Age verification
Please confirm that you are 18 years or older to enter the shop.
Have patience...
You are not old enough to visit the shop yet.
Products
Pulsar Pulsar Digex C50 Digital Day / Night Vision Rifle Scope With WIFI
Pulsar Digex C50 Digital Day / Night Vision Rifle Scope With WIFI This is the NON IR Version We here at Airgun 101 Shop think this scope has simply the best low light NON IR image on the market. Just our opinion. The Digex C50 is Pulsars next step for the Digex Series, incorporating a more powerful 1928x1088 FHD CMOS sensor which alongside SumLight functionality increases the units ability to observe high amounts of detail day or night.This new sensor and the updated design allow users to shoot in either black & white or full-colour vision, with a highly intuitive control dial (Aperture Adjustment Ring) located just in front of the Digexs objective lens focus ring for instant switching.Available in two models (was four but only two now, so stop waiting for the Non Wifi models they ain't coming back) - the Digex C50 without an IR Illuminator, the Digex C50 with IR (X850S) Illuminator.Please note that the Digex X850S IR Illuminator is also available for purchase as a separate accessory. Digex C50 models are also backwards compatible with X850 & X940 IR Illuminators (see individual products for more details).The Digex C50 has excellent optical capabilities, featuring a large 50mm objective lens (f/1.4) with a 3.5x base magnification and 4x digital zoom for a total of 14.0x magnification at a 6.7° field of view. These powerful optical characteristics combined with the optional X850S IR Illuminator allow the Digex C50 a distance detection of up to 550m. Power is provided to the Digex C50 via the intelligent dual battery system. This system consists of an internal, rechargeable battery and a rechargeable APS2 battery pack that can be recharged through the Digex itself (USB-C) or removed and charged with the dedicated APS battery charger (included). Models that include the X850S IR Illuminator will also include a removable & rechargeable APS2 battery pack for self-contained, optimised performance.The scopes exterior is made from a high-strength metal alloy and takes the shape of a traditional dayscope with a 30mm ring compatible body. Pulsar video on the instruction manual - Click HERE We do not ship this product outside of the UK.
£1,099.95
-
Sportsmatch Sportsmatch - 30mm Dovetail 9.5-11.5mm - Extra High - HT071
Sportsmatch - 30mm Dovetail 9.5-11.5mm - Extra High - HT071 30mm Diameter Body Tube High Range 3/8" Scope Mounts For 11mm dovetails / grooves up to 60mm lens diameter (on most rifles) Tube Diameter = 30mm Mount System = 9.5 -11.5 mm dovetail HT071
£41.99
-
Sportsmatch Sportsmatch - 30mm Dovetail 9.5-11.5mm - HT036C - 21mm Mounts
Sportsmatch - 30mm Dovetail High 9.5-11.5mm - HT036C - 21mm Mounts Tube Diameter = 30mm Mount System = 9.5 -11.5 mm Dovetail - High Model T036C
£34.99
-
Sportsmatch Sportsmatch - 30mm Dovetail 9.5-11.5mm - TO35C - 15mm Mounts
Sportsmatch - 30mm Dovetail 9.5-11.5mm - TO35C - 15mm Mounts 30mm Diameter Body Tube - Medium 15mm ( A ) Mounts Tube Diameter = 30mm Mount System = 9.5 -11.5 mm dovetail With Arrestor Pin Model TO35C TO35C - SportsMatch Website
£38.99
-
Sportsmatch Sportsmatch - 30mm Picatinny / Weaver - T078 - 15mm Mounts
Sportsmatch - 30mm Picatinny / Weaver - T078 - 15mm Mounts Single Thumb Turn mount Fits 30mm tube For Scopes Upto 50mm 2 PIECE MEDIUM WEAVER / PICATINNY 30mm A = 15mm B = 21mm Weight = 108g Includes square section hardenedsteel arrestor bolt.
£64.99
-
Tier One Tier One - Scope Mounts 30mm Picatinny High
Tier One - Scope Mounts 30mm Picatinny High These are 30mm Mounts. Tier One makes some of the best scope rings on the market, high quality with a super high finish to them, made from a single piece of aluminium so you know the rings are true. Ships in a box, with 2 x heads for the screws. Tier One Picatinny Rings are precision made on 5 axis CNC machinery. All sets come with one mount with a bubble level installed ( not both ) The key to accuracy in manufacture is to minimise the number of operations required to complete the machining process. By investing in new Technology, we have been able to cut the number of operations required from eight to two. By doing this, there is no accuracy loss due to re setting for different operations. All Rings are made from solid billets of Aluminium 7075T6 alloy and are available in medium and high configurations. Ring sizes from 1" up to 40mm Picatinny Rings available. Due to the precision of the manufacturing process, lapping is not required when mounted on a quality picatinny rail. Screws are stainless steel and manufactured by us on our own machines to the highest possible specification. WHAT CALIBERS ARE THESE RINGS FOR? We recommend torquing these rings to 18in/lbs because some scope manufacturers make their scopes from soft materials. Torquing any higher could cause marking or other damage to the scope tube. If you're torquing these rings to 18in/lbs then we don't recommend using them with magnum calibers. For magnum caliber rifles we highly recommend our one-piece mounting system, the Monomount. Or, the Tactical Rings, which are based on the Short Saddle mono but come in a two-piece format. Both have a much larger scope contact area. CAN I OVERTORQUE THE TOP RINGS? If you are happy that your scope is manufactured from a strong enough material to resist the extra pressure then you can, entirely at your own risk, torque them up to 26in/lbs as we do when using them on Magnum caliber rifles. IMPORTANT: You MUST check with your scope manufacturer before you do this and we take no responsibility if you mark or otherwise damage your scope tube. Tier One - From the Manufacturer Picatinny Ringset Mounting Instructions Our Picatinny Ringsets are manufactured to the highest tolerances, and it is advised to mount them on a suitable quality picatinny rail to get the optimum result. It is the purchaser’s decision to mount the picatinny rings and optic if they feel competent themselves, or seek advice from their favoured gunsmith. Place your unloaded firearm on a stable work surface, preferably mounted in a suitable gun vice. If no gun vice is available, the firearms own bipod can be utilised instead. It is now important to ascertain the correct eye relief. First loosen the clamp screws with the T25 Torx bit supplied to allow loose placement upon the picatinny rail, now remove the ring cap screws using the supplied T15 Torx bit, and gently attach the rings onto your picatinny rail, lightly tightening at this stage, ensuring the rear most one does not foul on the firearms bolt when worked. You now have a starting point to set your correct optic position. Place the optic into the rings and shoulder your firearm carefully, you may want to replace the ring caps very loosely to avoid letting your optic fall out of the mounts whilst doing this. As a guide, it is generally better if the rings are as far apart as possible to gain maximum strength and stability. Your optic should be set at the maximum magnification and if present, the parallax correction set to infinity. When viewing your optic from the shouldered position you should be able to see a clear image. If you can see a dark ring around the ocular lens gently move your optic fore or aft until this disappears. Great care should be taken at this point not to damage your optics finish. A pencil mark placed upon the optic as reference to the ring cap location will aid the final stage of mounting. You have now set the correct position for the ringset bases. Remove the ring caps and optic and tighten the T25 Torx screw on the ring claw to 4Nm, ensuring the ring bases are pushed firmly toward the muzzle to counter the effects of recoil. Now place your optic back into the rings using your pencil datum points as a guide, replace the ring caps, and using the T15 Torx bit in your fingers only, tighten the screws gently and evenly to maintain an equal gap between ring base and cap. Only light pressure is needed as it is important at this stage to be able to turn the optic in the rings without damage occurring to the finish. It is the installer’s decision to mount the optic by utilising the bubble built into the rear ring to level the rifle, and also a separate bubble placed upon the optics elevation turret cap, or by shouldering their firearm whilst viewing a suitable true vertical line, and rotating the optic gently until the bubble levels align, or the reticle matches the chosen vertical line. Care should again be taken at this stage to ensure no damage occurs to the optics outer finish. Once the installer is happy with the reticle alignment, the ring cap screws should be tightened gently and evenly, at opposing corners, whilst maintaining an equal gap to both sides, up to the recommended torque setting of 2Nm. Care at this stage should be taken to ensure your optic remains level, and doesn’t move during the tightening process.
£145.99£124.99
-
Tier One Tier One - Scope Mounts 30mm Picatinny Low
Tier One - Scope Mounts 30mm Picatinny Low These are 30mm Mounts. Tier One makes some of the best scope rings on the market, high quality with a super high finish to them, made from a single piece of aluminium so you know the rings are true. Ships in a display box, with 2 x heads for the screws. Tier One Picatinny Rings are precision made on 5 axis CNC machinery. All sets come with one mount with a bubble level installed ( not both ) The key to accuracy in manufacture is to minimise the number of operations required to complete the machining process. By investing in new Technology, we have been able to cut the number of operations required from eight to two. By doing this, there is no accuracy loss due to re setting for different operations. All Rings are made from solid billets of Aluminium 7075T6 alloy and are available in medium and high configurations. Ring sizes from 1" up to 40mm Picatinny Rings available. Due to the precision of the manufacturing process, lapping is not required when mounted on a quality picatinny rail. Screws are stainless steel and manufactured by us on our own machines to the highest possible specification. Low Mounts 30mm Picatinny Measurement A = 22mm WHAT CALIBERS ARE THESE RINGS FOR? We recommend torquing these rings to 18in/lbs because some scope manufacturers make their scopes from soft materials. Torquing any higher could cause marking or other damage to the scope tube. If you're torquing these rings to 18in/lbs then we don't recommend using them with magnum calibers. For magnum caliber rifles we highly recommend our one-piece mounting system, the Monomount. Or, the Tactical Rings, which are based on the Short Saddle mono but come in a two-piece format. Both have a much larger scope contact area. CAN I OVERTORQUE THE TOP RINGS? If you are happy that your scope is manufactured from a strong enough material to resist the extra pressure then you can, entirely at your own risk, torque them up to 26in/lbs as we do when using them on Magnum caliber rifles. IMPORTANT: You MUST check with your scope manufacturer before you do this and we take no responsibility if you mark or otherwise damage your scope tube. Tier One - From the Manufacturer Picatinny Ringset Mounting Instructions Our Picatinny Ringsets are manufactured to the highest tolerances, and it is advised to mount them on a suitable quality picatinny rail to get the optimum result. It is the purchaser’s decision to mount the picatinny rings and optic if they feel competent themselves, or seek advice from their favoured gunsmith. Place your unloaded firearm on a stable work surface, preferably mounted in a suitable gun vice. If no gun vice is available, the firearms own bipod can be utilised instead. It is now important to ascertain the correct eye relief. First loosen the clamp screws with the T25 Torx bit supplied to allow loose placement upon the picatinny rail, now remove the ring cap screws using the supplied T15 Torx bit, and gently attach the rings onto your picatinny rail, lightly tightening at this stage, ensuring the rear most one does not foul on the firearms bolt when worked. You now have a starting point to set your correct optic position. Place the optic into the rings and shoulder your firearm carefully, you may want to replace the ring caps very loosely to avoid letting your optic fall out of the mounts whilst doing this. As a guide, it is generally better if the rings are as far apart as possible to gain maximum strength and stability. Your optic should be set at the maximum magnification and if present, the parallax correction set to infinity. When viewing your optic from the shouldered position you should be able to see a clear image. If you can see a dark ring around the ocular lens gently move your optic fore or aft until this disappears. Great care should be taken at this point not to damage your optics finish. A pencil mark placed upon the optic as reference to the ring cap location will aid the final stage of mounting. You have now set the correct position for the ringset bases. Remove the ring caps and optic and tighten the T25 Torx screw on the ring claw to 4Nm, ensuring the ring bases are pushed firmly toward the muzzle to counter the effects of recoil. Now place your optic back into the rings using your pencil datum points as a guide, replace the ring caps, and using the T15 Torx bit in your fingers only, tighten the screws gently and evenly to maintain an equal gap between ring base and cap. Only light pressure is needed as it is important at this stage to be able to turn the optic in the rings without damage occurring to the finish. It is the installer’s decision to mount the optic by utilising the bubble built into the rear ring to level the rifle, and also a separate bubble placed upon the optics elevation turret cap, or by shouldering their firearm whilst viewing a suitable true vertical line, and rotating the optic gently until the bubble levels align, or the reticle matches the chosen vertical line. Care should again be taken at this stage to ensure no damage occurs to the optics outer finish. Once the installer is happy with the reticle alignment, the ring cap screws should be tightened gently and evenly, at opposing corners, whilst maintaining an equal gap to both sides, up to the recommended torque setting of 2Nm. Care at this stage should be taken to ensure your optic remains level, and doesn’t move during the tightening process.
£145.99£129.99
-
Tier One Tier One - Scope Mounts 30mm Picatinny Medium
Tier One - Scope Mounts 30mm Picatinny Medium These are 30mm Mounts. Tier One makes some of the best scope rings on the market, high quality with a super high finish to them, made from a single piece of aluminium so you know the rings are true. Ships in a box, with 2 x heads for the screws. Tier One Picatinny Rings are precision made on 5 axis CNC machinery. All sets come with one mount with a bubble level installed ( not both ) The key to accuracy in manufacture is to minimise the number of operations required to complete the machining process. By investing in new Technology, we have been able to cut the number of operations required from eight to two. By doing this, there is no accuracy loss due to re setting for different operations. All Rings are made from solid billets of Aluminium 7075T6 alloy and are available in medium and high configurations. Ring sizes from 1" up to 40mm Picatinny Rings available. Due to the precision of the manufacturing process, lapping is not required when mounted on a quality picatinny rail. Screws are stainless steel and manufactured by us on our own machines to the highest possible specification. WHAT CALIBERS ARE THESE RINGS FOR? We recommend torquing these rings to 18in/lbs because some scope manufacturers make their scopes from soft materials. Torquing any higher could cause marking or other damage to the scope tube. If you're torquing these rings to 18in/lbs then we don't recommend using them with magnum calibers. For magnum caliber rifles we highly recommend our one-piece mounting system, the Monomount. Or, the Tactical Rings, which are based on the Short Saddle mono but come in a two-piece format. Both have a much larger scope contact area. CAN I OVERTORQUE THE TOP RINGS? If you are happy that your scope is manufactured from a strong enough material to resist the extra pressure then you can, entirely at your own risk, torque them up to 26in/lbs as we do when using them on Magnum caliber rifles. IMPORTANT: You MUST check with your scope manufacturer before you do this and we take no responsibility if you mark or otherwise damage your scope tube. Tier One - From the Manufacturer Picatinny Ringset Mounting Instructions Our Picatinny Ringsets are manufactured to the highest tolerances, and it is advised to mount them on a suitable quality picatinny rail to get the optimum result. It is the purchaser’s decision to mount the picatinny rings and optic if they feel competent themselves, or seek advice from their favoured gunsmith. Place your unloaded firearm on a stable work surface, preferably mounted in a suitable gun vice. If no gun vice is available, the firearms own bipod can be utilised instead. It is now important to ascertain the correct eye relief. First loosen the clamp screws with the T25 Torx bit supplied to allow loose placement upon the picatinny rail, now remove the ring cap screws using the supplied T15 Torx bit, and gently attach the rings onto your picatinny rail, lightly tightening at this stage, ensuring the rear most one does not foul on the firearms bolt when worked. You now have a starting point to set your correct optic position. Place the optic into the rings and shoulder your firearm carefully, you may want to replace the ring caps very loosely to avoid letting your optic fall out of the mounts whilst doing this. As a guide, it is generally better if the rings are as far apart as possible to gain maximum strength and stability. Your optic should be set at the maximum magnification and if present, the parallax correction set to infinity. When viewing your optic from the shouldered position you should be able to see a clear image. If you can see a dark ring around the ocular lens gently move your optic fore or aft until this disappears. Great care should be taken at this point not to damage your optics finish. A pencil mark placed upon the optic as reference to the ring cap location will aid the final stage of mounting. You have now set the correct position for the ringset bases. Remove the ring caps and optic and tighten the T25 Torx screw on the ring claw to 4Nm, ensuring the ring bases are pushed firmly toward the muzzle to counter the effects of recoil. Now place your optic back into the rings using your pencil datum points as a guide, replace the ring caps, and using the T15 Torx bit in your fingers only, tighten the screws gently and evenly to maintain an equal gap between ring base and cap. Only light pressure is needed as it is important at this stage to be able to turn the optic in the rings without damage occurring to the finish. It is the installer’s decision to mount the optic by utilising the bubble built into the rear ring to level the rifle, and also a separate bubble placed upon the optics elevation turret cap, or by shouldering their firearm whilst viewing a suitable true vertical line, and rotating the optic gently until the bubble levels align, or the reticle matches the chosen vertical line. Care should again be taken at this stage to ensure no damage occurs to the optics outer finish. Once the installer is happy with the reticle alignment, the ring cap screws should be tightened gently and evenly, at opposing corners, whilst maintaining an equal gap to both sides, up to the recommended torque setting of 2Nm. Care at this stage should be taken to ensure your optic remains level, and doesn’t move during the tightening process.
£145.99£124.99
-
Wheeler Engineering Wheeler Pic Rail Scope Rings - 30mm - Anti Cant - High 15mm
Wheeler Pic Rail Scope Rings - 30mm - Anti Cant - High - 15mm Securely mount your scope to any picatinny rail. The 6-screw design provides increased clamping force to keep the optic in place during recoil and the integrated articulating anti-cant mechanism helps keep your gun level for your long range shots. Centerline height from top of rail: High - 1.100 in Top of Rail to bottom of mount 15mm 6061 aluminum construction with flat top on ring for leveling 6-hole ring design with retained lock nuts that secure to pic rail Integrated anticant level swing out Includes torx screws and tool
£82.98
-
Wulf Wulf / Sportsmatch HT071 30mm Extra High 2 Piece Scope Rings
Wulf / Sportsmatch HT071 30mm Extra High 2 Piece Scope Rings Sportsmatch also sell under the brand Wulf - same high quality product, but Sportsmatch make mounts for Wulf - so its the same. Two-piece double screw scope mounts. Includes Inc Easyfit arrestor pin. 9.5mm - 11.5mm dovetails 30mm Extra high Scope rings Fits lens diameters up to 56mm Extra high to clear large magazines and scopes with very large objective lenses. Can also be used to provide a higher head / cheek position MORE INFORMATION Sportsmatch, WULF Sportsmatch HT071 30mm Extra High 2 Piece Scope Rings HTO71 30 mm 2 Piece, Fixed 9-11mm
£32.99
-
Wulf WULF 1 Inch / 30mm Scope Accessory Mount Picatinny
WULF 1 Inch / 30mm Scope Accessory Mount Picatinny The perfect solution for mounting Torches or Lasers to your Rifle Scope. Available in a 1inch/30mm combo or 34mm Tube diameter. 1 per pack In the box? WULF 30mm Picatinny Scope Accessory Mount Allen Key Inserts for adapting to 1 Inch ( 25mm ) Plastic Inserts
£14.95
-
Wulf WULF 30mm / 1 inch Lightweight 1.5 inch Cantilever Bubble Level Mount
WULF 30mm / 1 inch Lightweight 1.5 inch Cantilever Bubble Level Mount This lightweight four screw skeletonised cantilever mount from WULF comes in a 30mm diameter and includes a pair of 1 inch ring reducers. The WULF 30mm / 1 inch lightweight bubble level mount gives you the correct height and offset for mounting your 30mm or 1 inch optic to your AR based rifle. 30mm tube diameter Includes 1 inch ring reducers Lightweight design Cantilever style to offer a longer eye relief Integral bubble level Popularity WULF 30mm / 1 inch Lightweight 1.5 inch Cantilever Bubble Level Mount SKU WU3032 Tube Diameter 1 inch, 30 mm Mount Type Cantilever Base Type 1 Piece
£40.95£29.95
-
Wulf WULF Hurricane 4.5-18x50 SFP Half Mildot MRAD Rifle Scope
WULF Hurricane 4.5-18x50 SFP Illuminated Half Mildot 0.1MRAD Side Focus Locking Turrets Rifle Scope Side focus down to 10 Meters The WULF Hurricane series of Rifle Scopes have been designed from the ground up to fit the needs of both Centrefire and Air Rifle shooters. The WULF Hurricane series of optics hits the sub £250 price point aggressively providing feature-rich models designed for multi-discipline use. Specs Magnification Range: 4.5-18x Objective Lens Diameter: 50mm Tube Diameter: 30mm F.O.V. @ 100yds: 27.7'-7.3' Eye Relief: 89mm (3.5 inches) Reticle: Illuminated Red/Green Half Mildot Reticle IR Battery:CR2032 Fitted Focal Plane: Second Focal Plane Click Value: 0.1 MRAD Total Elevation/Windage Adjustment (MRAD): 27 MRAD (92 MOA) Length (Inch): 13.6 Weight:734gms (26.2 ozs) Side Focus: Yes Parallax: 10yds - ∞ (9 Metres to Infinity) Lens Coating: XHT Fully Multi-Coated Warranty: WULF Titanium Lifetime Warranty 30mm Aluminium Main Tube Extreme Wide FOV Optical System Second Focal Plane Illuminated 5 Step Red/Green Half Mildot Reticle XHT Fully Multi-Coated Lenses – Superb high transmission lens coatings help to increase light transmission, resolution and colour fidelity. Tactical 0.1 MRAD Locking BDC Turrets Side Focus down to 10 Yards (9 Metres) Speed Focus Eyepiece Diopter Highlighted(Red) 10X for Mildot Calculations Nitrogen Purged Waterproof Shockproof Fogproof Rated for All Calibres In the Box WULF Hurricane 4.5-18x50 SFP Illuminated 0.1MRAD Rifle Scope. CR2032 Battery Fitted Deluxe Optical Grade Bikini Covers Wulf Lens Cleaning Cloth Instruction Manual We do not ship this product outside of England, Scotland and Wales.
£249.95£226.94
You have seen 61 out of 61 products