FX Airguns Removable Harmonic Barrel Tuner This is the removable version of the FX Harmonic Tuner. The Version we have has the soft touch finish over steel, the full retail finish, some pre realise versions did not have the soft touch finish. It screws onto any 1/2 Inch UNF Mod thread and then allows you to use one of the caliber specific threads on the front to step down for your moderator size. Caliber Threads included .177/.22 + .25 + .30 - not suitable for .35 Cal Weight Approx 190g Length Approx 6cm depending on setting USE THE CORRECT MODERATOR SCREW FOR YOUR CALIBER, USE THE SIZE TOO SMALL WILL CAUSE DAMAGE - WE ARE NOT RESPONSIBLE FOR THAT. This video is a guide only  

Read more less

FX Harmonic Adjustable Barrel Tuner Shroud 500mm STD Impact M3 Sub 12 Ft Lbs For the Standard Impact M3 Sub 12 with an overall barrel length of 500MM This will NOT fit the Maverick / Compact versions of Maverick Or Impact The one accessory that will have the biggest impact on the air gunning industry is the new FX Integrated Harmonic Barrel Tuner. This integrated shroud system offers new features that will change your tuning process and give you a level of precision control never before available to an airgun. The FX Integrated Harmonic Barrel Tuner offers both dampening and tuning features that will have you obtaining new heights of accuracy from your FX Airgun. FX Airguns teamed up with Chris Turek of Up North Air gunner to bring this exciting technology to an FX Airgun. The science behind barrel harmonics and internal ballistics has been debated and analysed for years. Though there are still unknowns, what is known is that barrel harmonics exist in all guns from a .177 break barrel airgun all the way up to a .50 cal Barret. These barrel harmonics are observable and are now adjustable for repeatability. This is the art of barrel tuning. The shroud of the Harmonic Barrel Tuner first works to dampen the barrel, making the harmonic signature of the barrel quieter, more subdued, and controllable. This, when combined with the new FX Carbon Fiber Liner Sleeve ( not included ) , also stiffen the barrel system which further lowers the barrel’s harmonic amplitude (or whip) throughout the entire shot cycle. Both of these factors combined create tighter shot groups, but are only part of the overall barrel tuning that the FX system brings. The finishing touch is found in the integrated rotating running weight located on the end of the shroud. Made from a specifically selected metallic alloy, this allows the running weight to have enough mass to affect the weight distribution of the overall barrel system. Shooters will find that even the smallest amount of rotating adjustment of the tuner weight by only a few thousands of an inch can change how your gun shoots groups, especially when shooting medium to long range distances. The beauty and genius of the FX Integrated Harmonic Barrel Tuner is realized with the single variable testing and tuning found both with the shroud system and internally with the new FX Impact M3. This intersection of beauty (form) and precision (function) will change the sport of precision airguns to the next level. This is a home install item. You will need to remove the existing shroud to install this item in place. We do not offer any install service. Any damage to your rifle, or any injury to any person through using or installing this product is not the responsibility of Airgun 101 Shop or its parent company. Safety first when working on any rifle, ensure the gun is safe before starting any form of work.

Read more less

Eagle Vision MZB-32 Muzzle Brake / Air Stripper with Interchangeable caliber  1/2 UNF Our new multi-caliber muzzle brake system can be used in different air rifles with various calibers.The interchangeable caliber adaptor can easily be swapped for another adaptor, with the tools provided. Interchangeable end adaptor to 1/2 UNF INCLUDED SHIPS WITH 1/2 UNF ADAPTER X 20, M14X1.25, M18X1, M20X1 OPTION - NOT INCLUDED There are no moving parts, all components are fully secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping.These products are manufactured by 5 Axis CNC tolerance of + or – 0.05 All our end adaptors can be used with future Eagle Vision sound moderators, muzzle brakes and harmonic barrel tuner models. The caliber specific adaptor helps to increase accuracy; The holes release air pressure from the sides helping to reduce the recoil. The front caliber adaptor with 8 holes, looks great and is designed so to allow insertion of the stainless steel bar tool, to tighten or loosen the adaptor. Caliber adaptors:.177, .22, .25 and .30 Some home assembly of muzzle break is required. SPECIFICATIONS MZB-32 Length: 55mm diameter: 32mm Weight: 40 grams End Thread: M23 X 1 Front Threads: M15X0.6 Product includes: 1x Muzzle Brake 4x O- rings 6x screws 1x Allen key 1x end adaptor of 1/2 UNF is included 2x stainless steel tool bar 1x Allen key 1x waterproof Storage Case 4x piece if caliber specific adaptor .177, .22, .25 and .30 (included 8x stainless steel tool bars)

Read more less

Eagle Vision MZB-40 Muzzle Brake / Air Stripper with Interchangeable caliber  1/2 UNF Our new multi-caliber muzzle brake system can be used in different air rifles with various calibers.The interchangeable caliber adaptor can easily be swapped for another adaptor, with the tools provided. Interchangeable end adaptor to 1/2 UNF INCLUDED SHIPS WITH 1/2 UNF ADAPTER X 20, M14X1.25, M18X1, M20X1 OPTION - NOT INCLUDED There are no moving parts, all components are fully secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping.These products are manufactured by 5 Axis CNC tolerance of + or – 0.05 All our end adaptors can be used with future Eagle Vision sound moderators, muzzle brakes and harmonic barrel tuner models. The caliber specific adaptor helps to increase accuracy; The holes release air pressure from the sides helping to reduce the recoil. The front caliber adaptor with 8 holes, looks great and is designed so to allow insertion of the stainless steel bar tool, to tighten or loosen the adaptor. Caliber adaptors:.177, .22, .25 and .30 Some home assembly of muzzle break is required. SPECIFICATIONS MZB-40 Length: 55mm diameter: 40mm Weight: 82 grams End Thread: M23 X 1 Front Threads: M15X0.6 Product includes: 1x Muzzle Brake 4x O- rings 6x screws 1x Allen key 1x end adaptor of 1/2 UNF is included 2x stainless steel tool bar 1x Allen key 1x waterproof Storage Case 4x piece if caliber specific adaptor .177, .22, .25 and .30 (included 8x stainless steel tool bars)

Read more less

FX Airguns - Panthera Barrel Weight Stainless Steel 90mm This FX Panthera 90 mm 250 gram barrel weight can be placed on the barrel of the Panthera by means of two Allen screws under the barrel shroud to balance and stabilize the weapon. This is designed for the FX Panthera 700mm barrel. This barrel weight for the FX Panthera has a length of 90 mm, weight of 250 grams and is made of stainless steel.

Read more less

Eagle Vision Universal Harmonic Barrel Tuner - Black STD Front End This is the Standard version of the barrel tuner. This version comes with the caliber adapters that screw into the front end of the tuner - these do not allow the addition of a moderator. Our new multi-caliber Universal Harmonic Barrel Tuner system can be used in different air rifles with various calibers. The interchangeable caliber adaptor can easily be swapped for another adaptor, with the tools provided. The front caliber adaptor with 8 holes, looks great and is designed so to allow insertion of the stainless steel bar tool, to tighten or loosen the adaptor. There are no moving parts, all components are fully secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping. These products are manufactured by 5 Axis CNC tolerance of + or – 0.05 Product includes: 1x Universal Harmonic Barrel Tuner choice of black or silver 4x O- rings 6x screws 1x Allen key 1/2 UNF X 20 End adapter for rifle connection 1x Allen key 1x waterproof Storage Case 4x piece of caliber specific adaptor .177, .22, .25 and .30 (included 8x stainless steel tool bars)

Read more less

Eaglevision - All in one – Muzzle Brake, Air Stripper & Harmonic Barrel Tuner MZHT-50S 1/2 UNF Fitting This stainless steel Air Stripper and harmonic all in one tuner is designed to balance the rifle. Our new multi-caliber all on one Tuner system can be used in different air rifles with various calibers. The interchangeable caliber adaptor can easily be swapped for another adaptor, with the tools provided. There are no moving parts, all components are fully secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping. These products are manufactured by 5 Axis CNC tolerance of + or – 0.05 All our end adaptors can be used with future Eagle Vision sound moderators, muzzle brakes and some harmonic barrel tuner models. The caliber specific adaptor helps to increase accuracy; The front caliber adaptor with 8 holes, looks great and is designed so to allow insertion of the stainless steel bar tool, to tighten or loosen the adaptor. Caliber adaptors:.177, .22, .25 and .30 Product specifications: MZHT-50S Length:  90.3mm diameter: 35mm Weight: 303 grams End Thread: M23 X 1 Front Threads: M15X0.6 Inner tube made of aluminium anodised Black outer adjustable tube made from stainless steel silver its natural colour. Product includes: 1x all in one main body  2x O-rings 6x grab screws 1x Allen key 1x end adaptor 1/2 UNF x 20 Each one includes: 2x stainless steel tool bar 1x Allen key 1x waterproof Storage Case 4x piece of caliber specific adaptor .177, .22, .25 and .30 (included 8x stainless steel tool bars) Product specifications: Length: 15mm Front Outside diameter: 19mm 177 Weight: 15gr 22 Weight: 14gr 25 Weight: 13gr 30 Weight: 12gr Threads: M15X0.6  Once fitted / used / fired through this product is regarded as used.

Read more less

Eaglevision - All in one – Muzzle Brake, Air Stripper & Harmonic Barrel Tuner MZHT-50B 1/2 UNF Fitting This Air Stripper and harmonic all in one tuner is designed to balance the rifle. Our new multi-caliber all on one Tuner system can be used in different air rifles with various calibers. The interchangeable caliber adaptor can easily be swapped for another adaptor, with the tools provided. There are no moving parts, all components are fully secured with ‘O’ rings to improve accuracy, limit vibration and avoid pellet clipping. These products are manufactured by 5 Axis CNC tolerance of + or – 0.05 All our end adaptors can be used with future Eagle Vision sound moderators, muzzle brakes and some harmonic barrel tuner models. The caliber specific adaptor helps to increase accuracy; The front caliber adaptor with 8 holes, looks great and is designed so to allow insertion of the stainless steel bar tool, to tighten or loosen the adaptor. Caliber adaptors:.177, .22, .25 and .30 Product specifications: MZHT-50B Length:  90.3mm diameter: 35mm Weight: 303 grams End Thread: M23 X 1 Front Threads: M15X0.6 Inner tube made of aluminium anodised Black outer adjustable tube made from stainless steel silver its natural colour. Product includes: 1x all in one main body  2x O-rings 6x grab screws 1x Allen key 1x end adaptor 1/2 UNF x 20 Each one includes: 2x stainless steel tool bar 1x Allen key 1x waterproof Storage Case 4x piece of caliber specific adaptor .177, .22, .25 and .30 (included 8x stainless steel tool bars) Product specifications: Length: 15mm Front Outside diameter: 19mm 177 Weight: 15gr 22 Weight: 14gr 25 Weight: 13gr 30 Weight: 12gr Threads: M15X0.6  Once fitted / used / fired through this product is regarded as used.

Read more less