M4 Bubble Level - Eagle Vision Screws into the side of the Eagle Vision Mounts. One per Pack - Choose a Colour. Only Tested on Eagle Vision - will not fit other mounts mount and other accessories NOT Included

Read more less

Eagle Vision Fully Adjustable Picatinny Torch, Laser, Mount  1 per Pack This is the Micro Version of the fully adjustable windage and elevation mount, ideal for adding accessories and making them fully adjustable with ease. We are very proud of this product as it’s development resolves some issues for shooters, who depend on the reliability of a solid mount. Main benefits of using this mount: 1. Adjustability:FULLY ADJUSTABLE, FORWARD or BACKWARD , ELEVATION, WINDAGE, HEIGHT ADJUSTMENT, that allows the Accessoris to move vertically and horizontally along a guided path, and lockable in different positions, using 2x  screws on the side of this mount. 2. Longer range shooting:Pair of this mounts can be instal under any Picatinny scope mount and do elevation or hight adjustments for long range before running out of adjustment on the turretsis the ability for users who need to reach out further but are restricted by their current mounting system.By keeping the front mount at it’s lowest and elevating the rear mount to the highest point you can zero in your gun far beyond, without using the clicks on your turrets, hence keeping the optical centre of your scope intact. 3.Using Single can fully adjustable Windage/elevation, using pair can be only elevating Technical information for the new mount: Length: 60mmProfile height from bottom of the mount to middle of the top picatinny rail, 21mm.Total height: 30.30mmAdjustable Height: 4.5mmWeight: 81 grams Product includes: 1x Infinity picatinny Torch mount3 x Allen keys, (two different sizes)3 x side screws2 x m5 spring screw Torque calculation:Adjustable side screws maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.Picatinny nuts maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.

Read more less

Eaglevision Pard NV007S Adapter Tube This tube is designed to replace the Pard NV007S tube. This unit will not work alone as it has to be connected to our Pard Adapter Kit Made of aluminium. The size of threads is m42 x 0.6 pitch Length: 24mm Better than the cheap Ebay ones. Note - The photos are a generic photo and the Eaglevision logo is not on the first batch of adapters. Example of use - You have purchased a Pard Adapter Kit, with the A/V connector and you now wish to connect an S 007 Pard - this is the part you require to purchase.

Read more less

Infinity Forward Elevation Adjustable Picatinny Scope Mount 30mm Want a mount that moves forward to give more eye relief and elevation all in one. This  may be what your looking for. Give yourself that extra reach at long range - adding this mount gives more elevation to your scope and allows your favourite optic to add on rear mounted items without having to fully re-zero. Height: 68.25mm to 77.75 mm adjustable. Profile Height: 23 mm Adjustable Height: 9.5mm. Weight: 81 g each.  Centre of the ring to the bottom of the rail: 41mm (in closed position). Centre of the ring to the bottom of the rail: 51.5mm (in open position). Ring size: 30mm  Rail size: 20mm Picatinny   Picatinny Mounting ( purchase optional extra Pic to Dovetail adapter )  Bubble Mount included -will be a random colour.

Read more less

Pard NV007 Scope Holder Tube Replacement Night Vision Kit This unit is designed to replace the Pard NV007S tube. PLEASE BE AWARE - THIS S VERSION DOES NOT FIT THE V VERSION PARD. THIS WILL NOT FIT THE PARD NV007 SP - THE NEW MODEL WITH VERTICAL BATTERY. NV007A/V adapters are available - HERE The USH-46 goes over the scope eye relief and requires minimum 20mm / maximum 45mm space. If you have an IR Illuminated switch at the eye relief end, check your measurements. This unit can be connected to 99% of the scopes from eye relief outer with dimension of 40mm to 46.5mm and it will find the centre automatically while you are tightening it. TOTAL length: 69mm Our pard ring length: 24mm Made of aluminium. Package includes: 1 x Universal scope holder USH-46 1 x pard Adaptor ring PR-007S 1 x Storage case 1 x Silicon grease tube Please note: The Pard 007 is NOT included. DOES NOT FIT THE 007A/V

Read more less

Eagle Vision - 30mm Scope Ring Anti Can't Bubble Level Ring  A long-range shot has many factors to take into consideration to be sure you are on target – the EVC/LEVEL anti-cant system aids in the correction of ‘cant error’, giving you dead-on true vertical hold, just before you pull the trigger.The suspended bubble level with reflective platform, allows maximum light refraction for enhanced fluid illumination and sight acquisition, in all outdoor and harsh conditions.It is an anti-cant device that helps you hold your scoped gun level, plumb, and squared with the world for enhanced accuracy at longer ranges. Functions: Helps in keeping your rifle perfectly vertical for accurate long range shooting.Fits 30mm scopes.Quick and easy installation.High visibility bubble levels.Solid, durable construction.x 6 different colour bubble levesl to choos from.x 2 side attachments with M4 holes for our angle indicator picatinny rail or our future accessories. Package includes: x 1 scope ring bubble level.x 6 different bubble level colours: clear, yellow, green, red blue and black.x 2 two different size allen keys.x 2 bubble level holder screws.x 1 spare ring screw. Features: Ring size: 30mmWeights: 22gMaterial: 6061 aluminium, black anodised. To install you will need to establish your scope / rifle in a level position first. Then match the bubble level ring to the setting you require.

Read more less

Eagle Vision - 34mm Scope Ring Anti Can't Bubble Level Ring  A long-range shot has many factors to take into consideration to be sure you are on target – the EVC/LEVEL anti-cant system aids in the correction of ‘cant error’, giving you dead-on true vertical hold, just before you pull the trigger.The suspended bubble level with reflective platform, allows maximum light refraction for enhanced fluid illumination and sight acquisition, in all outdoor and harsh conditions.It is an anti-cant device that helps you hold your scoped gun level, plumb, and squared with the world for enhanced accuracy at longer ranges. Functions: Helps in keeping your rifle perfectly vertical for accurate long range shooting.Fits 34mm scopes.Quick and easy installation.High visibility bubble levels.Solid, durable construction.x 6 different colour bubble levesl to choos from.x 2 side attachments with M4 holes for our angle indicator picatinny rail or our future accessories. Package includes: x 1 scope ring bubble level.x 6 different bubble level colours: clear, yellow, green, red blue and black.x 2 two different size allen keys.x 2 bubble level holder screws.x 1 spare ring screw. Features: Ring size: 34mmWeights: 22gMaterial: 6061 aluminium, black anodised. To install you will need to establish your scope / rifle in a level position first. Then match the bubble level ring to the setting you require.

Read more less

Eagle Vision One Piece Infinity Elevation Adjustable Scope Mount Picatinny 30mm This well-designed scope mount allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws.The mount can be used as low profile or adjusted the to high profile too if your scope objective its too close to your rifle barrel or shroud.This practical patent helps shooters who enjoy long-range shooting and often run out of adjustment clicks on their turrets.The mount can also come handy if you have not been able to use your favorite scope due to lack of space between the rings or unusual position of your dovetail or picatinny rail on your gun.We are very proud of this product as it became a “must have” solution among people who love their bullpups.The design of the mount is dedicated to people who want to improve their performance contrasting with what ordinary mounts allow to do. By keeping the front mount at its lowest and elevating the rear mount to the highest point, you can zero in your gun far beyond what standard mounts allow you to do, without using the clicks on your turrets, hence keeping the optical centre of your scope intact (ideal situation for long range shooting). Please note:  DO NOT use more than 4x elevation screws as you may damage your mount.  Details: Height: 65 mm to 69.5 mm (adjustable) Profil Height: 21 mm Adjustable Height: 4.5 mm Weight: 92 gm each one Centre of the ring to the bottom of the rail: 38 mm in closed position Centre of the ring to the bottom of the rail: 42.5 mm in opened position Ring size: 34 mm  Rail size: 22 mm picatinny Item includes: 1 x  infinity scope mount 3 x allen key set – different sizes 4 x small spear screws 6 x large screws 1 x waterproof case Pressure calculation: Ring screws maximum Torque, 15-20 Inch-pounds Force to  1.68-2.25 NM Newton Meters. Adjustable side screws maximum Torque, 53-71 Inch-pounds Force to  6-8 NM Newton Meters. Picatinny nuts maximum Torque, 53-71 Inch-pounds Force to  6-8 NM Newton Meters.

Read more less

Eagle Vision Infinity Elevation Adjustable Scope Mount 30mm Ring Picatinny INS-30 Eagle Vision have designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This well-designed scope mount allows vertical movement along a guided path, and can be adjusted for low profile, and also for high profile settings. The INFINITY mounts are also lockable in different positions using two screws. INFINITY mounts are ideal for long range shooting and are extensively used for larger objective scopes, increasing space between your scope, barrel or shroud and enabling you to zero in your gun far beyond standard mounts. The design of the mount keeps the front mount lower and elevates the rear mount to a higher position. This in turn, is helpful for long-range shooters who find standard scope mount clicks on their turrets self running and unadjusted. Exceptionally well presented in the case and finished to a very high quality. Details: Hight: 60.7mm to 65.7mm (adjustable) Profile Hight: 21mm Adjustable Height: 4.5mm. Weight: 86g each one.  Centre of the ring to the bottom of the rail:  36mm (in closed position). Centre of the ring to the bottom of the rail: 40.5mm (in open position). Ring size: 30mm  Rail size: 20mm picatinny 2 x Alan Keys Included 4 x Small spare screws 1 x Large spare screw Protection Fabric Waterproof Case  Bubble Gauge NOT Included Do not remove the elevation screws unless the mount is fully raised / in the high / open elevation position or you will damage the mount.

Read more less

108 MOA One Piece Elevation Adjustable forward/Backward Picatinny 125 We have designed and developed an amazing new Picatinny mount.We are very proud of this product as its development resolves some issues for shooters, who depend on the reliability of a solid mount. This is the shorter version of the Original Pard Mount. 12.5cm Top Rail. Main benefits of using this mount: 1. NV scope:It can be directly fitted to the Pard 008 008P 008LRF ( will not fit NV008S ) 2. Adjustability:FULLY ADJUSTABLE, FORWARD or BACKWARD , ELEVATION, WINDAGE, EYE RELIEF AND HEIGHT ADJUSTMENT, that allows the scope to move vertically and horizontally along a guided path, and lockable in different positions, using 3x or 4x or 5x screws on the side of this mount. 3. Combined with a Scope cam:This mount allows users to adjust their scope forward, backwards, or adjust it vertically to align the scope with their eye relief or eye level.Users wishing to use their scope camera and record a session while shouldering their rifle, but the screen needs to be further to their eyes, or, for some applications they might require the camera to be closer to the eyes, such as pard/ Nightvision scopes etc. 4. Longer range shooting:long range before running out of adjustment on the turretsis the ability for users who need to reach out further but are restricted by their current mounting system.By keeping the front mount at it’s lowest and elevating the rear mount to the highest point you can zero in your gun far beyond, without using the clicks on your turrets, hence keeping the optical centre of your scope intact. 5. Multiple rifles:This system can be used to install scope mounts for the owner’s of multiple rifles who require to use one scope for all of their rigs by installing one Infinity mount to each rifle.They can zero then just swap the scope between them, with little need for turret click adjustment. 6. Durability:This product is robust enough to be installed on heavy recoil rifles, up to .308 caliber. Technical information for the new ‘INFINITY’ mount: Length: Top Rail 12.5cm / Bottom Piece 12.5cm / Rail Section 8cmProfile height from bottom of the mount to middle of the top picatinny rail, 21mm.Total height: 30.30mmAdjustable Height: 4.5mmWeight: 175 grams Product includes: 1x Infinity picatinny mount3 x Allen keys, (two different sizes)5 x side screws1x m5 spring screw4x pard 008 attachment screws1x Waterproof case Torque calculation:Adjustable side screws maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.Picatinny nuts maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.

Read more less

Eagle Vision Pard NV008 Mount - Windage + Elevation Adjustable Mini 125s This is the MINI version of the original Pard mount, only 12.5cm top rail size. Description: We have designed and developed an amazing new Picatinny mount.We are very proud of this product as it’s development resolves some issues for shooters, who depend on the reliability of a solid mount. Main benefits of using this mount: 1. NV scope:It can be directly fitted to the Pard 008 008P 008LRF ( Does NOT fit the Pard NV008S ) 2. Adjustability:FULLY ADJUSTABLE, FORWARD or BACKWARD , ELEVATION, WINDAGE, EYE RELIEF AND HEIGHT ADJUSTMENT, that allows the scope to move vertically and horizontally along a guided path, and lockable in different positions, using 3x or 4x or 5x screws on the side of this mount. 3. Combined with Scope cam:This mount allows users to adjust their scope forward, backwards, or adjust it vertically to align the scope with their eye relief or eye level.Users wishing to use their scope camera and record a session while shouldering their rifle, but the screen needs to be further to their eyes, or, for some applications they might require the camera to be closer to the eyes, such as pard/ Nightvision scopes etc. 4. longer range shooting:long range before running out of adjustment on the turretsis the ability for users who need to reach out further but are restricted by their current mounting system.By keeping the front mount at it’s lowest and elevating the rear mount to the highest point you can zero in your gun far beyond, without using the clicks on your turrets, hence keeping the optical centre of your scope intact. 5. Multiple rifles:This system can be used to install scope mounts for the owner’s of multiple rifles who require to use one scope for all of their rigs by installing one Infinity mount to each rifle.They can zero then just swap the scope between them, with little need for turret click adjustment. Technical information for the new ‘INFINITY’ mount: Length: 12.5cm / Base 12.5cm / Pic Rail 8cmProfile height from bottom of the mount to middle of the top picatinny rail, 21mm.Total height: 30.30mmAdjustable Height: 4.5mmWeight: 175 grams Product includes: 1x Infinity picatinny mount3 x Allen keys, (two different sizes)5 x side screws1x m5 spring screw4x pard 008 attachment screws1x Waterproof case Torque calculation:Adjustable side screws maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.Picatinny nuts maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.

Read more less

Eagle Vision - Two Piece Infinity Elevation Adjustable Scope Mount Picatinny 30mm This well-designed scope mount allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. The mount can be used as low profile or adjust the to high profile too if your scope objective its too close to your rifle barrel or shroud. This practical patent helps shooters who like to shoot long range and often run out of adjustment clicks on their turrets. The mount can also come handy if you have not been able to use your favourite scope due to lack of space between the rings or the odd position of your dovetail or picatinny rail on your gun. We are very proud of this product as it has become a “must have” solution among people who love their bullpups. The design of the mount is dedicated to people who want to improve their performance contrasting with what ordinary mounts allow to do. By keeping the front mount at its lowest and elevating the rear mount to the highest point, you can zero in your gun far beyond what standard mounts allow you to do, without using the clicks on your turrets, hence keeping the optical centre of your scope intact (ideal situation for long range shooting). Details: Height: 65 mm to 69.5 mm (adjustable) Profile Height: 21 mm Adjustable Height: 4.5 mm Weight: 92 g each Centre of the ring to the bottom of the rail: 38 mm in closed position Centre of the ring to the bottom of the rail: 42 mm in open position Ring size: 34 mm  Rail size: 22 mm picatinny Item includes: 2x Infinity scope mounts 1x Gift bubble level (random colour) 2x Allen key set – different sizes 4x Small spare screws 2x Large spare screws 1x Waterproof case 1x Lens air pump dust blower Pressure calculation: Ring screws maximum Torque, 15-20 Inch-pounds Force to  1.68-2.25 NM Newton Meters. Adjustable side screws maximum Torque, 53-71 Inch-pounds Force to  6-8 NM Newton Meters. Picatinny nuts maximum Torque, 53-71 Inch-pounds Force to  6-8 NM Newton Meters. Bubble level is a random colour

Read more less

Eagle Vision - Picatinny Swing Out Anti Can't Bubble Level Mount This is a fabulous little compact picatinny swing out bubble mount. Attach it on your picatinny rail under the scope or wherever you chose and get a bubble reading on how much your canting the rifle. Remember, Can't can make you miss - with this little device you get a bubble level reading on how level your holding the rifle and thus if you repeat your stance each time it will enable a more consistent shot and consistent accuracy. To set up, undo the flat head screw at the end. Put an o ring into the one end, slide in a level colour of choice, top off with the second o ring and then replace the screw.  DON'T over tighten the screw you will crush the bubble level, pinch tight...or you will break the level and then you have lost the colour. Functions: Helps in keeping your rifle perfectly set for accurate long range shooting.Quick and easy installation.High visibility bubble levels.Solid, durable construction.x 6 different colour bubble levesl to choos from.Attaches to a picatinny rail Package includes: x 1 picatinny swing out levelx 6 different bubble level colours: clear, yellow, green, red blue and black.x 1 allen key.x 2 o rings Features: Picatinny FittingWeights: 22gMaterial: 6061 aluminium, black anodised. 35mm Closed 62mm open Approx 20mm clearance needed under a scope ( may need to remove scope to fit )  A bubble level is only as good as your setup - ensure your rifle scope is fully level before you start - this is only useful if you start with a good setup.

Read more less

Eagle Vision Infinity Elevation Adjustable Scope Mount 34mm Ring Picatinny IPS-34 Special Offer SALE Eagle Vision have designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This well-designed scope mount allows vertical movement along a guided path, and can be adjusted for low profile, and also for high profile settings. The INFINITY mounts are also lockable in different positions using two screws. INFINITY mounts are ideal for long range shooting and are extensively used for larger objective scopes, increasing space between your scope, barrel or shroud and enabling you to zero in your gun far beyond standard mounts. The design of the mount keeps the front mount lower and elevates the rear mount to a higher position. This in turn, is helpful for long-range shooters who find standard scope mount clicks on their turrets self running and unadjusted. Exceptionally well presented in the case and finished to a very high quality. Details: Height - 65mm to 69.5mm ( adjustable ) Profile Height - 21mm Adjustable Height - 4.5mm Weight - 92g each Centre of the ring to the bottom of the rail - 38mm in closed postion Centre of the ring to the bottom of the rail - 42.4mm in open postion Ring Size 34mm Rail size - 20mm Picatinny 2 x Alan Keys Included 4 x Small spare screws 1 x Large spare screw Protection Fabric Waterproof Case  Bubble Gauge NOT Included Do not remove the elevation screws unless the mount is fully raised / in the high / open elevation position or you will damage the mount.

Read more less