers, it looks incredibly awesome and performs exceptionally well. Key Features: Interchangeable Rear Caps: Comes with 1/2 Inch UNF - others are extra cost. Mono-core Design: Increases accuracy and limits the chances of pellet clipping. Durable Construction: No moving parts or epoxy that may become loose after thousands of rounds. Precision CNC by professional machinists, sandblasted, and anodized for maximum durability. Easy Maintenance: Can be taken apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No hex key or torch is needed. Customizable Sound Dampening: Further dampen the sound by wrapping the interior tube with different sound-absorbing materials. Comes pre-wrapped in felt. User-Friendly Design: Machined grooves on the outside for easy handling. Lightweight: Weighs around 10.4 oz for easy handling. Convenient Transport: Comes with a protective red tube for easy transport and storage. Visual Notes: If you see white lines on the inside of the front cap, that's normal. They were caused by the prongs holding the pieces while anodizing, not pellet clippings. This silencer / moderator is for Unlicensed Airguns only. We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.
£218.99 £215.99
-
Donny FL DonnyFL - RYU Quick Release 22 Silencer - .22 Calibre 1/2x20Unf
DonnyFL - RYU Quick Release 22 Silencer - .22 Calibre 1/2x20Unf 1.2” DIAMETER Introducing DonnyFLs Quick Disconnect moderators. These precision-engineered moderators feature a quick detach system, ensuring consistent shooting performance with no point-of-impact changes after detaching and re-attaching. These moderators are caliber specific compared to previous versions. Crafted from high-grade aluminium, theyre robust and modular to adapt to your shooting needs. Donny FL recommends that if you are using a floating barrel (where there is space between the end of the barrel and the end of the shroud) or a barrel supported by an internal or external air stripper it is not advised to use a heavy moderator of any brand on your rifle. This can cause weight issues or droop at the end which may result in clipping. If you have this as a setup then the Yokozuna or Ryu is not for you, chose a fixed lighter moderator ( Non QD system which reduces weight like a fixed thread and smaller moderator) Not the moderators fault its the setup of the rifle. If you have a barrel which screws directly into a shroud, like an FX Smooth Twist barrel system then you should be fine, however it is still recommended to go a calibre higher. If you buy this and claim it clips we have told you - thus not our responsibility. As with any QD system a minute amount of play is possible follow the above tips to help avoid any issues. Main Features Indexed locking system for consistent position and no point of impact changes. Quick detachment for easy storage and reattachment for shooting. Comes with a 1/2 x 20 female (barrel/shroud) thread adapter. Modular design for length adjustment. Crafted from 6061 T6 aluminium (individual sections) and 7075 aluminium (main QD housing and adapter). This silencer / moderator is for Unlicensed Airguns only. We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.
£183.99 £174.99
-
Donny FL DonnyFL - RYU Quick Release 25 Silencer - .25 Calibre 1/2x20Unf
DonnyFL - RYU Quick Release 25 Silencer - .25 Calibre 1/2x20Unf 1.2” DIAMETER Introducing DonnyFLs Quick Disconnect moderators. These precision-engineered moderators feature a quick detach system, ensuring consistent shooting performance with no point-of-impact changes after detaching and re-attaching. These moderators are caliber specific compared to previous versions. Crafted from high-grade aluminium, theyre robust and modular to adapt to your shooting needs. Donny FL recommends that if you are using a floating barrel (where there is space between the end of the barrel and the end of the shroud) or a barrel supported by an internal or external air stripper it is not advised to use a heavy moderator of any brand on your rifle. This can cause weight issues or droop at the end which may result in clipping. If you have this as a setup then the Yokozuna or Ryu is not for you, chose a fixed lighter moderator ( Non QD system which reduces weight like a fixed thread and smaller moderator) Not the moderators fault its the setup of the rifle. If you have a barrel which screws directly into a shroud, like an FX Smooth Twist barrel system then you should be fine, however it is still recommended to go a calibre higher. If you buy this and claim it clips we have told you - thus not our responsibility. As with any QD system a minute amount of play is possible follow the above tips to help avoid any issues. Main Features Indexed locking system for consistent position and no point of impact changes. Quick detachment for easy storage and reattachment for shooting. Comes with a 1/2 x 20 female (barrel/shroud) thread adapter. Modular design for length adjustment. Crafted from 6061 T6 aluminium (individual sections) and 7075 aluminium (main QD housing and adapter). This silencer / moderator is for Unlicensed Airguns only. We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.
£183.99 £174.99
-
Donny FL DonnyFL - Shogun Silencer Size 25 - .22 Calibre 1/2x20Unf
DonnyFL - Shogun Silencer Size 25 - .22 Calibre 1/2x20Unf 1.6” DIAMETER - 8" Length If you thought the Sumo was quiet, wait until you hear the Shogun! The Shogun features the same diameter as the Sumo but is 1.5 inches longer, providing additional noise reduction. With an extra 1-inch chamber and expanded first and exit chambers, this design is highly effective in reducing noise. Key Features: Superior Noise Reduction: Additional 1-inch chamber and increased first and exit chambers for enhanced sound suppression. Interchangeable Threaded End Caps: Choose from various threaded end caps for versatile compatibility - not included. This comes with Bolt end cap. Mono-core Design: Increases accuracy and limits the chances of pellet clipping. Durable Construction: No moving parts or epoxy that may become loose after thousands of rounds. Precision CNC'd by professional machinists, sandblasted, and anodized for maximum durability. Easy Maintenance: Can be taken apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No key or torch needed. Customizable Sound Dampening: Further dampen the sound by wrapping the interior tube with different sound-absorbing materials. Comes pre-wrapped in felt. User-Friendly Design: Machined grooves on the outside for easy handling. Lightweight: Weighs just 7.2 oz for easy handling. Convenient Transport: Comes with a protective red tube for easy transport and storage. Visual Notes: If you see white lines on the inside of the front cap, that's normal. They were caused by the prongs holding the pieces while anodizing, not pellet clippings. This silencer / moderator is for Unlicensed Airguns only. We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.
£218.99 £215.99
-
Donny FL DonnyFL - Shogun Silencer Size 30 - .25 Calibre 1/2x20Unf
DonnyFL - Shogun Silencer Size 30 - .25 Calibre 1/2x20Unf 1.6” DIAMETER - 8" Length If you thought the Sumo was quiet, wait until you hear the Shogun! The Shogun features the same diameter as the Sumo but is 1.5 inches longer, providing additional noise reduction. With an extra 1-inch chamber and expanded first and exit chambers, this design is highly effective in reducing noise. Key Features: Superior Noise Reduction: Additional 1-inch chamber and increased first and exit chambers for enhanced sound suppression. Interchangeable Threaded End Caps: Choose from various threaded end caps for versatile compatibility - not included. This comes with Bolt end cap. Mono-core Design: Increases accuracy and limits the chances of pellet clipping. Durable Construction: No moving parts or epoxy that may become loose after thousands of rounds. Precision CNC'd by professional machinists, sandblasted, and anodized for maximum durability. Easy Maintenance: Can be taken apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No key or torch needed. Customizable Sound Dampening: Further dampen the sound by wrapping the interior tube with different sound-absorbing materials. Comes pre-wrapped in felt. User-Friendly Design: Machined grooves on the outside for easy handling. Lightweight: Weighs just 7.2 oz for easy handling. Convenient Transport: Comes with a protective red tube for easy transport and storage. Visual Notes: If you see white lines on the inside of the front cap, that's normal. They were caused by the prongs holding the pieces while anodizing, not pellet clippings. This silencer / moderator is for Unlicensed Airguns only. We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.
£218.99 £215.99
-
Donny FL DonnyFL - Skout Epoch Adapter 1/2 x 20 A108
Skout Epoch Adapter 1/2 x 20 A108 If you decide not to use the factory Skout moderator, use this adapter to allow you to screw on a different moderator with 1/2 x 20 threads. Features: 6061 Aluminum Black anodize Knurled thread protector Compatible up to .30 caliber This silencer / moderator adapter is for Unlicensed Airguns only. We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site.
£41.99
-
Donny FL DonnyFL - Skout Epoch Adapter M18x1 A112
Skout Epoch Adapter M18x1 A112 If you decide not to use the factory Skout moderator, use this adapter to allow you to screw on a different moderator with 1/2 x 20 threads. Features: 6061 Aluminum Black anodize Knurled thread protector Made for the .357 caliber Skout This silencer / moderator adapter is for Unlicensed Airguns only. We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site.
£41.99
-
Donny FL DonnyFL - Threaded Rear Housing for The Yokozuna 1/2 UNF
DonnyFL - Threaded Rear Housing for The Yokozuna 1/2 x 20 M80 - 1/2 Inch UNF If you already have the Yokozuna with the quick detach housing and want to convert it to a straight threaded attachment, you can now do so with this threaded rear housing. Key Features: High-Quality Construction: Made from 7075 aluminum for durability and strength. Sleek Finish: Black anodized for a sleek and durable finish. Compatibility: Converts your Yokozuna from quick detach to a straight threaded attachment, currently available in 1/2 x 20. Important Information: Future Compatibility: More thread options will be available for different airgun models in the future. Intended Use: The products on DonnyFL are intended for use on airguns only. Upgrade your Yokozuna moderator with the DonnyFL Threaded Rear Housing and enjoy enhanced compatibility and performance. Order now and customize your airgun setup to fit your needs! This silencer / moderator adapter is for Unlicensed Airguns only. We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site.
£34.99
-
Donny FL DonnyFL - Yokozuna Extender .22 1/2 Inch UNF M97
DonnyFL - Yokozuna Extender .22 1/2 Inch UNF M97 Extender Only If you need an extra or spare extender for your .22 Yokozuna - here it is. This is just the extender only. Product description Customize the size of your Yokozuna or replace sections of your unit with these individual parts. Please note I would not add more than 2 extra baffles on top of the factory units. If you plan to do so, I would recommend going one caliber size up. This also applies to extenders, you may cause clipping if you make the moderator too long. This silencer / moderator adapter is for Unlicensed Airguns only. We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site.
£37.99
-
Donny FL DonnyFL FX Airgun Pro Size 22-25 Silencer - .177 - .22 Calibre 1/2x20UNF
DonnyFL FX Airgun Pro Size 22-25 Silencer - .177 - .22 Calibre 1/2x20UNF This is a custom size that comes with your FX airguns if you decide to upgrade the suppressor. Same length as the Tanto but slightly larger in diameter, comparable to the FX factory suppressor. This weights around 4.7 ounces. Comes with protective red tube for easy transport and storage. Built in collaboration with FX Airguns the airgun pro silencer offers maximum performance in a compact package. Available in .22-25 & .25-30 Precision cncd Approx weight 4.5 oz Mono-core design to increase accuracy and limit the chances of pellet clipping Sand blasted and anodized for maximum durability Comes pre-wrapped in felt Customizable - you can further dampen the sound Take apart in less than 10 seconds 1.36 x 5 inches As Donny FL moderators screw onto the shroud of your FX Airgun, DonnyFL would recommend going a size up when choosing your moderator. For example, if youre looking for a .177 DonnyFL would recommend using a .22. or if youre looking .25, you should opt for a .30 This silencer / moderator is for Unlicensed Airguns only. We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site. *Note: If you see white lines on the inside of the front cap, thats ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. We can only send this item direct to you if it is being used on an sub 12ftlb airgun only (not on a high power license). By purchasing you are confirming that this is the case.
£119.99
You have seen 96 out of 594 products