Age verification
Please confirm that you are 18 years or older to enter the shop.
Have patience...
You are not old enough to visit the shop yet.
Products
GR8Fun Bottle Target Blanks Holder - GR8Fun
Bottle Target Blanks Holder - GR8Fun This is a steel target, designed for Sub 12 FT LB airguns, and it brings a huge smile to the shooter. Load the holes with .22 crimped blanks, and then be super accurate with your shooting, and when you are the bang is the reward. .22 Crimped blanks can be bought by anyone over 18 yrs from your local Gun Store - usually in packs of 100 for under £10 - thats a lot of bang for your buck, much better value than single shot exploding targets. This target holder ships WITHOUT blanks, you need to purchase them from your local gun store, they should not be purchased through the post - Royal Mail banned item. 3.5mm Metal Plate 5.5mm approx target holes Some home assembly / couple of bolts required. When loaded this will go bang, so best used where it won't annoy the neighbours.
£21.99
-
GR8Fun Bunny Kill Zone 2 Point Target - GR8Fun
Bunny Kill Zone 2 Point Target - GR8Fun This is a steel target, with 2 kill zones. Simple - shoot one zone to reset the other, no strings required. Kill zone is either a heart/lung or head shot. Powder coated in black with yellow strike plates, easy to see. These are metal parts, powder coated and thus will gain some marks during shipping and they ain't been painted by Picasso, they look good and work well. Designed to be shot at so you will need to repaint as you shoot the paint off. Sits on a metal plate approx 15cm deep, a big double T shape plate. Designed for Sub 12 FT LB Airguns 3.5mm Metal Plate Some home assembly / couple of bolts required. 29cm approx high 18cm approx wide
£27.99
-
GR8Fun Crow Kill Zone 2 Point Target - GR8Fun
Crow Kill Zone 2 Point Target - GR8Fun This is a steel target, with 2 kill zones. Simple - shoot one zone to reset the other, no strings required. Kill zone is either a heart/lung or head shot. Powder coated in black with yellow strike plates, easy to see. These are metal parts, powder coated and thus will gain some marks during shipping and they ain't been painted by Picasso, they look good and work well. Designed to be shot at so you will need to repaint as you shoot the paint off. Sits on a metal plate approx 15cm deep, a big double T shape plate. Designed for Sub 12 FT LB Airguns 3.5mm Metal Plate Some home assembly / couple of bolts required. 29cm approx high 15cm approx wide
£27.99
-
GR8Fun Dove / Pigeon Kill Zone 2 Point Target - GR8Fun
Dove/Pigeon Kill Zone 2 Point Target - GR8Fun This is a steel target, with 2 kill zones. Simple - shoot one zone to reset the other, no strings required. Kill zone is either a heart/lung or head shot. Powder coated in black with yellow strike plates, easy to see. These are metal parts, powder coated and thus will gain some marks during shipping and they ain't been painted by Picasso, they look good and work well. Designed to be shot at so you will need to repaint as you shoot the paint off. Sits on a metal plate approx 15cm deep, a big double T shape plate. Designed for Sub 12 FT LB Airguns 3.5mm Metal Plate Some home assembly / couple of bolts required. 27cm approx diagonal width 15cm approx wide
£27.99
-
GR8Fun GR8Fun Airgun Targets - 10mm Spinning Single Target
GR8Fun Airgun Targets - 10mm Spinning Single Target A simple steel spinning airgun target, an ideal air rifle target for ultimate accuracy practice. This is a single metal piece, 10mm wide on a bolt which you need to attach to a suitable post or pole. Sold as a Single Spinner Target is 10mm wide Recommended for Sub 12 FT Lb Air Rifles.
£5.49
-
GR8Fun GR8Fun Airgun Targets - 15mm Spinning Single Target
GR8Fun Airgun Targets - 15mm Spinning Single Target A simple steel spinning airgun target, an ideal air rifle target for ultimate accuracy practice. This is a single metal piece, 15mm wide on a bolt which you need to attach to a suitable post or pole. Sold as a Single Spinner Target is 15mm wide Recommended for Sub 12 FT Lb Air Rifles.
£5.49
-
GR8Fun GR8Fun Airgun Targets - 3mm Spinning Single Target
GR8Fun Airgun Targets - 3mm Spinning Single Target A simple steel spinning airgun target, an ideal air rifle target for ultimate accuracy practice. This is a single metal piece, 3mm wide on a bolt which you need to attach to a suitable post or pole. Sold as a Single Spinner Target is 3mm wide Recommended for Sub 12 FT Lb Air Rifles.
£5.49
-
GR8Fun GR8Fun Airgun Targets - 5mm Spinning Single Target
GR8Fun Airgun Targets - 5mm Spinning Single Target A simple steel spinning airgun target, an ideal air rifle target for ultimate accuracy practice. This is a single metal piece, 5mm wide on a bolt which you need to attach to a suitable post or pole. Sold as a Single Spinner Target is 5mm wide Recommended for Sub 12 FT Lb Air Rifles.
£5.49
-
GR8Fun HFT & Standard Double Post Spinner Airgun Target - GR8Fun
HFT & Standard Double Post Spinner Airgun Target - GR8Fun A simple steel spinning airgun target, an ideal air rifle target for HFT practice. 30mm and 20mm top discs, 25mm and 40mm bottom discs. Spike is 25cm high Target is 10cm wide Recommended for Sub 12 FT Lb Air Rifles.
£16.00£15.49
-
GR8Fun Pellet Drop Target - Zeroing Targets - GR8 Fun
Want to see on paper the difference range makes when you shoot then these are ideal for zeroing and learning how to dial your scope for ranges. 100 Targets in a pack 10 Plastic holders included - but can be used as a regular target (stuck to something else) Targets Approx 3 x 4 Inches
£10.49
-
GR8Fun Target Spinner + Target Holder - Red Set - GR8Fun
Target Spinner + Target Holder - Red Set - GR8Fun This is a pole, with a triangle ground spike on the bottom, plus spinners and a paper target holder. Very popular at clubs and for home shooters. The paper target frame at the top, in our experience can be a little wonky as it has to stick up unsupported - but if you ignore that its a great target. 16cm is the width of the target holder - thus conventional 14cm targets will require you to add a bit of extra cardboard backing. Some home assembly is required and 13mm spanner will be needed ( not supplied ) Overall heigh approx 73cm Bit above the spike is 59cm Suitable for rifles up to 12 FT Lbs. They also have a snooker version which can be found here.
£46.99
-
GR8Fun Target Spinner + Target Holder - Snooker Set - GR8Fun
Target Spinner + Target Holder - Snooker Set - GR8Fun This is a pole, with a triangle ground spike on the bottom, plus spinners and a paper target holder. Very popular at clubs and for home shooters. The paper target frame at the top, in our experience can be a little wonky as it has to stick up unsupported - but if you ignore that its a great target. 16cm is the width of the target holder - thus conventional 14cm targets will require you to add a bit of extra cardboard backing. Some home assembly is required and 13mm spanner will be needed ( not supplied ) Overall heigh approx 73cm Bit above the spike is 59cm Suitable for rifles up to 12 FT Lbs. They also have a Red Spinner version which can be found here.
£46.99