Airgun & Air Rifle PCP Hand Pumps
FX Airguns FX Airguns - 4 Stage Stirrup Pump 500MM Hose 1/8 Thread
FX Airguns - 4 Stage Stirrup Pump 500MM Hose 1/8 Thread The new turbopump is equipped with a patented 4 stage system. It has a unique gearing system that gives you the opportunity to gear down when it gets rough. It allows the user to choose if they want high volume (300 cc) with lower pressure. Or low volume (200 cc) with higher pressure. Features:Pressure gauge, moisture trap, particle filter (replaceable), and bleed valve. Unique gearing system.Connections:Kevlar hose 0,5 m with 1/8 thread. Dimensions:Height 640mm (extracted 1090mm), Width: 205mm, Depth: 130mm. Weight:Approximately 2kg. You will need to fit your filling adapter onto the end, we suggest a small amount of thread seal tape and a pair of spanners to do this. Does not come with the fill probe pictured.
£187.99
Hill Hill 3-Stage Stirrup Pump Mk5 with dry pac
Hill 3-Stage Stirrup Pump Mk5 with dry pac The 5th Generation Hill PCP Pump with Dry-Pac. The trusted style and familiarity of Hill pumps on the outside but all new on the inside... Our Easiest Pump Yet - Around 20% easier to use for the average person Reach Higher Pressures - Our MK5 pump will reach 300 BAR / 4500 PSI and at a much easier rate for users. Quick Service - Faster and Easier than ever to service our MK5 pump than our previous generations. Patented Hill Dry-Pac System - Removes around 90% of moisture from the air going into your gun, giving you clean, dry air. This pump will require assembly at home. We are not responsible for any harm or damage caused by this product to any person or item or belonging. This uses High Pressure air and you must always be cautious using this product. Safety First .
£179.99£159.99
Umarex UX Umarex PCP Airgun Hand Pump
UX Umarex PCP Airgun Hand Pump The UX PCP Hand Pump enables manual filling of cartridges for commonly used air rifles. It is suitable for cartridges with 200 bar and 300 bar technology, which means that it covers the full range of Walther air rifles. For maximum usefulness the pump comes with four adapters: M10, M10x1, Foster and 1/8" Quickfill. This makes it suitable for a large number of air rifles on the market. The UX PCP Hand Pump was designed to permit quick filling of cartridges on the firing range or outdoors and does not require an external power supply or compressor. Users can recharge their air rifles with their own muscle power. Pressure can be read in bar and PSI from a practical gauge, and a folding stand is provided for simple transport and space-saving storage. HOME ASSEMBLY REQUIRED - WE DO NOT BUILD IT FOR YOU. PLEASE READ THE INSTRUCTIONS ON THIS LINK TO ENSURE YOU CAN BUILD IT. Instruction Manual HERE You will require your adapter for your airgun - not supplied unless otherwise stated.
£98.99
FX Airguns FX Airguns - 3 Stage Stirrup Pump 500MM Hose 1/8 Thread
FX Airguns - 3 Stage Stirrup Pump 500MM Hose 1/8 Thread The easiest, most convenient and affordable way to charge your airguns patented three way system gives you 200 bar with ease. Maximum fill pressure 250 bar. Features:Pressure gauge, moisture trap, particle filter (replaceable), and bleed valve. Connections: Kevlar hose 0,5 m with 1/8 thread. Dimensions:Height 615mm (extracted 1070mm), Width: 205mm, Depth: 130mm. Weight:Approximately 2kg. You will need to fit your filling adapter onto the end, we suggest a small amount of thread seal tape and a pair of spanners to do this. Does not come with the fill probe pictured.
£166.00