VFG Weaponcare No.1 Cleaning Pellets .22cal 80 in pack – solid core. These are the GENUINE VFG Weaponcare cleaning pellets, as reviewed in Airgun Shooting magazine, link below. Only accept the Genuine Quality Cleaning Pellets. It is a hot topic - how clean do you need your barrel to be. Best answer is, when you feel accuracy has dropped off or you have never cleaned your barrel, just try and see if it makes an improvement to the accuracy of the rifle. With any new rifle it is always advised to clean the barrel first, and then zero. Spring / Gas Ram rifles are very likely to need cleaning due to the grime that can be projected forward by the spring / piston. PCP airguns do use air and pellets are not always the cleanest, so barrel cleaning can be vital. Top Tip - after shooting 50 shots, look at your fingers, the same dirt from the pellets that’s on your fingers just went down your barrel. Many different ways of using the cleaning pellets. (These are advisory): Possible Way No 1 - Drop a small amount of gun oil onto a Cleaning Pellet and push through with a rod. Possible Way No 2 - Insert Cleaning Pellet followed by a Lead Pellet and shoot. Possible Way No 3 - Insert a Lead Pellet, then a Cleaning Pellet, then another Pellet (making a sandwich) - check your rifle can do this first Possible Way No 4 - Small drop of gun oil onto the Cleaning Pellet and then fire Possible Way No 5 - Insert dry Cleaning Pellet and shoot   Airgun Shooting Expert Review It is advised to remove any moderator / silencer when possible Always shoot into something safe or downrange A cleaning pellet may still cause damage or injury. Airgun 101 is in no way liable for any damage / injury caused using this product.

Read more less

VFG Weaponcare No.1 Cleaning Pellets .177cal 100 in pack – solid core. These are the GENUINE VFG Weaponcare cleaning pellets, as reviewed in Airgun Shooting magazine, link below. Only accept the Genuine Quality Cleaning Pellets. It is a hot topic - how clean do you need your barrel to be. Best answer is, when you feel accuracy has dropped off or you have never cleaned your barrel, just try and see if it makes an improvement to the accuracy of the rifle. With any new rifle it is always advised to clean the barrel first, and then zero. Spring / Gas Ram rifles are very likely to need cleaning due to the grime that can be projected forward by the spring / piston. PCP airguns do use air and pellets are not always the cleanest, so barrel cleaning can be vital. Top Tip - after shooting 50 shots, look at your fingers, the same dirt from the pellets that’s on your fingers just went down your barrel. Many different ways of using the cleaning pellets. (These are advisory): Possible Way No 1 - Drop a small amount of gun oil onto a Cleaning Pellet and push through with a rod. Possible Way No 2 - Insert Cleaning Pellet followed by a Lead Pellet and shoot. Possible Way No 3 - Insert a Lead Pellet, then a Cleaning Pellet, then another Pellet (making a sandwich) - check your rifle can do this first Possible Way No 4 - Small drop of gun oil onto the Cleaning Pellet and then fire Possible Way No 5 - Insert dry Cleaning Pellet and shoot   Airgun Shooting Expert Review It is advised to remove any moderator / silencer when possible Always shoot into something safe or downrange A cleaning pellet may still cause damage or injury. Airgun 101 is in no way liable for any damage / injury caused using this product.

Read more less

Power Pellet Lube Spray - 25ml Now in a handy 25ml pump spray, same great product now even easier to apply, simply spray directly into a tin of pellets for dramatic increase in accuracy, and consistent power on any make or type of airgun pellet. Proven in use by world competition shooters, the sure way to guarantee performance. Do not spray directly onto or into the barrel or onto the gun. Expermientation is required, some washing and cleaning of pellets may be beneficial and always use a small amount first. Spray directly onto the tin of pellets and mix in gently, use sparingly to check results first. Lube cannot be removed once sprayed on. READ THE DIRECTIONS ON THE REAR OF THE PACKAGING.   The claims of accuracy improvement are made by the manufacturer and not Airgun 101. Airgun 101 is in no way responsible for any damage caused to any property or person when using this product.

Read more less

Napier Power Pellet Lube Bottle - 10ml Dropper bottle to add a few drops to a tin of pellets for dramatic increase in accuracy, and consistent power on any make or type of airgun pellet. Proven in use by world competition shooters, the sure way to guarantee performance. Do not add directly onto or into the barrel or onto the gun. Expermientation is required, some washing and cleaning of pellets may be beneficial and always use a small amount first. Drops directly onto the tin of pellets and mix in gently, use sparingly to check results first. Lube cannot be removed once sprayed on. READ THE DIRECTIONS ON THE REAR OF THE PACKAGING. TOP TIP - 5 - 6 drops is enough for a tin of 500 pellets - don't go mad, a little at a time.   The claims of accuracy improvement are made by the manufacturer and not Airgun 101. Airgun 101 is in no way responsible for any damage caused to any property or person when using this product.

Read more less

Wheeler FAT Torque Wrench With 10 Bit Set Wheelers FAT Wrench brings perfect consistency to every screw on your rifle! This amazing handheld torque wrench lets you apply repeatable, accurate torque settings to scope rings, guard screws and other screws, which aids in accuracy and decreases the opportunity for problems in the field. The FAT Wrench is a perfect compliment to the Deluxe Gunsmithing Screwdriver Sets. Together, they can ensure accurate tightening of most every screw on any gun in your collection. Bits are made from S2 Tool steel and hardened to 56-56 Rockwell "C" Torque adjustment range from 10 inch/pounds to 65 inch/pounds Accuracy plus/minus 2 inch/pounds up to 40 inch/pounds; 40-65 is /- 5% Convenient storage case included This video is from a third party Reviewer and is not connected with Airgun 101 Shop...but it might give you some idea of the prodcuct.

Read more less

C80 in pack – solid core. These are the GENUINE VFG Weaponcare cleaning pellets, as reviewed in Airgun Shooting magazine, link below. Only accept the Genuine Quality Cleaning Pellets. It is a hot topic - how clean do you need your barrel to be. Best answer is, when you feel accuracy has dropped off or you have never cleaned your barrel, just try and see if it makes an improvement to the accuracy of the rifle. With any new rifle it is always advised to clean the barrel first, and then zero. Spring / Gas Ram rifles are very likely to need cleaning due to the grime that can be projected forward by the spring / piston. PCP airguns do use air and pellets are not always the cleanest, so barrel cleaning can be vital. Top Tip - after shooting 50 shots, look at your fingers, the same dirt from the pellets that’s on your fingers just went down your barrel. Many different ways of using the cleaning pellets. (These are advisory): Possible Way No 1 - Drop a small amount of gun oil onto a Cleaning Pellet and push through with a rod. Possible Way No 2 - Insert Cleaning Pellet followed by a Lead Pellet and shoot. Possible Way No 3 - Insert a Lead Pellet, then a Cleaning Pellet, then another Pellet (making a sandwich) - check your rifle can do this first Possible Way No 4 - Small drop of gun oil onto the Cleaning Pellet and then fire Possible Way No 5 - Insert dry Cleaning Pellet and shoot   Airgun Shooting Expert Review It is advised to remove any moderator / silencer when possible Always shoot into something safe or downrange A cleaning pellet may still cause damage or injury. Airgun 101 is in no way liable for any damage / injury caused using this product.

Read more less

Wheeler Precision Micro Screwdriver Set Gunsmith Screwdriver set, with all the micro heads for the majority of requirements when it comes to taking care of your gun. 58 piece set with an organized carry/storage case Chrome plated steel bits Extendable handle from 3-3/4" to 5-1/2" 5-3/4" flexible extension shaft Bits are precision formed for maximum fastener engagement Individual bit markings Once opened this is a non-return product.

Read more less

Wheeler Space Saver Screwdriver Set Less than half the size of comparable gunsmithing screwdriver sets, the Wheeler Space Saver Gunsmithing Screwdriver Set takes up very little space on your bench, but contains a durable and comprehensive set of 26 bits chosen to meet most of your gunsmithing needs. Its also the perfect size to include on your trips to the range and the field. Included with the standard, Phillips, hex, and torx bits, is a 2 long 2 Phillips bit which is ideal for recoil pad installation, and a hex-to-square conversion bit which allows you to use 1/4 square drive sockets and other attachments. The magnetic handle is perfectly sized for gunsmithing needs, allowing you to carry a variety of bits if the need should arise. Includes a selection of the same high quality bits found in the Professional Gunsmithing Screwdriver Sets Includes standard Phillips, hex and torx bits 1-2" long 2 Phillips but which is ideal for recoil pad installation 1 hex-to-square conversion bit which allows you to use 1/4" square drive sockets and other attachments 1 magnetic handle is made of comfortable overmolded plastic

Read more less

Mineral Gun Oil by Bisley An excellent general purpose light mineral oil for all guns, accessories and equipment requiring a light viscocity oil. LubricatesProtects from rusting and corrosionPenetrates to loosen rust DO NOT use Gun Oil on the Internal workings of any airgun.  Airgun 101 Shop is not responsible for any harm or damage caused to any person or item when using this kit, always ensure the gun is safe before use.

Read more less

Wheeler FAT Digital F919 Wrench Wheelers Digital F.A.T. Wrench brings even more precise torque settings to the handheld torque wrench market. This amazing digital handheld torque wrench lets you apply repeatable, accurate torque settings to your scope rings, bows and other screws. The audible and visual indicators let the user know exactly when the desired torque setting has been achieved. The large range of 15-100 in/lbs. will aid in accuracy of all your screws and decreases the opportunity for problems in the field. The FAT Wrench Bits are built to last and are made from S2 tool steel and hardened to 56-56 Rockwell C. Bits are made from S2 Tool steel and hardened to 56-56 Rockwell "C" Ergonomic over molded design Large LCD Digital display for ease of viewing Audible indicator tone Full set of bits included This video is from an Australian Video Reviewer and is not connected with Airgun 101 Shop...but it might give you some idea of the prodcuct.

Read more less

VFG Weaponcare No.1 Cleaning Pellets .30cal / 8mm 50 in pack – small centre hole for pull through, (can use-pellet-on-top method for firing) These are the GENUINE VFG Weaponcare cleaning pellets, as reviewed in Airgun Shooting magazine, link below. Only accept the Genuine Quality Cleaning Pellets. It is a hot topic - how clean do you need your barrel to be. Best answer is, when you feel accuracy has dropped off or you have never cleaned your barrel, just try and see if it makes an improvement to the accuracy of the rifle. With any new rifle it is always advised to clean the barrel first, and then zero. Spring / Gas Ram rifles are very likely to need cleaning due to the grime that can be projected forward by the spring / piston. PCP airguns do use air and pellets are not always the cleanest, so barrel cleaning can be vital. Top Tip - after shooting 50 shots, look at your fingers, the same dirt from the pellets that’s on your fingers just went down your barrel. Many different ways of using the cleaning pellets. (These are advisory): Possible Way No 1 - Drop a small amount of gun oil onto a Cleaning Pellet and push through with a rod. Possible Way No 2 - Insert Cleaning Pellet followed by a Lead Pellet and shoot. Possible Way No 3 - Insert a Lead Pellet, then a Cleaning Pellet, then another Pellet (making a sandwich) - check your rifle can do this first Possible Way No 4 - Small drop of gun oil onto the Cleaning Pellet and then fire Possible Way No 5 - Insert dry Cleaning Pellet and shoot   Airgun Shooting Expert Review   It is advised to remove any moderator / silencer when possible Always shoot into something safe or downrange A cleaning pellet may still cause damage or injury. Airgun 101 is in no way liable for any damage / injury caused using this product.

Read more less

Wheeler 2023 Digital FAT Wrench Wheelers Digital F.A.T. Wrench (Firearm Accurizing Torque) brings precise torque settings to the handheld torque wrench market. This digital handheld torque wrench lets you apply repeatable, accurate torque settings to scope bases and rings, action screws, and more. The audible and visual indicators let the user know exactly when the desired torque setting has been achieved. The large range of 15-100 in-lbs. will aid in accurately torqueing screws to recommended specifications. The Digital F.A.T. Wrench includes 10 bits built to last, made from phosphate-coated S2 tool steel hardened to 56-58 Rockwell C. The included custom-molded case is perfect for storing the wrench and bits when not in use. Main Features Covers a wide variety of common gunsmithing tasks. LCD screen features live and peak modes for measuring torque. Torque adjustment range of 5-100 in-lbs. Covers a wide variety of common gunsmithing tasks including low torque red dot sights. Lcd screen features live and peak modes for measuring torque. Audible and visual indicators when desired torque is reached. Rubberized handle improves ergonomics for enhanced comfort and grip, reducing hand strain and fatigue. Hollow-ground flat bits create a precise fit to prevent damage to screws and firearms. Phosphate coating on bits and shaft prevents rust and corrosion. Premium latching hard case organizes and protects contents, keeping them secure and protected during transport and storage. This video is from an Australian Video Reviewer and is not connected with Airgun 101 Shop...but it might give you some idea of the prodcuct.

Read more less

SupaTool Driver Bits 33 Piece Cross Point: PH0, 2 x PH1, 2 x PH2, 2 x PH3 Slotted: 3mm, 4mm, 5mm, 6mm, 7mm Pozi: 2 x PZ1, 3 x PZ2, 2 x PZ3 Hex: 2mm, 2 5mm, 3mm, 4mm, 5mm, 6mm Torx T10, T15, T20, T25, T30, T40 1 pc 60mm Extension bar PVC organiser Sandblasted chrome vanadium steel bits NOT recommended for Impact Drivers, or high torque electric screwdrivers  Only recommended for hand tool use. 

Read more less

Drapers Tools Extra Long Precision Screwdriver Set (6 Piece) The extra long blades offer complete flexibility, ideal for those awkward delicate jobs. Manufactured with hardened chrome vanadium tips and durable soft grip handles. Display packed. Contents: 3 x plain slot screwdrivers: 2.5, 3.0, 4.0mm 3 x cross slot screwdrivers: No.000, No.00, No.0

Read more less

Wheeler Trigger Pull Scale The Wheeler Trigger Pull Scale accurately measures trigger pull weight from 8 ounces to 8 pounds. It features an ergonomically shaped handle for consistent direction of pull. Highly visible increment markings and easy to read sliding indicator that stays on the maximum weight registered make it easy to read. It measures in 2 ounce increments and is accurate to /- 2 oz. The trigger pull scale is an excellent tool for use when adjusting triggers to ensure accuracy and maintain safe performance. Accurately measures trigger pull Measures in 2 oz. increments Accurate to /- 2oz. Easy-to-read sliding indicator Range from 8 oz. to 8lbs

Read more less

Napier - Universal Cleaning Mat  Great for use in the home. Protect surfaces from scratches and chemicals. This super mat is big enough for any sporting rifle or shotgun, non slip neoprene base and a chemical/oil resistant synthetic suede work surface.Handy docking panel keeps cans and small parts in place, easily rolled up and carried whenever required. 138cm x 40cm Washable - Warm wash only and allow to air dry Oil Resistant Lint free work surface Protective Padding  

Read more less

SupaTool Socket Set 7" Reversible Ratchet Handle 3" Extension Bar 1/4" (M) x 3/8" (F) Adaptor Spin Disc 14 x 1/4" Dr SAE: 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32",1/2", 17/32", 9/16" 14 x 1/4" Dr Metric:4, 4 5, 5, 5 5, 6, 6 5, 7, 7 5, 8, 9, 10, 11, 12 and 13mm 3/8" Dr Metric: 14mm 3 x 1/4" Dr (8pt) SAE: 1/4", 5/16", 3/8" 3 x Hex Key Wrench Plastic Case NOT recommended for Impact Drivers, or high torque electric screwdrivers  Only recommended for hand tool use. 

Read more less

Drapers Tools Imperial Hexagon Key Set (8 Piece) Manufactured from chrome vanadium steel that's hardened and tempered. Held in plastic storage holder. Contents: 8 x Hex keys: 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4

Read more less