Have you got a rifle without a thread for a moderator - then these adapters may help solve your problem. High quality silencer adapters from trusted manufacturers.
Some home fitting is required. So be careful - always safety first.
Have you got a rifle without a thread for a moderator - then these adapters may help solve your problem. High quality silencer adapters from trusted manufacturers.
Some home fitting is required. So be careful - always safety first.
Eaglevision - AGT URAGAN 2, VULCAN 3, 1/2 X 20 UNF Moderator Adaptor This adaptor allows you to connect any standard 1/2 x 20 UNF moderator to your rifleshroud. This item comes with self tightening tools (no other tools required). Fits 177, 22, 25 and 30 caliber. Fits Following Rifles: URAGAN 2, (ALL THE MODELS ) VULCAN 3, ( ALL THE MODELS) More information Female side: Threads size & pitch: M14x1.25 male side: 1/2 UNF X 20 Outer diameter: 38mm Weight: 36grm This is a home install item and we provide no instruction on the fitting. It is an aftermarket fitting and installed entirely at the customers own risk. Airgun 101 Shop is not liable in any way for any damage to any item or harm to any person when using or installing this product.
£34.78
Eaglevision - AGT VIXEN 1/2 X 20 UNF Moderator Adaptor This adaptor allows you to connect any standard 1/2 x 20 UNF moderator to your rifle shroud. VIXEN (ALL THE MODELS ) BE AWARE YOU WILL NEED TO MAKE 4 X HOLES IN THE BAFFEL / BAFFLE FROM YOUR RIFLE - WE ARE NOT RESPONSIBLE IF YOU MESS THIS UP. Please follow this guide, to ensure correct installation. 1. Unscrew and Extract the aluminium baffle. 2. Make a 4x 3mm hole with a 3mm drill bit in your baffle same locations as original holes. 3. Carefully line up the 1/2 x 20 UNF adaptor hole with your baffle, place the screws and tighten up with the supplied locking nuts. 4. Re–insert the baffle and tighten. This adaptor allows you to connect any standard 1/2 x 20 UNF moderator to your rifleshroud. This item comes with self tightening tools (no other tools required). Fits 177, 22, 25 and 30 caliber. The baffle / baffle is NOT included just to show how to install. Male side: 1/2 UNF X 20 Outer diameter: 51mm Weight: 40grm This is a home install item and we provide no instruction on the fitting. It is an aftermarket fitting and installed entirely at the customers own risk. Airgun 101 Shop is not liable in any way for any damage to any item or harm to any person when using or installing this product.
£39.50
Skout Epoch Adapter 1/2 x 20 A108 If you decide not to use the factory Skout moderator, use this adapter to allow you to screw on a different moderator with 1/2 x 20 threads. Features: 6061 Aluminum Black anodize Knurled thread protector Compatible up to .30 caliber This silencer / moderator adapter is for Unlicensed Airguns only. We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site.
£39.99
Skout Epoch Adapter M18x1 A112 If you decide not to use the factory Skout moderator, use this adapter to allow you to screw on a different moderator with 1/2 x 20 threads. Features: 6061 Aluminum Black anodize Knurled thread protector Made for the .357 caliber Skout This silencer / moderator adapter is for Unlicensed Airguns only. We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site.
£39.99
Eaglevision - Kalibrgun Argus 1/2 x 20 UNF Sound Moderator Adapter Fits: Kalibrgun Argus This Adapter allows to connect any standard 1/2 x 20 UNF Moderator to your rifle shroud Comes with self-tightening tools (no other tools required) Fits: 177, 22, 25 and 30 calibers Specifications: Made of aluminium with black anodising Outer diameter: 30mm EAGLEVISION DOE NOT SUPPLY FITTING INSTRUCTIONS. This is a home install item and we provide no instruction on the fitting. It is an aftermarket fitting and installed entirely at the customers own risk. Airgun 101 Shop is not liable in any way for any damage to any item or harm to any person when using or installing this product.
£35.95
Air Venturi Avenger Extender / Umarex Origin 1/2 x 20 Adapter A70 Features: Compatible with .177 caliber to .25 6061 Aluminum T6 Black anodized 1/2 x 20 male threads Note: I would highly recommend the DonnyFL Tanto suppressor for the Avenger. Does a really good job reducing the muzzle report and you do not need to remove it to fill the gun. The adapter goes over the barrel to help center alignment. This reduces the chance of pellet clipping and improves accuracy. !!!!!!!!!!!! IT DOES NOT FIT ANY OF THE AVENGE X SERIES AIRGUNS !!!!!!!!!!!! This silencer / moderator adapter is for Unlicensed Airguns only. We are not responsible for clipping or any misalignment of your barrel. If the moderator is fitted and or used / damaged in any way it is not returnable. We do not ship this item outside of the UK You must be over 18 to purchase this item as declared on entry to the site.
£44.99
Eaglevision - AirgunTechnology URAGAN KING 1/2 UNF Adaptor Fits only to the baffle type like one in the added photo in the description. It does not work with baffles other than the one shown in the picture. This adaptor allows you to connect any standard 1/2 x 20 UNF moderator to your rifleshroud. This item comes with self tightening tools (no other tools required). Fits 177, 22, 25 and 30 caliber. More information Threads size & pitch: M48 x 1 male Outer diameter: 49.50mm EAGLEVISION DOE NOT SUPPLY FITTING INSTRUCTIONS. This is a home install item and we provide no instruction on the fitting. It is an aftermarket fitting and installed entirely at the customers own risk. Airgun 101 Shop is not liable in any way for any damage to any item or harm to any person when using or installing this product.
£41.95
Eaglevision - SMK Artemis Alpha Nova Seneca Aspen / Vista Liberty 1/2 x 20 UNF Moderator Adapter Fits: SMK Artemis Alpha MOD Nova Seneca Aspen / Vista Liberty This Adapter allows to connect any standard 1/2 x 20 UNF Moderator to your rifle shroud Comes with self-tightening tools (no other tools are required) Fits: 177, 22, 25 and 30 calibers Specs: Made from aluminium with black anodising Shroud side – thread’s size and pitch: M24 x 1 Outer diameter: 25 mm EAGLEVISION DOE NOT SUPPLY FITTING INSTRUCTIONS. This is a home install item and we provide no instruction on the fitting. It is an aftermarket fitting and installed entirely at the customers own risk. Airgun 101 Shop is not liable in any way for any damage to any item or harm to any person when using or installing this product.
£29.95
Eaglevision - Air Max MKII, SMK, Artemis, PP700S-A - 1/2 UNF x 20 Moderator Adaptor Fits - Air Max MKII, SMK, Artemis, PP700S-A Made of Aluminium Anodised Matt Black. Allows for the fitting of any standard female 1/2″ UNF silencer. This item comes with self tightening tools (no other tools required). More information Threads size & pitch: M8 x1 female Outer diameter: 20mm EAGLEVISION DOE NOT SUPPLY FITTING INSTRUCTIONS. This is a home install item and we provide no instruction on the fitting. It is an aftermarket fitting and installed entirely at the customers own risk. Airgun 101 Shop is not liable in any way for any damage to any item or harm to any person when using or installing this product.
£25.99
Please confirm that you are 18 years or older to enter the shop.
You are not old enough to visit the shop yet.